[Problem] DHCP Client keine IP -> MikroTik RouterBOARD 750Gr3 an Glasfaser

W

WaldemarBeck

Enthusiast
Thread Starter
Mitglied seit
30.10.2009
Beiträge
1.574
Tag Liebe Gemeinde,

habe mir, aufgrund einiger Empfehlungen in diversen Treads, einen MikroTik RouterBOARD 750Gr3 zugelegt.
Habe mir mit dem Teil schon einige Nächte um die Ohren geschlagen, bekomme den Router aber einfach nicht hinter meinem Telekom Glasfasermodem zum laufen bzw der Verbindungsaufbau scheitert ständig.
Diverse Anleitunge habe ich dafür schon genutzt aber nie etwas spezielles für das RouterOS mit Telekom Glasfaser gefunden.

Die Telekom PPPoE Zugangsdaten habe ich so eingetragen:
Anschlusskennung (12-stellig) + Zugangsnummer (12-stellig) + die Mitbenutzernummer 0001.
0001234567890611234567890001@t-online.de

Danke schonmal
 
Zuletzt bearbeitet:
Wenn Du diese Anzeige nicht sehen willst, registriere Dich und/oder logge Dich ein.
Eine Fehlermeldung wäre hilfreich :wink:
 
Naja der Router Versucht sich einzuwählen und scheitert daran jedesmal mit Disconnect. Das Problem wird aber wohl eher sein das ich diverse Anleitungen nutze die alle nicht für Glasfaser ausgelegt sind
Mit VLAN ID 7 habe ich es auch schon Probiert was laut Anleitung bei VDSL notwendig ist.

Habe als Beispiel folgende Anleitung genutzt:

Erstinbetriebnahme eines Mikrotik-Routers [Teil3] Der Deutsche Mikrotik-Blog

und nachdem es dann nicht ging auch mal VLAN ID 7 getestet, aber jedesmal Abbruch beim Verbindungsaufbau. Meine Fritzbox 7390 läuft hingegen Problemlos an meinem Glasfasermodem.

P.S: Den Log kann ich heute Abend dann posten wenn ich es nochmal versuche. Evtl. hat ja jemand eine auf meine Konstellation ausgelegte Anleitung für mich.
 
Zuletzt bearbeitet:
Ohne Log wird das leider nur ein rumgerate... Dann poste lieber heute Abend das Log damit man sieht wo die Einwahl scheitert.
 
Und poste nicht nur das log, sondern auch gleich die Ausgabe von /export oder zumindest von /interfaces export (ggf. Zugangsdaten verbergen).
Du hängst per Ethernet am Glasfasermodem/der Glasfaserbridge/ONT oder?
 
Zuletzt bearbeitet:
@martingo
jop direkt per Ethernet am Telekom Glasfasermodem
Log & export werde ich dann direkt posten wenn ich zum neu Einrichten komme

@Opticum
Aktuell ist die 6.42.3 Current drauf, mit der 6.43rc19 (Release candidate) ging WinBox leider nicht mehr.
Danke für den Link schau es mir gleich mal an.
 
So Verbindung konnte jetzt mal aufgebaut werden das Internet am PC geht immer noch nicht :-(

Verbindung konnte erst nach änderung der MPU von 1500 auf 1492 aufgebaut werden.

Hier mal die Log und export:

Code: 
  MikroTik RouterOS 6.42.3 (c) 1999-2018       [url="http://www.mikrotik.com/"]MikroTik Routers and Wireless[/url]

[?]             Gives the list of available commands
command [?]     Gives help on the command and list of arguments

[Tab]           Completes the command/word. If the input is ambiguous,
                a second [Tab] gives possible options

/               Move up to base level
..              Move up one level
/command        Use command at the base level
[admin@MikroTik] > /log
[admin@MikroTik] /log> print
11:03:36 system,info router rebooted 
11:03:37 pppoe,ppp,info pppoe-out1: initializing... 
11:03:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
11:03:38 interface,info vlan7 link up 
11:03:38 pppoe,ppp,info pppoe-out1: terminating... 
11:03:38 pppoe,ppp,info pppoe-out1: disconnected 
11:03:38 pppoe,ppp,info pppoe-out1: initializing... 
11:03:38 pppoe,ppp,info pppoe-out1: waiting for packets... 
11:03:38 bridge,info "bridge1" mac address changed to CC:2D:E0:69:57:44 
11:03:38 pppoe,ppp,info pppoe-out1: terminating... 
11:03:38 pppoe,ppp,info pppoe-out1: disconnected 
11:03:38 pppoe,ppp,info pppoe-out1: initializing... 
11:03:38 pppoe,ppp,info pppoe-out1: waiting for packets... 
11:03:38 pppoe,ppp,info pppoe-out1: terminating... 
11:03:38 pppoe,ppp,info pppoe-out1: disconnected 
11:03:38 pppoe,ppp,info pppoe-out1: initializing... 
11:03:38 pppoe,ppp,info pppoe-out1: waiting for packets... 
11:03:38 pppoe,ppp,info pppoe-out1: terminating... 
11:03:38 pppoe,ppp,info pppoe-out1: disconnected 
11:03:38 pppoe,ppp,info pppoe-out1: initializing... 
11:03:38 pppoe,ppp,info pppoe-out1: waiting for packets... 
11:03:38 pppoe,ppp,info pppoe-out1: terminating... 
11:03:38 pppoe,ppp,info pppoe-out1: disconnected 
11:03:38 pppoe,ppp,info pppoe-out1: initializing... 
11:03:38 pppoe,ppp,info pppoe-out1: waiting for packets... 
11:03:38 pppoe,ppp,info pppoe-out1: terminating... 
11:03:38 pppoe,ppp,info pppoe-out1: disconnected 
11:03:38 pppoe,ppp,info pppoe-out1: initializing... 
11:03:38 pppoe,ppp,info pppoe-out1: waiting for packets... 
11:03:41 interface,info ether1 link up (speed 1G, full duplex) 
11:03:42 interface,info ether2 link up (speed 1G, full duplex) 
11:03:45 pppoe,ppp,info pppoe-out1: connecting... 
11:03:46 pppoe,ppp,info pppoe-out1: authenticated 
11:03:47 pppoe,ppp,info pppoe-out1: connected 
11:03:49 system,info,account user admin logged in from B0:6E:BF:C1:20:55 via winbo
x 
11:04:06 system,info,account user admin logged in via local 

[admin@MikroTik] /log> /export
# may/28/2018 11:04:24 by RouterOS 6.42.3
# software id = 4WQE-PXVI
#
# model = RouterBOARD 750G r3
# serial number = 8AFF0XXXXX
/interface bridge
add fast-forward=no name=bridge1
/interface ethernet
set [ find default-name=ether1 ] mtu=1492
/interface vlan
add interface=ether1 name=vlan7 vlan-id=7
/interface pppoe-client
add add-default-route=yes dial-on-demand=yes disabled=no interface=vlan7 name=\
    pppoe-out1 password=12345678 use-peer-dns=yes user=\
    [email]xxxxxxxxxxxxbbbbbbbbbbbb0001@t-online.de[/email]
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp_pool1 ranges=192.168.123.10-192.168.123.249
/ip dhcp-server
add address-pool=dhcp_pool1 disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
/ip address
add address=192.168.123.1/24 interface=bridge1 network=192.168.123.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.123.0/24 gateway=192.168.123.1
/ip dns
set allow-remote-requests=yes
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
/system routerboard settings
set silent-boot=no
[admin@MikroTik] /log>
 
Zuletzt bearbeitet:
Die src-nat Regel (vorletzte Regel Deines Exports) musst du von ether1 auf pppoe-out1 umstellen.
Und den DHCP Client auf ether1 würde ich entfernen.
 
Super danke jetzt geht es.
Jetzt muss ich nur meinen dyndns Eintragen und ports freigeben
 
/interface ethernet
set [ find default-name=ether1 ] mtu=1492
Zum Vergrößern anklicken....
Rausnehmen. Der PPPoE Client stellt selbst die richtige MTU ein. Damit wird die mögliche MTU kleiner.
add bridge=bridge1 interface=etherx
Zum Vergrößern anklicken....
sollte mit hw=yes ergänzt werden.

Und bevor du das Teil auf das Internet loslässt solltes du dringend über Firerwallregeln nachdenken. Neben /ip firewall input auch über /ip services .
 
danke, wie kann ich solche Änderungen Manuel in der Config vornehmen? Habe bis jetzt alles über die RouterOS Winbox gemacht.
 
Wenn ich das

/interface ethernet
set [ find default-name=ether1 ] mtu=1492

deaktiviere kann keine Internetverbindung mehr hergestellt werden.

Hardware Offload habe ich bei Port 2-5 aktiviert, es steht bei der Export nur "add bridge=bridge1 hw=no interface=ether2" dabei wenn ich es deaktiviere, hw=yes steht da nicht dabei wenn ich es aktiviere

Beim DHCP Client bekomme ich irgendwie auch keine IP, es steht immer nur beim Status Searching.

Hier mal noch die aktuelle export und log:

Code: 
  MikroTik RouterOS 6.42.3 (c) 1999-2018       [url="http://www.mikrotik.com/"]MikroTik Routers and Wireless[/url]

[?]             Gives the list of available commands
command [?]     Gives help on the command and list of arguments

[Tab]           Completes the command/word. If the input is ambiguous,
                a second [Tab] gives possible options

/               Move up to base level
..              Move up one level
/command        Use command at the base level
[admin@MikroTik] > /log
[admin@MikroTik] /log> print
13:21:35 system,info router rebooted 
13:21:36 pppoe,ppp,info pppoe-out1: initializing... 
13:21:36 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 interface,info vlan7 link up 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 bridge,info "bridge1" mac address changed to CC:XX:D0:XX:57:XX 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:40 interface,info ether1-WAN link up (speed 1G, full duplex) 
13:21:41 interface,info ether2 link up (speed 1G, full duplex) 
13:21:49 pppoe,ppp,info pppoe-out1: connecting... 
13:21:51 pppoe,ppp,info pppoe-out1: authenticated 
13:21:51 pppoe,ppp,info pppoe-out1: connected 
13:21:52 system,info,account user admin logged in from VV:BB:BF:CX:30:XX via winbo
x 
13:21:52 system,info,account user admin logged in via local 
13:21:52 system,info,account user admin logged in via local 
13:21:52 system,info,account user admin logged in via local 
13:21:52 system,info,account user admin logged in via local 

[admin@MikroTik] /log> /export
# may/29/2018 13:22:08 by RouterOS 6.42.3
# software id = 4WQE-XXXX
#
# model = RouterBOARD 750G r3
# serial number = 8AFXXXXXXXXX
/interface bridge
add fast-forward=no name=bridge1
/interface ethernet
set [ find default-name=ether1 ] mtu=1492 name=ether1-WAN
/interface vlan
add interface=ether1-WAN name=vlan7 vlan-id=7
/interface pppoe-client
add add-default-route=yes dial-on-demand=yes disabled=no interface=vlan7 name=\
    pppoe-out1 password=XXXXXXXX use-peer-dns=yes user=\
    [email]YYYYYYYYYYYYXXXXXXXXXXXX0001@t-online.de[/email]
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp_pool1 ranges=192.168.123.10-192.168.123.249
/ip dhcp-server
add address-pool=dhcp_pool1 disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
/ip address
add address=192.168.123.1/24 interface=bridge1 network=192.168.123.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1-WAN
/ip dhcp-server network
add address=192.168.123.0/24 gateway=192.168.123.1
/ip dns
set allow-remote-requests=yes
/ip firewall filter
add action=accept chain=input connection-nat-state="" connection-state=\
    established connection-type=""
add action=accept chain=input connection-nat-state="" connection-state=related \
    connection-type=""
add action=accept chain=input connection-nat-state="" connection-state="" \
    connection-type="" in-interface=bridge1
add action=log chain=input connection-nat-state="" connection-state="" \
    connection-type="" disabled=yes
add action=drop chain=input connection-nat-state="" connection-state="" \
    connection-type=""
add action=accept chain=forward connection-state=established
add action=accept chain=forward connection-state=related
add action=accept chain=forward comment=Internet connection-state="" \
    dst-address=!192.168.123.0/24 dst-port=80,443 in-interface=bridge1 \
    protocol=tcp
add action=drop chain=forward
/ip firewall nat
add action=masquerade chain=srcnat out-interface=pppoe-out1
/system clock
set time-zone-name=Europe/Berlin
/system routerboard settings
set silent-boot=no
/system scheduler
add interval=10m name=Dyndns on-event=dyndns policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \
    start-date=may/29/2018 start-time=12:48:12
/system script
add name=dyndns owner=admin policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":gl\
    obal ddnsuser "DynDNS1"\r\
    \n:global ddnspass "DynDNS1DynDNS1x"\r\
    \n:global theinterface "ether 1"\r\
    \n:global ddnshost DynDNS1.dyndns.com\r\
    \n:global ipddns [:resolve \$ddnshost];\r\
    \n:global ipfresh [ /ip address get [/ip address find interface=\$theinterfa\
    ce ] address ]\r\
    \n:if ([ :typeof \$ipfresh ] = nil ) do={\r\
    \n   :log info ("DynDNS: No ip address on \$theinterface .")\r\
    \n} else={\r\
    \n   :for i from=( [:len \$ipfresh] - 1) to=0 do={ \r\
    \n      :if ( [:pick \$ipfresh \$i] = "/") do={ \r\
    \n    :set ipfresh [:pick \$ipfresh 0 \$i];\r\
    \n      } \r\
    \n}\r\
    \n \r\
    \n:if (\$ipddns != \$ipfresh) do={\r\
    \n    :log info ("DynDNS: IP-DynDNS = \$ipddns")\r\
    \n    :log info ("DynDNS: IP-Fresh = \$ipfresh")\r\
    \n   :log info "DynDNS: Update IP needed, Sending UPDATE...!"\r\
    \n   :global str "/nic/update\\\?hostname=\$ddnshost&myip=\$ipfresh&wildcar\
    d=NOCHG&mx=NOCHG&backmx=NOCHG"\r\
    \n   /tool fetch address=members.dyndns.org src-path=\$str mode=http user=\$\
    ddnsuser \\\r\
    \n         password=\$ddnspass dst-path=("/DynDNS.".\$ddnshost)\r\
    \n    :delay 1\r\
    \n    :global str [/file find name="DynDNS.\$ddnshost"];\r\
    \n    /file remove \$str\r\
    \n    :global ipddns \$ipfresh\r\
    \n  :log info "DynDNS: IP updated to \$ipfresh!"\r\
    \n    } else={\r\
    \n     :log info "DynDNS: dont need changes";\r\
    \n    }\r\
    \n} "
[admin@MikroTik] /log>
 
Zuletzt bearbeitet:
Das Level7 Log (Debug) der PPPoE Verbindung wäre gut, dann sieht man was genau während des Wahlvorgangs passiert und wo genau die Einwahl scheitert.
 
Du sollst ja nicht das Interface deaktivieren, sondern dem Interface die Standard MTU von 1500 geben. Wenn das Interface deaktiviert ist kann natürlich der PPPoE Client auf diesem Interface nicht mehr funktionieren.
 
MTU 1500 geht jetzt plötzlich braucht nur Länger zum einwählen.

- - - Updated - - -

Hoffe das hilft mehr:

Code: 
[?]             Gives the list of available commands
command [?]     Gives help on the command and list of arguments

[Tab]           Completes the command/word. If the input is ambiguous,
                a second [Tab] gives possible options

/               Move up to base level
..              Move up one level
/command        Use command at the base level
[admin@MikroTik] > /log
[admin@MikroTik] /log> print
14:52:13 system,info router rebooted 
14:52:15 pppoe,ppp,info pppoe-out1: initializing... 
14:52:15 pppoe,ppp,debug pppoe-out1: IPCP demandUp 
14:52:15 pppoe,ppp,debug pppoe-out1: IPV6CP demandUp 
14:52:15 pppoe,ppp,debug pppoe-out1: MPLSCP demandUp 
14:52:15 pppoe,ppp,info pppoe-out1: waiting for packets... 
14:52:15 pppoe,ppp,debug pppoe-out1: CCP close 
14:52:15 pppoe,ppp,debug pppoe-out1: BCP close 
14:52:15 pppoe,ppp,debug pppoe-out1: IPCP close 
14:52:15 pppoe,ppp,debug pppoe-out1: IPV6CP close 
14:52:15 pppoe,ppp,debug pppoe-out1: MPLSCP close 
14:52:15 pppoe,ppp,info pppoe-out1: terminating... 
14:52:15 pppoe,ppp,debug pppoe-out1: LCP lowerdown 
14:52:15 pppoe,ppp,debug pppoe-out1: LCP down event in initial state 
14:52:15 pppoe,ppp,info pppoe-out1: disconnected 
14:52:15 pppoe,ppp,info pppoe-out1: initializing... 
14:52:15 pppoe,ppp,debug pppoe-out1: IPCP demandUp 
14:52:15 pppoe,ppp,debug pppoe-out1: IPV6CP demandUp 
14:52:15 pppoe,ppp,debug pppoe-out1: MPLSCP demandUp 
14:52:15 pppoe,ppp,info pppoe-out1: waiting for packets... 
14:52:16 interface,info vlan7 link up 
14:52:16 pppoe,ppp,debug pppoe-out1: CCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: BCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP close 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP close 
14:52:16 bridge,info "bridge1" mac address changed to CA:2B:E5:45:82:41
14:52:16 pppoe,ppp,info pppoe-out1: terminating... 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP lowerdown 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP down event in initial state 
14:52:16 pppoe,ppp,info pppoe-out1: disconnected 
14:52:16 pppoe,ppp,info pppoe-out1: initializing... 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP demandUp 
14:52:16 pppoe,ppp,info pppoe-out1: waiting for packets... 
14:52:16 pppoe,ppp,debug pppoe-out1: CCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: BCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP close 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP close 
14:52:16 pppoe,ppp,info pppoe-out1: terminating... 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP lowerdown 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP down event in initial state 
14:52:16 pppoe,ppp,info pppoe-out1: disconnected 
14:52:16 pppoe,ppp,info pppoe-out1: initializing... 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP demandUp 
14:52:16 pppoe,ppp,info pppoe-out1: waiting for packets... 
14:52:16 pppoe,ppp,debug pppoe-out1: CCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: BCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP close 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP close 
14:52:16 pppoe,ppp,info pppoe-out1: terminating... 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP lowerdown 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP down event in initial state 
14:52:16 pppoe,ppp,info pppoe-out1: disconnected 
14:52:16 pppoe,ppp,info pppoe-out1: initializing... 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP demandUp 
14:52:16 pppoe,ppp,info pppoe-out1: waiting for packets... 
14:52:16 pppoe,ppp,debug pppoe-out1: CCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: BCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP close 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP close 
14:52:16 pppoe,ppp,info pppoe-out1: terminating... 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP lowerdown 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP down event in initial state 
14:52:16 pppoe,ppp,info pppoe-out1: disconnected 
14:52:16 pppoe,ppp,info pppoe-out1: initializing... 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP demandUp 
14:52:16 pppoe,ppp,info pppoe-out1: waiting for packets... 
14:52:16 pppoe,ppp,debug pppoe-out1: CCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: BCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP close 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP close 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP close 
14:52:16 pppoe,ppp,info pppoe-out1: terminating... 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP lowerdown 
14:52:16 pppoe,ppp,debug pppoe-out1: LCP down event in initial state 
14:52:16 pppoe,ppp,info pppoe-out1: disconnected 
14:52:16 pppoe,ppp,info pppoe-out1: initializing... 
14:52:16 pppoe,ppp,debug pppoe-out1: IPCP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: IPV6CP demandUp 
14:52:16 pppoe,ppp,debug pppoe-out1: MPLSCP demandUp 
14:52:16 pppoe,ppp,info pppoe-out1: waiting for packets... 
14:52:19 interface,info ether1-WAN link up (speed 1G, full duplex) 
14:52:20 interface,info ether2 link up (speed 1G, full duplex) 
14:52:23 pppoe,ppp,info pppoe-out1: connecting... 
14:52:23 pppoe,debug,packet vlan7: sent PADI to FF:FF:FF:FF:FF:FF 
14:52:23 pppoe,debug,packet     session-id=0x0000 
14:52:23 pppoe,debug,packet     host-uniq=0x100af00 
14:52:23 pppoe,debug,packet     service-name= 
14:52:24 pppoe,debug,packet vlan7: sent PADI to FF:FF:FF:FF:FF:FF 
14:52:24 pppoe,debug,packet     session-id=0x0000 
14:52:24 pppoe,debug,packet     host-uniq=0x100af00 
14:52:24 pppoe,debug,packet     service-name= 
14:52:24 pppoe,debug,packet vlan7: rcvd PADO from 03:17:83:XX:9B:E1
14:52:24 pppoe,debug,packet     session-id=0x0000 
14:52:24 pppoe,debug,packet     ac-name=EMMJ01 
14:52:24 pppoe,debug,packet     host-uniq=0x100af00 
14:52:24 pppoe,debug,packet     service-name= 
14:52:24 pppoe,debug,packet     ac-cookie=8e 0e 91 47 36 8f 6d be 1d c5 6b 23 72 d
a cf f6 
14:52:24 pppoe,debug,packet vlan7: sent PADR to 03:17:83:XX:9B:E1
14:52:24 pppoe,debug,packet     session-id=0x0000 
14:52:24 pppoe,debug,packet     host-uniq=0x200af00 
14:52:24 pppoe,debug,packet     service-name= 
14:52:24 pppoe,debug,packet     ac-cookie=8e 0e 91 47 36 8f 6d be 1d c5 6b 23 72 d
a cf f6 
14:52:24 pppoe,debug,packet vlan7: rcvd PADS from 03:17:83:XX:9B:E1
14:52:24 pppoe,debug,packet     session-id=0x0042 
14:52:24 pppoe,debug,packet     service-name= 
14:52:24 pppoe,debug,packet     host-uniq=0x200af00 
14:52:24 pppoe,debug,packet     ac-name=EMMJ01 
14:52:24 pppoe,debug,packet     ac-cookie=8e 0e 91 47 36 8f 6d be 1d c5 6b 23 72 d
a cf f6 
14:52:24 pppoe,ppp,debug pppoe-out1: LCP lowerup 
14:52:24 pppoe,ppp,debug pppoe-out1: LCP open 
14:52:24 pppoe,ppp,debug pppoe-out1: LCP timer 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent LCP ConfReq id=0x1 
14:52:24 pppoe,ppp,debug,packet    <mru 1480> 
14:52:24 pppoe,ppp,debug,packet    <magic 0x290c4e6> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP ConfReq id=0x57 
14:52:24 pppoe,ppp,debug,packet    <mru 1492> 
14:52:24 pppoe,ppp,debug,packet    <magic 0xe001554b> 
14:52:24 pppoe,ppp,debug,packet    <auth pap> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent LCP ConfAck id=0x57 
14:52:24 pppoe,ppp,debug,packet    <mru 1492> 
14:52:24 pppoe,ppp,debug,packet    <magic 0xe001554b> 
14:52:24 pppoe,ppp,debug,packet    <auth pap> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP ConfAck id=0x1 
14:52:24 pppoe,ppp,debug,packet    <mru 1480> 
14:52:24 pppoe,ppp,debug,packet    <magic 0x290c4e6> 
14:52:24 pppoe,ppp,debug pppoe-out1: LCP opened 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent PAP AuthReq id=0x1 
14:52:24 pppoe,ppp,debug,packet     <user [email]XXXXXXXXXXXXYYYYYYYYYYY0001@tonline.de@t-online.de[/email]
> 
14:52:24 pppoe,ppp,debug,packet     <password 123456789> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: rcvd PAP AuthAck id=0x1 
14:52:24 pppoe,ppp,debug,packet     SRU=100000#SRD=200000# 
14:52:24 pppoe,ppp,info pppoe-out1: authenticated 
14:52:24 pppoe,ppp,debug pppoe-out1: IPCP lowerup 
14:52:24 pppoe,ppp,debug pppoe-out1: IPCP open 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent IPCP ConfReq id=0x1 
14:52:24 pppoe,ppp,debug,packet     <addr 0.0.0.0> 
14:52:24 pppoe,ppp,debug,packet     <ms-dns 0.0.0.0> 
14:52:24 pppoe,ppp,debug,packet     <ms-dns 0.0.0.0> 
14:52:24 pppoe,ppp,debug pppoe-out1: IPV6CP lowerup 
14:52:24 pppoe,ppp,debug pppoe-out1: IPV6CP open 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent IPV6CP ConfReq id=0x1 
14:52:24 pppoe,ppp,debug,packet     <interface-identifier 0:0:0:8> 
14:52:24 pppoe,ppp,debug pppoe-out1: MPLSCP lowerup 
14:52:24 pppoe,ppp,debug pppoe-out1: MPLSCP open 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x1 
14:52:24 pppoe,ppp,debug pppoe-out1: BCP open 
14:52:24 pppoe,ppp,debug pppoe-out1: CCP lowerup 
14:52:24 pppoe,ppp,debug pppoe-out1: CCP open 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: rcvd IPCP ConfReq id=0x85 
14:52:24 pppoe,ppp,debug,packet     <addr 62.155.245.91> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent IPCP ConfAck id=0x85 
14:52:24 pppoe,ppp,debug,packet     <addr 62.155.245.91> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: rcvd IPCP ConfNak id=0x1 
14:52:24 pppoe,ppp,debug,packet     <addr 217.94.237.32> 
14:52:24 pppoe,ppp,debug,packet     <ms-dns 217.0.43.129> 
14:52:24 pppoe,ppp,debug,packet     <ms-dns 217.0.43.145> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent IPCP ConfReq id=0x2 
14:52:24 pppoe,ppp,debug,packet     <addr 217.94.237.32> 
14:52:24 pppoe,ppp,debug,packet     <ms-dns 217.0.43.129> 
14:52:24 pppoe,ppp,debug,packet     <ms-dns 217.0.43.145> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: rcvd IPV6CP ConfReq id=0x89 
14:52:24 pppoe,ppp,debug,packet     <interface-identifier 109:109:3e9b:f55b> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: sent IPV6CP ConfAck id=0x89 
14:52:24 pppoe,ppp,debug,packet     <interface-identifier 109:109:3e9b:f55b> 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: rcvd IPV6CP ConfAck id=0x1 
14:52:24 pppoe,ppp,debug,packet     <interface-identifier 0:0:0:8> 
14:52:24 pppoe,ppp,debug pppoe-out1: IPV6CP opened 
14:52:24 pppoe,ppp,info pppoe-out1: connected 
14:52:24 pppoe,ppp,debug,packet  pppoe-out1: rcvd IPCP ConfAck id=0x2 
14:52:24 pppoe,ppp,debug,packet     <addr 217.94.237.32> 
14:52:24 pppoe,ppp,debug,packet     <ms-dns 217.0.43.129> 
14:52:24 pppoe,ppp,debug,packet     <ms-dns 217.0.43.145> 
14:52:24 pppoe,ppp,debug pppoe-out1: IPCP opened 
14:52:25 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:52:25 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x2 
14:52:27 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:52:27 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x3 
14:52:29 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:52:29 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x4 
14:52:32 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:52:32 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x5 
14:52:38 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:52:38 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x6 
14:52:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x0 
14:52:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:52:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x0 
14:52:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:52:46 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:52:46 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x7 
14:52:56 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:52:56 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x8 
14:53:06 system,info,account user admin logged in from B0:6E:BF:C1:20:55 via winbo
x 
14:53:06 system,info,account user admin logged in via local 
14:53:06 system,info,account user admin logged in via local 
14:53:06 system,info,account user admin logged in via local 
14:53:11 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x1 
14:53:11 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:53:11 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x1 
14:53:11 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:53:12 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:53:12 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0x9 
14:53:38 system,info,account user admin logged in via local 
14:53:39 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:53:39 pppoe,ppp,debug,packet  pppoe-out1: sent MPLSCP ConfReq id=0xa 
14:53:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x2 
14:53:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:53:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x2 
14:53:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:53:50 system,info,account user admin logged out via local 
14:54:11 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x3 
14:54:11 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:54:11 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x3 
14:54:11 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:54:20 pppoe,ppp,debug pppoe-out1: MPLSCP timer 
14:54:20 pppoe,ppp,debug pppoe-out1: MPLSCP timeout sending ConfReq 
14:54:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x4 
14:54:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:54:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x4 
14:54:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:55:11 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x5 
14:55:11 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:55:11 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x5 
14:55:11 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:55:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x6 
14:55:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:55:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x6 
14:55:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:56:11 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x7 
14:56:11 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:56:11 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x7 
14:56:11 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:56:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x8 
14:56:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:56:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x8 
14:56:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:57:11 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x9 
14:57:11 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:57:11 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x9 
14:57:11 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:57:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0xa 
14:57:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:57:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0xa 
14:57:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:58:11 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0xb 
14:58:11 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:58:11 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0xb 
14:58:11 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:58:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0xc 
14:58:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:58:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0xc 
14:58:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:59:11 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0xd 
14:59:11 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:59:11 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0xd 
14:59:11 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
14:59:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0xe 
14:59:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
14:59:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0xe 
14:59:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:00:11 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0xf 
15:00:11 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:00:11 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0xf 
15:00:11 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:00:41 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x10 
15:00:41 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:00:41 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x10 
15:00:41 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:01:15 system,info cloud change time May/29/2018-15:00:51 => May/29/2018-15:01:1
5 
15:01:35 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x11 
15:01:35 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:01:35 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x11 
15:01:35 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:02:05 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x12 
15:02:05 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:02:05 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x12 
15:02:05 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:02:35 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x13 
15:02:35 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:02:35 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x13 
15:02:35 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:03:01 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:03:03 system,error,critical login failure for user supervisor from 47.198.209.2
06 via telnet 
15:03:04 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:03:05 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x14 
15:03:05 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:03:05 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x14 
15:03:05 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:03:07 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:08 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:10 system,error,critical login failure for user Admin from 47.198.209.206 vi
a telnet 
15:03:12 system,error,critical login failure for user guest from 47.198.209.206 vi
a telnet 
15:03:14 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:15 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:18 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:03:19 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:03:20 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:03:23 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:24 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:26 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:28 system,error,critical login failure for user ubnt from 47.198.209.206 via
 telnet 
15:03:29 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:31 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:03:33 system,error,critical login failure for user guest from 47.198.209.206 vi
a telnet 
15:03:35 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:35 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x15 
15:03:35 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:03:35 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x15 
15:03:35 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:03:36 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:03:39 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:40 system,error,critical login failure for user tech from 47.198.209.206 via
 telnet 
15:03:42 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:44 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:45 system,error,critical login failure for user guest from 47.198.209.206 vi
a telnet 
15:03:47 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:49 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:51 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:03:52 system,error,critical login failure for user 666666 from 47.198.209.206 v
ia telnet 
15:03:55 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:56 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:03:57 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:00 system,error,critical login failure for user admin1 from 47.198.209.206 v
ia telnet 
15:04:02 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:03 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:05 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x16 
15:04:05 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:04:05 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x16 
15:04:05 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:04:06 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:04:07 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:09 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:11 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:13 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:15 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:17 system,error,critical login failure for user mother from 47.198.209.206 v
ia telnet 
15:04:18 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:20 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:22 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:04:24 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:25 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:04:28 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:29 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:30 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:33 system,error,critical login failure for user administrator from 47.198.20
9.206 via telnet 
15:04:34 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:35 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x17 
15:04:35 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:04:35 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x17 
15:04:35 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:04:36 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:38 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:04:40 system,error,critical login failure for user user from 47.198.209.206 via
 telnet 
15:04:41 system,error,critical login failure for user 888888 from 47.198.209.206 v
ia telnet 
15:04:43 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:45 system,error,critical login failure for user supervisor from 47.198.209.2
06 via telnet 
15:04:46 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:04:49 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:50 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:52 system,error,critical login failure for user Administrator from 47.198.20
9.206 via telnet 
15:04:54 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:56 system,error,critical login failure for user default from 47.198.209.206 
via telnet 
15:04:57 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:04:59 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:01 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:02 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:05 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x18 
15:05:05 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:05:05 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x18 
15:05:05 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:05:05 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:06 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:07 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:10 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:11 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:13 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:15 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:17 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:18 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:21 system,error,critical login failure for user service from 47.198.209.206 
via telnet 
15:05:22 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:23 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:26 system,error,critical login failure for user support from 47.198.209.206 
via telnet 
15:05:27 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:29 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:31 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:32 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:34 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:35 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x19 
15:05:35 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:05:35 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x19 
15:05:35 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:05:36 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:05:38 system,error,critical login failure for user admin from 47.198.209.206 vi
a telnet 
15:05:39 system,error,critical login failure for user root from 47.198.209.206 via
 telnet 
15:06:05 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x1a 
15:06:05 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:06:05 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x1a 
15:06:05 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:06:35 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x1b 
15:06:35 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:06:35 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x1b 
15:06:35 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:07:05 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x1c 
15:07:05 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:07:05 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x1c 
15:07:05 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:07:35 pppoe,ppp,debug,packet  pppoe-out1: rcvd LCP EchoReq id=0x1d 
15:07:35 pppoe,ppp,debug,packet     <magic 0xe001554b> 
15:07:35 pppoe,ppp,debug,packet  pppoe-out1: sent LCP EchoRep id=0x1d 
15:07:35 pppoe,ppp,debug,packet     <magic 0x290c4e6> 
15:07:43 system,info,account user admin logged in via local 
15:07:47 system,info,account user admin logged out via local 
15:07:47 system,info,account user admin logged in via local 

[admin@MikroTik] /log> /export
# may/29/2018 15:07:57 by RouterOS 6.42.3
# software id = VVVV-XXXX
#
# model = RouterBOARD 750G r3
# serial number = 1234567890
/interface bridge
add fast-forward=no name=bridge1
/interface ethernet
set [ find default-name=ether1 ] name=ether1-WAN
/interface vlan
add interface=ether1-WAN name=vlan7 vlan-id=7
/interface pppoe-client
add add-default-route=yes dial-on-demand=yes disabled=no interface=vlan7 name=\
    pppoe-out1 password=123456789 use-peer-dns=yes user=\
    [email]XXXXXXXXXXXXYYYYYYYYYYY0001@tonline.de@t-online.de[/email]
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp_pool1 ranges=192.168.123.10-192.168.123.249
/ip dhcp-server
add address-pool=dhcp_pool1 disabled=no interface=bridge1 name=dhcp1
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
/ip address
add address=192.168.123.1/24 interface=bridge1 network=192.168.123.0
/ip dhcp-client
add dhcp-options=hostname,clientid disabled=no interface=ether1-WAN
/ip dhcp-server network
add address=192.168.123.0/24 gateway=192.168.123.1
/ip dns
set allow-remote-requests=yes
/ip firewall filter
add action=accept chain=input connection-nat-state="" connection-state=\
    established connection-type=""
add action=accept chain=input connection-nat-state="" connection-state=related \
    connection-type=""
add action=accept chain=input connection-nat-state="" connection-state="" \
    connection-type="" in-interface=bridge1
add action=log chain=input connection-nat-state="" connection-state="" \
    connection-type="" disabled=yes
add action=drop chain=input connection-nat-state="" connection-state="" \
    connection-type=""
add action=accept chain=forward connection-state=established
add action=accept chain=forward connection-state=related
add action=accept chain=forward comment=Internet connection-state="" \
    dst-address=!192.168.123.0/24 dst-port=80,443 in-interface=bridge1 \
    protocol=tcp
add action=drop chain=forward
/ip firewall nat
add action=masquerade chain=srcnat out-interface=pppoe-out1
/system clock
set time-zone-name=Europe/Berlin
/system logging
add topics=interface,debug
add topics=pppoe
add topics=interface
add topics=firewall
/system routerboard settings
set silent-boot=no
/system scheduler
add interval=10m name=Dyndns on-event=dyndns policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \
    start-date=may/29/2018 start-time=12:48:12
/system script
add name=dyndns owner=admin policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source=":gl\
    obal ddnsuser "WAHWaleaKE1141"\r\
    \n:global ddnspass "waalhewaem11x"\r\
    \n:global theinterface "ether 1"\r\
    \n:global ddnshost wahwaleake1141.dlinkddns.com\r\
    \n:global ipddns [:resolve \$ddnshost];\r\
    \n:global ipfresh [ /ip address get [/ip address find interface=\$theinterfa\
    ce ] address ]\r\
    \n:if ([ :typeof \$ipfresh ] = nil ) do={\r\
    \n   :log info ("DynDNS: No ip address on \$theinterface .")\r\
    \n} else={\r\
    \n   :for i from=( [:len \$ipfresh] - 1) to=0 do={ \r\
    \n      :if ( [:pick \$ipfresh \$i] = "/") do={ \r\
    \n    :set ipfresh [:pick \$ipfresh 0 \$i];\r\
    \n      } \r\
    \n}\r\
    \n \r\
    \n:if (\$ipddns != \$ipfresh) do={\r\
    \n    :log info ("DynDNS: IP-DynDNS = \$ipddns")\r\
    \n    :log info ("DynDNS: IP-Fresh = \$ipfresh")\r\
    \n   :log info "DynDNS: Update IP needed, Sending UPDATE...!"\r\
    \n   :global str "/nic/update\\\?hostname=\$ddnshost&myip=\$ipfresh&wildcar\
    d=NOCHG&mx=NOCHG&backmx=NOCHG"\r\
    \n   /tool fetch address=members.dyndns.org src-path=\$str mode=http user=\$\
    ddnsuser \\\r\
    \n         password=\$ddnspass dst-path=("/DynDNS.".\$ddnshost)\r\
    \n    :delay 1\r\
    \n    :global str [/file find name="DynDNS.\$ddnshost"];\r\
    \n    /file remove \$str\r\
    \n    :global ipddns \$ipfresh\r\
    \n  :log info "DynDNS: IP updated to \$ipfresh!"\r\
    \n    } else={\r\
    \n     :log info "DynDNS: dont need changes";\r\
    \n    }\r\
    \n} "
[admin@MikroTik] /log>

Code: 
Flags: X - disabled, R - running, S - slave 
 #    NAME                   MTU ARP             VLAN-ID INTERFACE               
 0 R  vlan7                 1500 enabled               7 ether1-WAN   [/QUOTE]

[QUOTE]

Flags: X - disabled, I - invalid, D - dynamic 
 0    chain=input action=accept connection-state=established 
      connection-nat-state="" connection-type="" log=no log-prefix="" 

 1    chain=input action=accept connection-state=related connection-nat-state="" 
      connection-type="" log=no log-prefix="" 

 2    chain=input action=accept connection-state="" connection-nat-state="" 
      connection-type="" in-interface=bridge1 log=no log-prefix="" 

 3 X  chain=input action=log connection-state="" connection-nat-state="" 
      connection-type="" log=no log-prefix="" 

 4    chain=input action=drop connection-state="" connection-nat-state="" 
      connection-type="" log=no log-prefix="" 

 5    chain=forward action=accept connection-state=established log=no 
      log-prefix="" 

 6    chain=forward action=accept connection-state=related log=no log-prefix="" 

 7    ;;; Internet
      chain=forward action=accept connection-state="" protocol=tcp 
-- [Q quit|D dump|down]
 
Zuletzt bearbeitet:
Wenn Du für Logs und Exports nicht die Quote Funktion nutzt (Sprechblase), sondern die Code Funktion (# Zeichen), dann ließe sich das etwas besser lesen. (Edit: das Symbol wird wohl nur im erweiterten Editor angezeigt. Funktioniert aber genauso (Mit CODE statt QUOTE)

Dass hw=yes nicht dabei steht, liegt daran, dass es beim Export/Import als Standard angesehen wird. Bei dem Befehl "/export verbose" steht es (neben allem möglichen anderen, unnötigen Kram) mit Sicherheit dabei.

Eine Sekunde Einwahlzeit ist Dir zu lange?
Code: 
14:52:19 interface,info ether1-WAN link up (speed 1G, full duplex)
14:52:20 interface,info ether2 link up (speed 1G, full duplex)
14:52:23 pppoe,ppp,info pppoe-out1: connecting...
....
14:52:24 pppoe,ppp,info pppoe-out1: connected

Gab es sonst noch eine Frage?
 
Zuletzt bearbeitet:
Ok danke werde das grad abändern auf CODE

Eingewählt ist er wenn es mal klappt direkt aber wie man unten sieht dauert das doch etwas länger da einwählen erstmal ständig disconnected wird
Code: 
...
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:37 pppoe,ppp,info pppoe-out1: terminating... 
13:21:37 pppoe,ppp,info pppoe-out1: disconnected 
13:21:37 pppoe,ppp,info pppoe-out1: initializing... 
13:21:37 pppoe,ppp,info pppoe-out1: waiting for packets... 
13:21:40 interface,info ether1-WAN link up (speed 1G, full duplex) 
13:21:41 interface,info ether2 link up (speed 1G, full duplex) 
13:21:49 pppoe,ppp,info pppoe-out1: connecting... 
13:21:51 pppoe,ppp,info pppoe-out1: authenticated 
13:21:51 pppoe,ppp,info pppoe-out1: connected

Ansonsten habe ich noch das Problem das ich beim DHCP Client irgendwie auch keine IP bekomme, es steht immer nur beim Status Searching.
Desweiteren habe ich jetzt auch die Firewall konfiguriert und würde gerne wissen ob es Sicherheitstechnisch jetzt so passt?
 
ether1 und ether2 sind erst ab 13:21:40/41 UP. Die Einwahl kann logischerweise erst danach klappen. Hake es einfach unter dem Punkt an, dass jeder Router eine gewisse Initialisierungszeit braucht.

Zum ether1 DHCP Client hatte ich dir im ersten Post schon gesagt, dass du ihn löschen kannst. Welche Funktion sollte der erfüllen? Das würde nur Sinn machen, wenn ether1 an einem DHCP Server hinge. Das ist aber nicht der Fall. Statt des DHCP Client nutzt Du den PPPoE Client, der wiederum nach Einwahl ordnungsgemäß eine IP bekommt.
 
Erstmal danke für die schnelle und ausführliche Hilfestellung, hab den ether1 DHCP Client mal gelöscht.

Was mich jetzt noch wundert warum über Port 80 die web Oberfläche vom Mikrotik noch erreichbar ist. Alle anderen Ports sind zu.
 
Mach mal
/ip firewall filter export

Deine obige FW Konfig entstammt dem Print Befehl und ist nicht komplett.
 
Anmelden, um zu antworten.
Hardwareluxx setzt keine externen Werbe- und Tracking-Cookies ein. Auf unserer Webseite finden Sie nur noch Cookies nach berechtigtem Interesse (Art. 6 Abs. 1 Satz 1 lit. f DSGVO) oder eigene funktionelle Cookies. Durch die Nutzung unserer Webseite erklären Sie sich damit einverstanden, dass wir diese Cookies setzen. Mehr Informationen und Möglichkeiten zur Einstellung unserer Cookies finden Sie in unserer Datenschutzerklärung.


Zurück
Oben Unten refresh