<2.23-1.08>
BIOS: 2.23 / ECP: 1.08
- (New) Added support for 1600x900 screen resolution on the external display.
- (New) Added support for SanDisk SSD.
<2.22-1.08>
BIOS: 2.22 / ECP: 1.08
- (New) Added support for Microsoft Windows 7.
<2.22-1.08>
BIOS: 2.22 / ECP: 1.08
- (Fix) Fixed an issue where the external display might have blank screen after
closing the lid "When I close the lid: Do nothing" was selected in
Power Options on Windows Vista.
<2.21-1.08>
BIOS: 2.21 / ECP: 1.08
- (New) Added the option to disable wireless switch in the BIOS setup.
- (New) Added PCI Express Power Management disabling capability in BIOS setup.
- (New) Enhanced Video BIOS function.
- (Fix) Fixed an issue that caused a blue screen error on Windows Vista by
updating Intel GM965 Video BIOS to v1668.
- (Fix) Fixed an issue where Windows XP installation might stop responding on
the way.
- (Fix) Fixed an issue where reboot might not be done for all Physical Presence
I/F command execution.
- (Fix) Fixed an issue where the computer with the Smart Card Reader resumed
normal operation immediately after going into sleep mode at critical
low battery state on Windows Vista.
- (Fix) Fixed an issue where some CardBus devices might have slow performance.
<2.20-1.08>
BIOS: 2.20 / ECP: 1.08
- (Fix) Buzzing sound around the fan with battery.
- (Fix) The computer may hang if Rescue and Recovery is installed on Windows
Vista 64-bit SP1.
<2.18-1.08>
BIOS: 2.18 / ECP: 1.08
- (New) Support for Intel ICH-8 step B2 (added).
<2.16-1.08>
BIOS: 2.16 / ECP: 1.08
- (New) Enhancement of security function.
- (New) Support for ICH8 revision B2.
- (Fix) The error, "0191 System Security-Invalid Remote Change requested." may
occur at the power-on.
- (Fix) Some CardBus and IEEE 1394 devices may slow down the performance.
<2.15-1.08>
BIOS: 2.15 / ECP: 1.08
- (Fix) The computer may hang while formatting CardBus ATA drive on Windows
Vista 64-bit SP1.
<2.14-1.08>
BIOS: 2.14 / ECP: 1.08
- (New) Microcode updates of the processors.
- (New) Intel Memory Reference Code update.
- (Fix) Boot error occurs at Intel ICH8M SATA initialization.
- (Fix) The error code 2100 (Hard disk drive 0 initialization error) is
displayed only occasionally after "Setup Default" is done in BIOS Setup
Utility.
- (Fix) The boot sequence is different from the expected one in case of Wake on
LAN (WOL).
<2.10-1.08>
BIOS: 2.10 / ECP: 1.08
- (New) Microcode updates of the processors.
<2.09-1.08>
BIOS: 2.09 / ECP: 1.08
- (Fix) Looks like system hang after continuous Fn-F7 hitting in the BIOS Setup
or DOS.
<2.07-1.08>
BIOS: 2.07 / ECP: 1.08
- (New) Added the new error code 1830 to indicate that a single DIMM is not
installed in the memory slot 0.
Solution for the error code:
With a single DIMM, install the DIMM into the memory slot 0 (a slot
different from having used it).
- (Fix) Unexpected interrupts from the USB controller may occur.
<1.07-1.08>
BIOS: 1.07 / ECP: 1.08
- (Fix) A Bluetooth LED is On on the computer without the Bluetooth card
installed.
- (Fix) The LCD brightness always becomes maximum level after Windows XP starts.
<1.03-1.06>
BIOS: 1.03 / ECP: 1.06
- (New) Initial release.