; This file contains eeectl settings.
;
; Please note that the default settings are adjusted, sane and sufficient for most users.
; When making changes you should clearly understand what you are doing, otherwise you may
; damage both software and hardware.
;
;
; eeectl has a modular structure, each module has a set of resources.
; Most notable
;
; Modules:
; Core -- eeectl core interface.
; Speed -- FSB speed, PCIE speed and CPU voltage control.
; Temp -- Temperature monitor.
; Fan -- Fan control.
; Backlight -- Backlight brightness control.
;
; Methods:
; Core._quit -- Exit app.
; Core.Alpha -- Load ini file "Alpha".
; Speed._up -- Switch to the nearest upper speed profile.
; Speed._down -- Switcn to the nearest lower speed profile.
; Speed.Alpha -- Switch to the "Alpha" speed profile.
; Fan._native -- Return fan control to the embedded controller.
; Fan._auto -- Enable automatic mode.
; Fan.Numeric -- Set fan speed to "Numeric".
; Backlight._up -- Switch to the nearest upper backlight profile.
; Backlight._down -- Switch to the nearest lower backlight profile.
; Backlight.Alpha -- Switch to the "Alpha" backlight profile.
;
; Icons:
; Core. -- Blank icon
; Speed.FSB -- FSB clock frequency multiplied by Speed.FSBIconMul
; Speed.PCI -- PCI clock frequency
; Fan. -- Current fan speed
; Temp.C -- CPU temperature in celsius
; Temp.F -- CPU temperature in fahrenheit
; Backlight. -- Current backlight brightness intensity.
;
[Settings]
;
; List of modules allowed to save their state.
Core.Save = Fan; Speed;
;
; List of modules to add to system menu.
; List consists of blocks "Name,Mode".
; See the table above for the list of available modules.
; Mode can be embed(module menu items add right to the menu) or popup(module has its own submenu), default is embed.
Core.Menu = Speed,embed; Fan,popup; Backlight,popup; Core;
;
; Hotkeys list
; List consists of blocks "Modifier+Key,Method"
; Modifier can be any combination of a(lt), c(ontrol), s(hift) and w(indows)
; Key can be key name (like "home", "del", "g" or "8") or key code (for example "%1B" for the escape key)
; See the table above for the list of the most useful methods.
Core.Keys = aw+esc,Core._quit; aw+down,Speed._down; aw+up,Speed._up; aw+f3,Backlight._down; aw+f4,Backlight._up; aw+0,Fan._auto; aw+3,Fan.30; aw+5,Fan.50; aw+7,Fan.70;
;
; List of icons to show in the tray.
; List consists of blocks "icon,color".
; See the table above for the list of available icons.
; Color is 24-bit hex value in BGR format, FFFF00 by default.
Core.Icon = Speed.FSB; Temp.C,00FFFF;
;
; Pause between icon changes, msec.
; Set to 0 to disable automatic icon changing.
Core.IconDelay = 0
;
; Speed profiles list.
; List consists of blocks "FSB,PCIE,Voltage,Name".
; FSB is the real FSB frequency (70MHz stock, 100MHz max), not the rated one which is
; this value multiplied by four, or the CPU one, which is this value multiplied by nine.
; PCIE is PCI Express bus clock frequency.
; Voltage is CPU voltage flag, 0 for Low, 1 for Normal.
; This flag is ignored for all(and even named) intermediate values.
; Name is just what to show in the menu("Suspend" is the special profile to set before entering sleep mode).
; You may omit Name in case you want to hide profile from the menu, however it will still be used as an
; intermediate value.
;
; Note that changing the frequency includes a step-by-step transfer through all intermediate
; values, i.e. if you change the frequency from 70 to 100 MHz and settings contain also 80
; and 95MHz, first the frequency will be changed to 80, then to 95 and only then to 100MHz.
; When comparing, FSB speeds are taken in account first and if they are equal -- PCIE speeds get comapared too.
;
Speed.Profiles = 70,99,0,Suspend; 70,100,0,Stock; 75,100; 80,100; 85,100; 90,100; 95,100; 100,100,1,Full; 101,100; 102,101; 103,101; 104,102; 105,102; 106,103; 107,103; 108,104; 109,104; 110,105,1,Max;
; Pause between steps in described process, msec.
Speed.StepDelay = 200
; Multiplier for the FSB icon. You may set it to 9 to see the CPU speed in the tray instead of the FSB one.
Speed.FSBIconMul = 9
;
; Fan profiles list.
; List consists of blocks "Speed,C_Temp_On,C_Temp_Off".
; Speed is the fan speed (0-100).
; C_Temp_On(used in Automatic mode) is temperature(Celsius) when this profile should be activated.
; C_Temp_Off(used in Automatic mode) is temperature(Celsius) when this profile should be deactivated.
; You may set both temp fileds to 0(or just omit them) if you don't want them to be used in Automatic mode.
Fan.Profiles = 0,40,2; 10,45,40; 20,50,45; 30,55,50; 40,60,55; 50,65,60; 60,70,65; 70,75,70; 80,80,75; 90,85,80; 100,90,85;
;
; Backlight profiles list.
; List consists of blocks "Name,Value".
; Name is just what to show in the menu.
; Value is the backlight brightness intensity(0-100).
Backlight.Profiles = Max,100;
[States]
Fan.Mode=1
Fan.Speed=
Speed.Profile=Stock
aber andere schon^^ laptop vom bruder is aber connectet... is mir ein rätsel 
mal weitersuchen..
bei dir funzt ja alles oder?