Aktueller Inhalt von DemonAk

Kingston ValueRAM CUDIMM 64GB, DDR5-6400, CL52-52-52 KVR64A52BD8-64 https://geizhals.de/kingston-valueram-cudimm-64gb-kvr64a52bd8-64-a3387500.html

I did a full memory training for 9 minutes, screenshot below with procdqds 34.3 I get a lot of errors #2, #10 with procdqds 40 I get 6 errors #2 and 2 errors #10 with procdqds 48 I get 3 errors #2 and 1 error #10 with procdqds 60 there are no errors #2 but there are errors #10, #1, #5, #11 with...

I still get bsod (system service exception) and errors 0-6 after force memory training somewhere around 3.4 times, and it happened even on the 10th memory training. I managed to take a screenshot with rtt_wr5 and procdq40 (before this I calmly completed 8 passes of TM5), and before that I took...

ran into a problem cold boot, passed tm5, after reboot get errors 6, 0. this does not always happen, it is difficult to detect maybe it’s due to an incorrectly selected vddq, I don’t like that at the load shows 1.215v vddq 1.22 (hwinfo 1.215-1.245) 1.23 (hwinfo 1.215-1.245) 1.24 (hwinfo...

2 minutes. With values 1-0-0-1 training time 3:30 minutes Yes, i can. Training time with auto ~9 minutes What the motherboard offers by default does not suit me, I mean: TX DFE Taps = 2 taps RX2D voltage step size (2^n) = 2 TX2D voltage step size (2^n) = 2 RX DFE Taps = 2 taps I never go...

So, I tighten up the timings, passed 25 TM5 cycles. Perhaps i can improve some timings. Screen below by the way I use for all tests TX DFE Taps = 1 taps RX2D voltage step size (2^n) = 1 TX2D voltage step size (2^n) = 1 RX DFE Taps = 1 taps The POST goes through and loads into Windows with...

testing now 6000Mhz 4x32gb with auto timing and get error in y-cruncher N63 after 2 hours with combo tests (FFT,N63,VT3), SOC was 1.24 LLC2, after that i increase SOC to 1.25 and pass separate N63 2-hours (71pass), also passed separate 2 hour tests FFT and VT3 . Issue with SOC or VDDIO/VDDQ or...

I don't have "4" =] Only auto, 1,2, disable for Nitro Rx Data and auto, 0,1,2,3 disable for Nitro Tx Data

This uefi default settings, pictures below Well, apparently I’ll have to train for 9 minutes, but if I turn off the MCR, then I’ll have to wait 9 minutes after each reboot :heul:

Yes, I can choose auto settings. Do you mean that I need to put all nitro settings in auto? or also set auto in AMD settings-->CBS-->DDR Options-->DDR Training Options Nitro is currently disabled (default enabled, robust enabled and 2,3,1). In general, it seems to me that nitro doesn’t work...

no, default all 2 (dfe rx tx taps and voltage steps). This is what I was trying to find I'm just trying different values in the hope of finding something that will bring stability. I can’t understand why, after forcing the training, errors and bsods immediately pop up, then I do the training...

Ok. I think I found the reason. DFE Read Training = Auto/Enabled makes my ram unstable. I am still testing my 5800 Mhz but seems stable, i did force retraining couple times. Perhaps DFE Read does not work correctly on Asrock boards or specifically on mine, or the reason is in the memory itself...

Hi all. Need your advice. Motherboard asrock x670e taichi, bios 2.08, i have 4x32gb hynix a-die 4x32gb OEM 5800 not stable anymore on new bioses and can't sable 5800, 6000 because every retraining memory a got immediatly bsod or many errors y-cruncher VT3 but sometimes i can pass VT3 ~30 minutes...

Asrock update bioses silent for b550 taichi and others mb 1. Update AMD AM4 AGESA Combo V2 PI 1.2.0.7 2. Improve memory compatibility. https://www.asrock.com/support/index.asp?cat=BIOS

Asrock B550 Updates AMD AGESA ComboAM4v2 1.2.0.0: B550 Extreme4 1.90 B550 PG Velocita 1.90 B550 Phantom Gaming-ITX/ax 2.00 B550 Steel Legend 1.90 B550M Phantom Gaming 4 1.50 B550M Pro4 1.80 B550M Steel Legend 1.90 B550M/ac 1.70 B550M-HDV 1.70