[COLOR="Red"]G.SKILL F1-4000BIU2-2GBHV[/COLOR]
DRAM Voltage Control.......................... - 2.80V
DRAM+,03V If it`s not 3,2v.................... - Disable
DRAM Configuration Settings:
DRAM Frequency Set............................ - 166=RAM/FSB:01/01
Command Per Clock (CPC)....................... - Enable
CAS Latency Control (Tcl)..................... - 3.0
RAS# to CAS# delay (Trcd)..................... - 03 Bus Clocks
Min RAS# active time (Tras)................... - 02 Bus Clocks
Row precharge time (Trp)...................... - 02 Bus Clocks
Row Cycle time (Trc).......................... - 07 Bus Clocks
Row refresh cyc time (Trfc)................... - 13 Bus Clocks
Row to Row delay (Trrd)....................... - 01 Bus Clocks
Write recovery time (Twr)..................... - 02 Bus Clocks
Write to Read delay (Twtr).................... - 01 Bus Clocks
Read to Write delay (Trtw).................... - 02 Bus Clocks
Refresh Period (Tref)......................... - Auto
DRAM Bank Interleave.......................... - Enabled
DQS Skew Control.............................. - Auto
DQS Skew Value................................ - 0
DRAM Drive Strength........................... - Level 8
DRAM Data Drive Strength...................... - Level 4
Max Async Latency............................. - 8.0
DRAM Response Time............................ - Fastest
Read Preamble Time............................ - 5.0
IdleCycle Limit............................... - 16 Cycles
Dynamic Counter............................... - Disable
R/W Queue Bypass.............................. - 16 x
Bypass Max.................................... - 07 x
32 Byte Granularity........................... - Disable(4 Bursts)
