Suchergebnisse

I also have a 0.3mm Z-axis height chemical vapor deposition diamond heatsink that I haven't tried. I paid a company in China to manufacture it. Even though the Z-axis thermal conductivity is supposed to be very high (1400 W/mK) it still adds Z-axis height for the heat to move through to get to...

I lapped my die only a little with 2000 grit, wetted with water. I only took off the top layer in an area about 1 cm square, but in an odd shape due to uneven surface. The uncovered area looks similar to a silhouette in a Rorschach test. I forgot to take photo after the mild lapping. This...

I'm going to use this for Intel RMA. :ROFLMAO: Just kidding. I'm being nice to my KS (so far).

Even my p126 14900KS won't stay within the 253W at stock clocks @ 8400 MT/s. It needs 260W for 57/44/45 @ 8400 MT/s. On supercool direct die. 1715646519 I've been very frustrated with the Apex Encore. Won't allow tight tCL to run stable in y-cruncher. IE 8400C34 or 8600C36, no matter what VDD I...

Ich habe den MSI BIOS nicht benutzen. In den BIOS es sollte geben.

You can use a negative cache SVID offset to attempt to keep the higher Ring frequency when Vdroop occurs. I have not had much success with this, though. Around -.030V should move the curve about 100MHz.

That's awesome! After stabilizing 8267C34, I too had some fun with the 3dmark 1080p benches. On 13700KF/3090ti it was like taking candy from a baby since nobody else pushed their RAM OC as much. Time Spy Extreme Time Spy Speed Way Port Royal Fire Strike Fire Strike Extreme Fire Strike Ultra...

I certainly didn't do a 6 hour y-c run, just 1 hour + 50 cycles of TM5. I never got Karhu to go past 17,000% either, but I stopped tinkering as I had 8267C34 for daily. I did it by running really weak RTTs. Something like 80-240-240-60-48. On EVGA Z790 Dark.

Only 1.40V VDD for medium bin kits is necessary for 8000C36. I did it on T-create expert 2x24GB 7200C34 kit. Perhaps 20mV more for A-die.

Genialer Verteiler!

WTRS 8 shows 12 in ATC. ATC adds 4 to WTRL/S.

ATC addiert immer 4 zu WTR's. tCKE und tCPDED muessen mindestens 5 ns sein; tXP mindestens 7.5 ns. Sie haengen von der Frequenz ab. 5/(2000/6800) ≈ 17 7.5/(2000/6800) ≈ 26

tRAS ist zu hoch. Muesstest du 61, 65, 69 probieren. 1709144634 WTRL=2xRRDL schauet schoen! Um 6800 RFC/RFCpb sollten niedriger tun. Von 480/390, 512/416 kannst du waehlen. @ 6800 tCKE 17, tCPDED 17, tXP 26.

WRWRsg<RDRDsg is against timing rules but is often abused within the community. I haven't ever lost stability or performance from doing it. Something to play with once one is "stable."

The Y-cruncher bitrate is great. Good power. You are very close! EDIT: I type "powering" and the forum changes the word to "power."

My ring is running at 5000MHz under load even with 5900MHz on Pcores and 5100MHz at idle (6.0GHz Pcores at idle). I'm having a difficult time getting the Cache/Ring SVID Offset to work. I want it to idle at 5200MHz and run at 5100MHz when Pcores are at 5900MHz. Sometimes cores downclock to...

My 14900KF which I've referred to as a "dud" that can't stabilize 8400 even on Gskill 8400 sticks and never does more than ~1.05 x 10^10 VST/1.1x10^10VT3 all of a sudden does near full bitrate with Y-Cruncher limited to 32GB on my 2x24GB kit. 1.22 x 10^10 VST, 1.41 x 10^10 VT3. Wattage is...

I've been running RRDL @ 10 on H24M up to and including 8400 although I can't stabilize 8400. 12 does not add additional stability at 8400 versus 10 and 10 is stable at 8267. It doesn't make that great a difference versus 12 or even 8. Same bank group operations are not happening as often as...

Maybe. It could also be the same with direct die like it is for me.

Es tut mir leid. Mein Deutch ist nicht stark. Hintsichlich die timings: RFC2/RFCpb sollten auf den Ratio 32:26 sein ( von 480/390, 512/416, 544/442, 576/468, 608/494, 640/520 kannst du waehlen, am niedrigsten dass funktioniert) Deinen tWTR und tWRRD koennen abgesenkt sein. Bis WTRL 24 und...