[ Top ] → Smart Array B120i SATA RAID in Embedded Slot| Report Section(s): | Identify Controller
Cache Config Status
Controller Parameters
Maintenance Operation
MNP Status
SubSystem Parameters
Surface Status
Sense Expansion Ability
VPD Page 80 - Serial Number
VPD Page 83 - Array Information |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → Identify Controller |
|---|
| Configured Logical Drives | 0 (0x00) |
| Configuration Signature | 0x001f1118 |
| RAM Firmware Revision | 5.50 |
| ROM Firmware Revision | empty |
| Hardware Revision | 0x05 |
| Boot Block Revision | empty |
| Drive Present Map | 0x00000000 |
| External Drive Map | 0x00000000 |
| Board ID | 0x006c1590 |
| Swapped Cable Flags | 0x00 |
| Non Disk Map | 0x00000000 |
| Bad Host RAM Addr | 0x00 |
| CPU Revision | 0x00 |
| PDPI Revision | 0x00 |
| EPIC Revision | 0x00 |
| WCXC Revision | 0x00 |
| Marketing Revision | C |
| Controller Flags | 0x8c| Position | Controller Flag | Status |
|---|
| 2 | Firmware has been upgraded to support capacity expansion operations that require more than 65535 sectors (32 MiB) to be relocated per expand iteration | Informational | | 3 | Firmware supports 15 drives per SCSI bus | Informational | | 7 | Firmware supports the new big drive assignment maps (128 bits) as well as the big physical drive numbering (0x80+) | Informational |
|
| Host Flags | 0x02 |
| Expand Disable Code | 0x00 |
| Protocol Chip Count | 0x01 |
| Maximum Blocks | 65535 (0x0000ffff) |
| Controller Clock | 0x00004f96 |
| Drives Per Bus | 0 (0x00) |
| Big Drive Present Map | All Zeroes (16 x [0x00]) |
| Big External Drive Map | All Zeroes (16 x [0x00]) |
| Big Non Disk Map | All Zeroes (16 x [0x00]) |
| Task Flags | 0x0100 |
| Busses For ICL | 0 (0x00) |
| Supported Redundant Controller Modes | 0x00 |
| Current Redundant Controller Mode | 0x00 |
| Redundant Controller Status | 0x00 |
| Redundant Failure Reason | 0x00 |
| Unsupported NILE Busses | 0x00 |
| Host I2C Autorev | 0x00 |
| CPLD Revision | 0x0f |
| Fibre Chip Count | 0 (0x00) |
| Daughterboard Type | 0x00 |
| More Swapped Cable Flags | 0x00 |
| License Key Status | 0x00| Position | License Key Status | Status |
|---|
| 3 | License Keys Supported False | Informational |
|
| Access Module Status | 0x00 |
| ADG Support | 0x00 |
| Features Supported | 0x00 0x00 0x78 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 |
| ROM Inactive Revision | empty |
| Active ROM Status | 0x00 |
| PPC to PCI Bridge Status | 0x00 |
| Redundant Server Info | 0x00000000 |
| Percent Write Cache | 0% (0x00) |
| Cache Size In MiB | 0 (0x0000) |
| Cache Battery Count | 0 (0x00) |
| Total Controller Memory Size | 0x0000 |
| More Controller Flags | 0xe8| Position | Controller Flag | Status |
|---|
| 3 | Firmware supports deferred code load drive firmware updates | Informational | | 5 | Controller implements SAS changes documented in the firmware spec | Informational | | 6 | Controller supports variable-length extended physical drive map and drive numbering | Informational | | 7 | Firmware supports greater than 2TB logical volumes | Informational |
|
| XBoard Host I2C Autorev | 0x00 |
| Battery PIC Revision | 0x00 |
| DDFF Version | 0202 |
| Maximum Logical Devices Supported | 8 (0x0008) |
| Extended Logical Unit Count | 0 (0x0000) |
| Maximum Physical Devices Supported | 32 (0x0020) |
| Maximum Physical Drives Per Logical Unit | 32 (0x0020) |
| Enclosure Count | 0 (0x00) |
| Expander Count | 0 (0x00) |
| Offset To Extended Drive Present Map | 290 (0x0122) |
| Offset To Extended External Drive Map | 294 (0x0126) |
| Offset To Extended Non Disk Map | 298 (0x012a) |
| Internal Port Status | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 |
| External Port Status | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 |
| Yet More Controller Flags | 0xfe51a205| Position | Controller Flag | Status |
|---|
| 0 | RAID with parity not supported | Informational | | 2 | Reorder logical drive operation is supported | Informational | | 9 | Ncq Supported | Informational | | 13 | PHY-to-PHY map is supported | Informational | | 15 | Sat Pass Through Read Supported | Informational | | 16 | Sat Pass Through Write Supported | Informational | | 20 | Fixed Fields Length Supported | Informational | | 22 | Sense Expansion Ability Supported | Informational | | 25 | Hba Mode Supported | Informational | | 26 | Controller Is Software Raid | Informational | | 27 | Cache Config Flags Supported | Informational | | 28 | Boot Volume Supported | Informational | | 29 | Periodic Sampling Supported | Informational | | 30 | Step Internal Option Rom Supported | Informational | | 31 | Flash Backed Write Cache Supported | Informational |
|
| Last Lockup | 0x00 |
| PCI Slot | 0 (0x00) |
| Firmware Build Number | 0x0000 |
| Maximum Safe Full Stripe Size MiB | 4 MiB (0x00000004) |
| Total Structure Length | 306 (0x00000132) |
| Vendor ID | HP |
| Product ID | B120i |
| Extended Last Lockup | 0x00000000 |
| Maximum RAID01 Stripe Size | 0xffff |
| Maximum RAID45 Stripe Size | 0x0400 |
| Maximum RAID6 Stripe Size | 0x0800 |
| Yet More Swapped Cable Flags | 0x0000 |
| Maximum Device Paths | 0x04 |
| Power Up NVRAM Flags | 0x00 |
| Offset To Zoned In Drive Map | 0 (0x0000) |
| Fixed Structure Length | 290 (0x00000122) |
| Firmware Compile Time Stamp | Dec 8 2015 16:57:25 |
| Even More Controller Flags | 0x0040f630| Position | Controller Flag | Status |
|---|
| 22 | Rsync Rollback Supported | Informational |
|
| Host Initialization Code | 0x0000 |
| Orca Image Size | 0x0000 |
| Option ROM Version | 3.54 |
| Option ROM Build | 0x0000 |
| Encryption Status | 0x00000000 |
| Extra Controller Flags | 0x00000000 |
| PCIE Generation | 0x00 |
| PCIE Width | 0x00 |
| Current Controller Mode | Not Redundant (0x00) |
| Part Number | empty |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → Cache Config Status |
|---|
| Cache Disabled Map | 0x00000000 |
| Read Cache Size | 0 (0x0000) |
| Write Cache Size | 0 (0x0000) |
| Disable Flag | Disabled (0x01) |
| Offset To Extended Cache Disabled Map | 0 (0x0000) |
| Offset To Extended Cache Failure Map | 0 (0x0000) |
| Offset To Extended Read Cache Disabled Map | 0 (0x0000) |
| Cache Configuration Flags | 0x00 |
| Total Structure Length | 280 (0x00000118) |
| Maximum Logical Devices Supported | 64 (0x0040) |
| Offset To Extended Write Cache Disabled Map | 0 (0x0000) |
| Fixed Structure Length | 256 (0x00000100) |
| Cache Flags | 0x00000000 |
| Cache Disable Code | 0x0000 |
| Total Cache Memory Size | 64 MiB (0x0040) |
| Battery Count | 0 (0x0000) |
| Battery Status | 0x0000 |
| Parity Read Errors | 0 (0x0000) |
| Parity Write Errors | 0 (0x0000) |
| Error Log | All Zeroes (160 x [0x00]) |
| Failed Batteries | 0 (0x0000) |
| Board Present | 0x00 |
| Cache Failure Map | 0x00000000 |
| Max Error Log Entries | 12 (0x0c) |
| NVRAM Load Status | 0x00 |
| Memory Size Shift Factor | 10 (0x0a) |
| Non Battery Backed Memory Size | 64 MiB (0x0040) |
| Memory State | 0x00 |
| Cache Auto Rev | 0x00 |
| Total Controller Memory Size | 0 (0x0000) |
| Percent Read Cache | 0% (0x00) |
| Percent Write Cache | 0% (0x00) |
| Default Percent Read Cache | 0% (0x00) |
| Default Percent Write Cache | 0% (0x00) |
| Installed Batteries | 0x0000 |
| Cache Support Flags | 0x1c |
| Reserved2 | 0x00 |
| Detailed Battery Status | All Zeroes (16 x [0x00]) |
| Detailed Flashlight Hardware Status | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → Controller Parameters |
|---|
| LED Flag | 0x00 |
| Command List Verification | 0x00 |
| Backed Out Write Drives | 0 (0x00) |
| Parity Stripes | 0x0000 |
| Controller Configuration Flags | 0x00| Position | Controller Configuration Flag | Status |
|---|
| 2 | Inconsistency Repair Policy Disabled | Informational | | 3 | Degraded Performance Optimization Disabled | Informational |
|
| Queue Depth | 0xffff |
| Elevator Trend | 0x0032 |
| Elevator State | Enabled (0x00) |
| Force Scan Complete | 0x00 |
| Forced Transfer Mode | Automatic Detection (0x00) |
| Forced Transfer Width | Automatic Detection (0x00) |
| Rebuild Priority | Medium (0x00) |
| Expand Priority | Medium (0x00) |
| Host Sdb ASIC Fix | 0x00 |
| PDPI Burst Disabled | 0x00 |
| Software Name | empty |
| Hardware Name | empty |
| Bridge Revision | 0x00 |
| Snapshot Priority | 0x00 |
| OS Specific | 0x00000000 |
| POST Prompt Timeout | 0x00 |
| Automatic Drive Slamming | 0x00| Position | Automatic Drive Slamming | Status |
|---|
| 0 | Disabled | Informational |
|
| Device Path Selection Method | Automatic (0x00) |
| NVRAM Flags | 0x00 |
| Cache NVRAM Flags | 0x00 |
| Drive Configuration Flags | 0x00| Position | Drive Configuration Flag | Status |
|---|
| 0 | Drive Write Cache Disabled | Informational | | 2 | Skip Never Accessed Regions During Expansion Enabled | Informational | | 3 | Skip Never Accessed Regions During Rebuild Enabled | Informational |
|
| Over Temperature Warning | 0x00 |
| Over Temperature Shutdown | 0x00 |
| Over Temperature Condition Cancelled | 0x00 |
| Max Coalesce Commands | 1 (0x01) |
| Max Coalesce Delay | 0 microseconds (0x00000000) |
| ORCA Password | empty |
| Access ID | empty |
| Primary Boot LUN | 0x60 0x05 0x08 0xb1 0x00 0x1c 0x48 0xac 0x88 0xee 0x93 0x62 0xcf 0x05 0x02 0xc4 |
| Secondary Boot LUN | 0x60 0x05 0x08 0xb1 0x00 0x1c 0x48 0xac 0x88 0xee 0x93 0x62 0xcf 0x05 0x02 0xc4 |
| Total Structure Length | 204 (0x000000cc) |
| RAM Drive Number | 0x0000 |
| RAM Drive Size In Mi B | 0x0000 |
| More Config Flags | 0x00000000 |
| More NVRAM Flags | 0x00000000 |
| Elevator Latency Setting | 0x0000 |
| Connector Mode | Unknown (All Zeroes (16 x [0x00])) |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → Maintenance Operation |
|---|
| Duration | 0 second(s) (0x00000000) |
| Elapsed | 0 second(s) (0x00000000) |
| Maintenance Flags | All Zeroes (256 x [0x00]) |
| Offset To Extended Maintenance Flags | 276 (0x0114) |
| Maximum Physical Devices Supported | 32 (0x0020) |
| Total Structure Length | 308 (0x00000134) |
| Fixed Structure Length | 276 (0x00000114) |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → MNP Status |
|---|
| Current Drive | 0x0000 |
| Timer Remaining | 0 minute(s) (0x0000) |
| MNP Delay | 0 minute(s) (0x0000) |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → SubSystem Parameters |
|---|
| Controller Slot Number | 0 (0x00) |
| Chassis Serial Number | CZ1626013G |
| Port Name | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) |
| Controller Serial Number | empty |
| Cache Serial Number | empty |
| Linked Port Name | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 |
| Linked Controller Serial Number | empty |
| Linked Cache Serial Number | empty |
| System Board Serial Number | empty |
| Power Backplane Serial Number | empty |
| SCSI Drive Backplane Serial Number | empty |
| Fan Module Serial Number | empty |
| Power Supply 0 Serial Number | empty |
| Power Supply 1 Serial Number | empty |
| Power Bay Fan Module Serial Number | empty |
| Fibre Daughter Board Serial Number | empty |
| Node Name | empty |
| Drive Backplane 1 Serial Number | empty |
| Fan Module 1 Serial Number | empty |
| Internal Port Count | 6 (0x06) |
| External Port Count | 0 (0x00) |
| Internal Port Info | | Index | Controller Phy Map | Physical Port |
|---|
| 0 | 0x0000000000000001 | 1I | | 1 | 0x0000000000000002 | 2I | | 2 | 0x0000000000000004 | 3I | | 3 | 0x0000000000000008 | 4I | | 4 | 0x0000000000000010 | 5I | | 5 | 0x0000000000000020 | 6I | | 6 | 0x0000000000000000 | empty | | 7 | 0x0000000000000000 | empty |
|
| External Port Info | | Index | Controller Phy Map | Physical Port |
|---|
| 0 | 0x0000000000000000 | empty | | 1 | 0x0000000000000000 | empty | | 2 | 0x0000000000000000 | empty | | 3 | 0x0000000000000000 | empty | | 4 | 0x0000000000000000 | empty | | 5 | 0x0000000000000000 | empty | | 6 | 0x0000000000000000 | empty | | 7 | 0x0000000000000000 | empty |
|
| Product ID | empty |
| Total Structure Length | 1260 (0x000004ec) |
| Additional Internal Port Info | | Index | SAS Address | Connection Number | Connection Mode | Conn Mode Support |
|---|
| 0 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 1 | 0000000000000001 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01) | 0x00 | RAID (0x00) | 0x00 | | 2 | 0000000000000002 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x02) | 0x00 | RAID (0x00) | 0x00 | | 3 | 0000000000000003 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x03) | 0x00 | RAID (0x00) | 0x00 | | 4 | 0000000000000004 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04) | 0x00 | RAID (0x00) | 0x00 | | 5 | 0000000000000005 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x05) | 0x00 | RAID (0x00) | 0x00 | | 6 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 7 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 |
|
| Additional External Port Info | | Index | SAS Address | Connection Number | Connection Mode | Conn Mode Support |
|---|
| 0 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 1 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 2 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 3 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 4 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 5 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 6 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 | | 7 | 0000000000000000 (0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00) | 0x00 | RAID (0x00) | 0x00 |
|
| Controller Temperature | 0x00 |
| Cache Module Temperature | 0x00 |
| Supercap Temperature | 0x00 |
| HBA Firmware Version | All Zeroes (16 x [0x00]) |
| HBA Mode Option ROM Version | All Zeroes (16 x [0x00]) |
| Cache Module Data Width | 0x0000 |
| Cache Module Xfer Rate | 0x0000 |
| Cable Info | | Cable State | Vendor Part Number | Vendor Revision | Vendor Serial Number | Cable Length |
|---|
| 0x00000000 | All Zeroes (16 x [0x00]) | 0x00 0x00 | All Zeroes (16 x [0x00]) | 0x0000 | | 0x00000000 | All Zeroes (16 x [0x00]) | 0x00 0x00 | All Zeroes (16 x [0x00]) | 0x0000 | | 0x00000000 | All Zeroes (16 x [0x00]) | 0x00 0x00 | All Zeroes (16 x [0x00]) | 0x0000 | | 0x00000000 | All Zeroes (16 x [0x00]) | 0x00 0x00 | All Zeroes (16 x [0x00]) | 0x0000 | | 0x00000000 | All Zeroes (16 x [0x00]) | 0x00 0x00 | All Zeroes (16 x [0x00]) | 0x0000 | | 0x00000000 | All Zeroes (16 x [0x00]) | 0x00 0x00 | All Zeroes (16 x [0x00]) | 0x0000 | | 0x00000000 | All Zeroes (16 x [0x00]) | 0x00 0x00 | All Zeroes (16 x [0x00]) | 0x0000 | | 0x00000000 | All Zeroes (16 x [0x00]) | 0x00 0x00 | All Zeroes (16 x [0x00]) | 0x0000 |
|
| Current Controller Powerm W | 0x00000000 |
| Connector Name Internal | | Connector Name |
|---|
| 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 |
|
| Connector Name External | | Connector Name |
|---|
| 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 |
|
| Reserved 1 | All Zeroes (336 x [0x00]) |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → Surface Status |
|---|
| Current Drive | 0x0000 |
| Current Head | All Zeroes (32 x [0x00]) |
| Current Cylinder | All Zeroes (32 x [0x0000]) |
| Timer Remaining | 0 second(s) (0x0000) |
| Surface Delay | 0 second(s) (0x0000) |
| Current Block | All Zeroes (32 x [0x00000000]) |
| Surface Analysis Status | 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 |
| Inconsistent Block | All Zeroes (8 x [0x00000000]) |
| Surface Analysis Pass Time | All Zeroes (32 x [0x00000000]) |
| Surface Analysis Pass Count | All Zeroes (32 x [0x00000000]) |
| Controller Resets | All Zeroes (32 x [0x0000]) |
| Blocks Reassigned | All Zeroes (32 x [0x00000000]) |
| Big Current Block | All Zeroes (128 x [0x00000000]) |
| Big Surface Analysis Status | All Zeroes (32 x [0x00]) |
| Big Inconsistent Block | All Zeroes (32 x [0x00000000]) |
| Current Volume | 0xffff |
| Initialization Percentage Complete | 0% (0x00) |
| Offset To Extended Surface Analysis Status | 0 (0x00000000) |
| Offset To Extended Surface Analysis Pass Time | 0 (0x00000000) |
| Offset To Extended Surface Analysis Pass Count | 0 (0x00000000) |
| Offset To Extended Controller Resets | 0 (0x00000000) |
| Offset To Extended Blocks Reassigned | 0 (0x00000000) |
| Offset To Extended Inconsistent Block | 0 (0x00000000) |
| Offset To Extended Current Block | 0 (0x00000000) |
| Total Structure Length | 3618 (0x00000e22) |
| Maximum Logical Devices Supported | 64 (0x0040) |
| Maximum Physical Devices Supported | 32 (0x0020) |
| Fixed Structure Length | 1442 (0x000005a2) |
| Offset To Volume Parity Inconsistencies Repaired | 0 (0x00000000) |
| Offset To Drive Parity Inconsistencies Repaired | 0 (0x00000000) |
| Offset To Extended Initialization Percent Complete | 0 (0x00000000) |
| Max Parallel Scan Limit | 0x00 |
| Current Parallel Scan Limit | 0x00 |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → Sense Expansion Ability |
|---|
| Support Flags | 0x00000010| Position | Support Flag | Status |
|---|
| 0 | Volume Expansion Not Supported | Informational | | 1 | Stripe Size Migration Not Supported | Informational | | 2 | Raid Level Migration Not Supported | Informational | | 3 | Logical Drive Extension Not Supported | Informational | | 4 | Expansion Memory Size Field Applicable | Informational |
|
| Expansion Memory Size | 0 (0x00000000) |
| Transformation Capability Status | All Zeroes (32 x [0x00]) |
| Offset To Extended Transformation Capability Status | 52 (0x0034) |
| Maximum Logical Devices Supported | 64 (0x0040) |
| Total Structure Length | 116 (0x00000074) |
| Fixed Structure Length | 52 (0x00000034) |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → VPD Page 80 - Serial Number |
|---|
| Product Serial Number | |
| [ Top ] → [ Smart Array B120i SATA RAID in Embedded Slot ] → VPD Page 83 - Array Information |
|---|
| Array | | Code Set | Identifier Type | Association | Identifier Length | Identifier |
|---|
| 0x02 | 0x00 | 0x00 | 0x10 | All Zeroes (16 x [0x00]) | | 0x01 | 0x00 | 0x00 | 0x04 | 0x00 0x00 0x00 0x00 |
|