Suchergebnisse

high voltages don't do anything for 6800xt at 2800mhz limit, sometimes they help with high flck but I'm not 100% sure either, they would be useful if there was no gpu and memory clock limit, unfortunately You're getting to the point I'm at now that there's nothing to improve in MPT to increase...

with 2x 6900xt it's not enough to just plug it in and fire TS even without crossfire , because there are already 100 people on the list , with the combination of 6900xt+6800xt it may be ok as long as it puts You in a lower category (6800xt x2)

What competition are You talking about when 61 people from all over the world applied for the TS test with 2x6800xt? it's enough to put 2x6800xt in a computer without even connecting them in crossfire and you're already at 62nd place on the list.

thanks for the info, it's always an average of 50mhz more for synthetic tests, but only for this reason I will not solder the card, I will stay with the software

Done, piece of cake https://www.3dmark.com/fs/26773321 how about You share the 2830mhz trick, buddy?

You can have high voltages in TS and drops in idle , if You turn on the DS , but in TS You will have worse v results, You can't eat cake and have cake , there's always something for something

You forgot to ask about the trick at 2830 mhz, because my question didn't seem to be noticed by our colleague 😋

I see it's 412W, 350+15% in the end, but for a 6900xt that's nothing, my 6800xt on lower clocks (2700-2800 in wattman) is hitting 500W in TS, so in my opinion your card is bouncing around the power limit which results in worse performance, try rise power limit to 500W, and check then

where You se 1,5V? 1639140382 THAT MEANS WARRRRR!!!!! :fresse2:

The card is fine, You boosted the voltage so it draws more power, but in MPT You muzzled it at 350W so the frequency drops and the result is poor You can see it in 3dmark graph You posted, especially in 2nd test where gpu core goes down to 2000mhz, raise power limits to 500W just keep an eye on...

I see that colleague Butanding1987 is with us, welcome colleague, maybe You can share with other 6800xt owners the trick to get 2830mhz clock on these cards, always an extra 50 mhz would be useful to beat Your results 😜 , we openly show our settings here, so that everyone can benefit from the...

I don't know why You bother and why dredge up the subject, 3dmark's reliability shows such results: https://www.3dmark.com/fs/26728437 Gpu clock : 0 , average gpu clock : unknown , memory clock :0 , memory average : unknown , temperature : top secret position 1 , gpu score 1500 points mor than...

and @MisterFerro In fact only the minimum value is important to set, and it raises the voltage curve at load, without it from the factory 1150mV after applying the voltage curve, the card under load gets max 1089-1093mV, changing the TDV value causes that after setting for example 1225mV card...

guys something is wrong with this mod TDV in your computers In my case, during the normal use of the computer card with the modem drops the voltage to normal values, when I start 3dmark and enter the menu, the voltage jumps, sometimes reaching the maximum value, when I run a proper test only...

When I get back from work I will do these tests but on 10850k because I don't have 9900kf anymore, I just don't know why they are in this topic? Regarding time spy I still say that it's all about RAM access time, that's why on intel people have high scores with lower gpu and mem clocks than on...

Work on the RAM a bit more, coffe lake-s runs the memories nicely twr is high try 12-16 , trfc - 300 and lower , twtr_l & s set auto , because this is regulate by tWRRD , between tWRRD__sg and _dg so big difference ? i think should be no more than 6 , try 32/28 31/27 30/26 29/25,24 or 23 ...

i dont know , i see on my card than between 1075 vs 950 is like 100 gpu points one more thing with ft2 i can set 2150 on mmory , when i put this value like 1075 , but this is worst score than ft1/2150/950 and ft2/2150/1033 is this same like ft1/2150/950 with ft2 i cant set this lower than 1033...

@ ApolloX play with the value marked on the screen , lowering it in my case increases the card's memory performance, but may lower the achieved clock rates, while increasing it allows for more overclocking, but with a loss of performance - I have the impression that this value moves the...

I look forward to the fight both in TS and TSE, healthy competition never hurt anyone, and in the card You still have potential while I'm already on the edge, I admit that I have no ideas what to do next ... A long time ago when I still hadn't figured out the voltage lock I wrote You that You...

waiting for reaction :giggle: