Hi ASUS Team,
wie ist es möglich, dass mir mit einem B650 Creator lspci 16-8-4 PCIe Lanes anzeigt, obwohl es eigentlich nur 8-8-4 sein sollten?
Aktuell sind im System eine 6800XT und zwei Mellanox CX-3, die NVMEs in den M2 Slots wegelassen.
----------------
[manja-02 ~]# lspci -vv | grep -i -A 60 Radeon
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] (rev c1) (prog-if 00 [VGA controller])
Subsystem: Sapphire Technology Limited NITRO+ Radeon RX 6800 XT
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
IOMMU group: 16
Region 0: Memory at fce0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fcf0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at f000 [disabled]
Region 5: Memory at fbc00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fbd00000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [64] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 16GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 16GT/s, Width x16
----------------
[manja-02 ~]# lspci -vv | grep -i -A 60 Mellanox
05:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3]
Subsystem: Hewlett-Packard Company InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 131
IOMMU group: 21
Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at f8000000 (64-bit, prefetchable) [size=32M]
Expansion ROM at fa000000 [disabled] [size=1M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Product Name: HP ConnectX-3 QSFP
Read-only fields:
[PN] Part number: 649281-B21
[EC] Engineering changes: A5
[SN] Serial number: IL242902TG
[V0] Vendor specific: HP 2P 4X FDR VPI/2P 40GbE CX-3 HCA
[RV] Reserved: checksum good, 0 byte(s) reserved
Read/write fields:
[V1] Vendor specific: N/A
[YA] Asset tag: N/A
[RW] Read-write area: 107 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 252 byte(s) free
End
Capabilities: [9c] MSI-X: Enable+ Count=128 Masked-
Vector table: BAR=0 offset=0007c000
PBA: BAR=0 offset=0007d000
Capabilities: [60] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 116W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 512 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
LnkCap: Port #8, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8
------------
08:00.0 Ethernet controller: Mellanox Technologies MT27520 Family [ConnectX-3 Pro]
Subsystem: Mellanox Technologies Mellanox Technologies ConnectX-3 Pro Stand-up dual-port 40GbE MCX314A-BCCT
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
IOMMU group: 23
Region 0: Memory at fb100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at fa800000 (64-bit, prefetchable) [size=8M]
Expansion ROM at fb000000 [disabled] [size=1M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Product Name: CX314A - ConnectX-3 Pro QSFP
Read-only fields:
[PN] Part number: MCX314A-BCCT
[EC] Engineering changes: A6
[SN] Serial number: MT1528K01653
[V0] Vendor specific: PCIe Gen3 x8
[RV] Reserved: checksum good, 0 byte(s) reserved
Read/write fields:
[V1] Vendor specific: N/A
[YA] Asset tag: N/A
[RW] Read-write area: 101 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 252 byte(s) free
End
Capabilities: [9c] MSI-X: Enable+ Count=128 Masked-
Vector table: BAR=0 offset=0007c000
PBA: BAR=0 offset=0007d000
Capabilities: [60] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
pcilib: sysfs_read_vpd: read failed: No such device
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 116W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #8, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x4 (downgraded)
wie ist es möglich, dass mir mit einem B650 Creator lspci 16-8-4 PCIe Lanes anzeigt, obwohl es eigentlich nur 8-8-4 sein sollten?
Aktuell sind im System eine 6800XT und zwei Mellanox CX-3, die NVMEs in den M2 Slots wegelassen.
----------------
[manja-02 ~]# lspci -vv | grep -i -A 60 Radeon
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] (rev c1) (prog-if 00 [VGA controller])
Subsystem: Sapphire Technology Limited NITRO+ Radeon RX 6800 XT
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
IOMMU group: 16
Region 0: Memory at fce0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fcf0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at f000 [disabled]
Region 5: Memory at fbc00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at fbd00000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [64] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 16GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 16GT/s, Width x16
----------------
[manja-02 ~]# lspci -vv | grep -i -A 60 Mellanox
05:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3]
Subsystem: Hewlett-Packard Company InfiniBand FDR/EN 10/40Gb Dual Port 544QSFP Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 131
IOMMU group: 21
Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at f8000000 (64-bit, prefetchable) [size=32M]
Expansion ROM at fa000000 [disabled] [size=1M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Product Name: HP ConnectX-3 QSFP
Read-only fields:
[PN] Part number: 649281-B21
[EC] Engineering changes: A5
[SN] Serial number: IL242902TG
[V0] Vendor specific: HP 2P 4X FDR VPI/2P 40GbE CX-3 HCA
[RV] Reserved: checksum good, 0 byte(s) reserved
Read/write fields:
[V1] Vendor specific: N/A
[YA] Asset tag: N/A
[RW] Read-write area: 107 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 252 byte(s) free
End
Capabilities: [9c] MSI-X: Enable+ Count=128 Masked-
Vector table: BAR=0 offset=0007c000
PBA: BAR=0 offset=0007d000
Capabilities: [60] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 116W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
MaxPayload 512 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
LnkCap: Port #8, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x8
------------
08:00.0 Ethernet controller: Mellanox Technologies MT27520 Family [ConnectX-3 Pro]
Subsystem: Mellanox Technologies Mellanox Technologies ConnectX-3 Pro Stand-up dual-port 40GbE MCX314A-BCCT
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
IOMMU group: 23
Region 0: Memory at fb100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at fa800000 (64-bit, prefetchable) [size=8M]
Expansion ROM at fb000000 [disabled] [size=1M]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Product Name: CX314A - ConnectX-3 Pro QSFP
Read-only fields:
[PN] Part number: MCX314A-BCCT
[EC] Engineering changes: A6
[SN] Serial number: MT1528K01653
[V0] Vendor specific: PCIe Gen3 x8
[RV] Reserved: checksum good, 0 byte(s) reserved
Read/write fields:
[V1] Vendor specific: N/A
[YA] Asset tag: N/A
[RW] Read-write area: 101 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 253 byte(s) free
[RW] Read-write area: 252 byte(s) free
End
Capabilities: [9c] MSI-X: Enable+ Count=128 Masked-
Vector table: BAR=0 offset=0007c000
PBA: BAR=0 offset=0007d000
Capabilities: [60] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited
pcilib: sysfs_read_vpd: read failed: No such device
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 116W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
LnkCap: Port #8, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency L0s unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s, Width x4 (downgraded)
