Ryzen 3700X mit ASRock X470D4U als ESXi-Virtualisierungshost

CPU ja..., aber das Brett? Die Firmware ist da noch gut eingeschränkt. oder ich bekomme das nicht eingestellt.. es gibt ja da ne Menge im Bereich Speicher.
 
Wenn Du diese Anzeige nicht sehen willst, registriere Dich und/oder logge Dich ein.
Achso es gibt dazu keine Settings im UEFI, ja klingt bei einem "Serverboard" eigentlich einleuchtend :lol:
 
doch.. Settings gibt es.. muss mich nur mal damit durchfitzen.. ist ja bald Wochenende.. da geht es rund
ich bin froh, das ich die Kiste gestern auf die Schnelle zusammenbekommen habe.. ZFS noch implementiert und gut ist.. Dann das Backup der VMs wieder drauf
 
Ist ECC jetzt aktiv, oder nicht? Nur weil die Kiste mit dem RAM bootet, heißt das noch lange nicht, dass es auch ECC nutzt. Kannst du das mal checken?
AUch finde ich die 70W jetzt nciht so wirklich prickelnd. Da hat mein Bulldozer mit 48W im Idle und 6 2.5" HDDs ja weniger Stromverbrauch.
Kannst du mal Proxmox testen und mal Powertop ausführen?
 
woran siehe ich das, das ECC aktiv ist? Im UEFI ist da nix zu sehen
 
Memory Test.
 
bin momentan noch unterwegs und keinen Zugriff nach aussen auf das IPMI... aber kannst mir gerne mal ein Testprogramm nennen, welches mir anzeigt, das auch ECC aktiv ist
 
Ein mal ein dmidecode auf der Konsole
 
mentest86+ zeigt dir das auch an. :)
 
Code: 
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 3.2.0 present.
Table at 0x000E6DA0.

Handle 0x0000, DMI type 0, 26 bytes
BIOS Information
	Vendor: American Megatrends Inc.
	Version: P3.10
	Release Date: 07/18/2019
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 16 MB
	Characteristics:
		PCI is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		BIOS ROM is socketed
		EDD is supported
		5.25"/1.2 MB floppy services are supported (int 13h)
		3.5"/720 kB floppy services are supported (int 13h)
		3.5"/2.88 MB floppy services are supported (int 13h)
		Print screen service is supported (int 5h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Targeted content distribution is supported
		UEFI is supported
	BIOS Revision: 5.14

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: To Be Filled By O.E.M.
	Product Name: To Be Filled By O.E.M.
	Version: To Be Filled By O.E.M.
	Serial Number: To Be Filled By O.E.M.
	UUID: 00000000-0000-0000-0000-d05099d3479f
	Wake-up Type: Power Switch
	SKU Number: To Be Filled By O.E.M.
	Family: To Be Filled By O.E.M.

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
	Manufacturer: ASRockRack
	Product Name: X470D4U
	Version:                       
	Serial Number:                       
	Asset Tag:                       
	Features:
		Board is a hosting board
		Board is replaceable
	Location In Chassis:                       
	Chassis Handle: 0x0003
	Type: Motherboard
	Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
	Manufacturer: To Be Filled By O.E.M.
	Type: Desktop
	Lock: Not Present
	Version: To Be Filled By O.E.M.
	Serial Number: To Be Filled By O.E.M.
	Asset Tag: To Be Filled By O.E.M.
	Boot-up State: Safe
	Power Supply State: Safe
	Thermal State: Safe
	Security Status: None
	OEM Information: 0x00000000
	Height: Unspecified
	Number Of Power Cords: 1
	Contained Elements: 0
	SKU Number: To Be Filled By O.E.M.

Handle 0x0004, DMI type 9, 17 bytes
System Slot Information
	Designation: J6B2
	Type: x16 PCI Express
	Current Usage: In Use
	Length: Long
	ID: 0
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:01.0

Handle 0x0005, DMI type 9, 17 bytes
System Slot Information
	Designation: J6B1
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 1
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.3

Handle 0x0006, DMI type 9, 17 bytes
System Slot Information
	Designation: J6D1
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 2
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.4

Handle 0x0007, DMI type 9, 17 bytes
System Slot Information
	Designation: J7B1
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 3
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.5

Handle 0x0008, DMI type 9, 17 bytes
System Slot Information
	Designation: J8B4
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 4
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.6

Handle 0x0009, DMI type 9, 17 bytes
System Slot Information
	Designation: J8D1
	Type: x1 PCI Express
	Current Usage: In Use
	Length: Short
	ID: 5
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1c.7

Handle 0x000A, DMI type 9, 17 bytes
System Slot Information
	Designation: J8B3
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Short
	ID: 6
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1e.0

Handle 0x000B, DMI type 9, 17 bytes
System Slot Information
	Designation: J9B1
	Type: 32-bit PCI
	Current Usage: In Use
	Length: Short
	ID: 7
	Characteristics:
		3.3 V is provided
		Opening is shared
		PME signal is supported
	Bus Address: 0000:00:1e.0

Handle 0x000C, DMI type 11, 5 bytes
OEM Strings
	String 1: To Be Filled By O.E.M.

Handle 0x000D, DMI type 32, 20 bytes
System Boot Information
	Status: No errors detected

Handle 0x000E, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x000F, DMI type 16, 23 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: Multi-bit ECC
	Maximum Capacity: 128 GB
	Error Information Handle: 0x000E
	Number Of Devices: 4

Handle 0x0010, DMI type 19, 31 bytes
Memory Array Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x007FFFFFFFF
	Range Size: 32 GB
	Physical Array Handle: 0x000F
	Partition Width: 2

Handle 0x0011, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L1 - Cache
	Configuration: Enabled, Not Socketed, Level 1
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 576 kB
	Maximum Size: 576 kB
	Supported SRAM Types:
		Pipeline Burst
	Installed SRAM Type: Pipeline Burst
	Speed: 1 ns
	Error Correction Type: Multi-bit ECC
	System Type: Unified
	Associativity: 8-way Set-associative

Handle 0x0012, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L2 - Cache
	Configuration: Enabled, Not Socketed, Level 2
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 3072 kB
	Maximum Size: 3072 kB
	Supported SRAM Types:
		Pipeline Burst
	Installed SRAM Type: Pipeline Burst
	Speed: 1 ns
	Error Correction Type: Multi-bit ECC
	System Type: Unified
	Associativity: 8-way Set-associative

Handle 0x0013, DMI type 7, 27 bytes
Cache Information
	Socket Designation: L3 - Cache
	Configuration: Enabled, Not Socketed, Level 3
	Operational Mode: Write Back
	Location: Internal
	Installed Size: 16384 kB
	Maximum Size: 16384 kB
	Supported SRAM Types:
		Pipeline Burst
	Installed SRAM Type: Pipeline Burst
	Speed: 1 ns
	Error Correction Type: Multi-bit ECC
	System Type: Unified
	Associativity: 16-way Set-associative

Handle 0x0014, DMI type 4, 48 bytes
Processor Information
	Socket Designation: CPU1
	Type: Central Processor
	Family: Zen
	Manufacturer: Advanced Micro Devices, Inc.
	ID: 82 0F 80 00 FF FB 8B 17
	Signature: Family 23, Model 8, Stepping 2
	Flags:
		FPU (Floating-point unit on-chip)
		VME (Virtual mode extension)
		DE (Debugging extension)
		PSE (Page size extension)
		TSC (Time stamp counter)
		MSR (Model specific registers)
		PAE (Physical address extension)
		MCE (Machine check exception)
		CX8 (CMPXCHG8 instruction supported)
		APIC (On-chip APIC hardware supported)
		SEP (Fast system call)
		MTRR (Memory type range registers)
		PGE (Page global enable)
		MCA (Machine check architecture)
		CMOV (Conditional move instruction supported)
		PAT (Page attribute table)
		PSE-36 (36-bit page size extension)
		CLFSH (CLFLUSH instruction supported)
		MMX (MMX technology supported)
		FXSR (FXSAVE and FXSTOR instructions supported)
		SSE (Streaming SIMD extensions)
		SSE2 (Streaming SIMD extensions 2)
		HTT (Multi-threading)
	Version: AMD Ryzen 5 2600 Six-Core Processor            
	Voltage: 1.1 V
	External Clock: 100 MHz
	Max Speed: 3900 MHz
	Current Speed: 3400 MHz
	Status: Populated, Enabled
	Upgrade: Socket AM4
	L1 Cache Handle: 0x0011
	L2 Cache Handle: 0x0012
	L3 Cache Handle: 0x0013
	Serial Number: Unknown
	Asset Tag: Unknown
	Part Number: Unknown
	Core Count: 6
	Core Enabled: 6
	Thread Count: 12
	Characteristics:
		64-bit capable
		Multi-Core
		Hardware Thread
		Execute Protection
		Enhanced Virtualization
		Power/Performance Control

Handle 0x0015, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x0016, DMI type 17, 84 bytes
Memory Device
	Array Handle: 0x000F
	Error Information Handle: 0x0015
	Total Width: Unknown
	Data Width: Unknown
	Size: No Module Installed
	Form Factor: Unknown
	Set: None
	Locator: DIMM 0
	Bank Locator: P0 CHANNEL A
	Type: Unknown
	Type Detail: Unknown
	Speed: Unknown
	Manufacturer: Unknown
	Serial Number: Unknown
	Asset Tag: Not Specified
	Part Number: Unknown
	Rank: Unknown
	Configured Memory Speed: Unknown
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: Unknown
	Memory Technology: <OUT OF SPEC>
	Memory Operating Mode Capability: None
	Firmware Version: Unknown
	Module Manufacturer ID: Unknown
	Module Product ID: Unknown
	Memory Subsystem Controller Manufacturer ID: Unknown
	Memory Subsystem Controller Product ID: Unknown
	Non-Volatile Size: None
	Volatile Size: None
	Cache Size: None
	Logical Size: None

Handle 0x0017, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x0018, DMI type 17, 84 bytes
Memory Device
	Array Handle: 0x000F
	Error Information Handle: 0x0017
	Total Width: 128 bits
	Data Width: 64 bits
	Size: 16384 MB
	Form Factor: DIMM
	Set: None
	Locator: DIMM 1
	Bank Locator: P0 CHANNEL A
	Type: DDR4
	Type Detail: Synchronous Unbuffered (Unregistered)
	Speed: 2666 MT/s
	Manufacturer: Kingston
	Serial Number: F310CB9E
	Asset Tag: Not Specified
	Part Number: 9965669-032.A00G    
	Rank: 2
	Configured Memory Speed: 2400 MT/s
	Minimum Voltage: 1.2 V
	Maximum Voltage: 1.2 V
	Configured Voltage: 1.2 V
	Memory Technology: <OUT OF SPEC>
	Memory Operating Mode Capability: None
	Firmware Version: Unknown
	Module Manufacturer ID: Unknown
	Module Product ID: Unknown
	Memory Subsystem Controller Manufacturer ID: Unknown
	Memory Subsystem Controller Product ID: Unknown
	Non-Volatile Size: None
	Volatile Size: None
	Cache Size: None
	Logical Size: None

Handle 0x0019, DMI type 20, 35 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x007FFFFFFFF
	Range Size: 32 GB
	Physical Device Handle: 0x0018
	Memory Array Mapped Address Handle: 0x0010
	Partition Row Position: Unknown
	Interleave Position: Unknown
	Interleaved Data Depth: Unknown

Handle 0x001A, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x001B, DMI type 17, 84 bytes
Memory Device
	Array Handle: 0x000F
	Error Information Handle: 0x001A
	Total Width: Unknown
	Data Width: Unknown
	Size: No Module Installed
	Form Factor: Unknown
	Set: None
	Locator: DIMM 0
	Bank Locator: P0 CHANNEL B
	Type: Unknown
	Type Detail: Unknown
	Speed: Unknown
	Manufacturer: Unknown
	Serial Number: Unknown
	Asset Tag: Not Specified
	Part Number: Unknown
	Rank: Unknown
	Configured Memory Speed: Unknown
	Minimum Voltage: Unknown
	Maximum Voltage: Unknown
	Configured Voltage: Unknown
	Memory Technology: <OUT OF SPEC>
	Memory Operating Mode Capability: None
	Firmware Version: Unknown
	Module Manufacturer ID: Unknown
	Module Product ID: Unknown
	Memory Subsystem Controller Manufacturer ID: Unknown
	Memory Subsystem Controller Product ID: Unknown
	Non-Volatile Size: None
	Volatile Size: None
	Cache Size: None
	Logical Size: None

Handle 0x001C, DMI type 18, 23 bytes
32-bit Memory Error Information
	Type: OK
	Granularity: Unknown
	Operation: Unknown
	Vendor Syndrome: Unknown
	Memory Array Address: Unknown
	Device Address: Unknown
	Resolution: Unknown

Handle 0x001D, DMI type 17, 84 bytes
Memory Device
	Array Handle: 0x000F
	Error Information Handle: 0x001C
	Total Width: 128 bits
	Data Width: 64 bits
	Size: 16384 MB
	Form Factor: DIMM
	Set: None
	Locator: DIMM 1
	Bank Locator: P0 CHANNEL B
	Type: DDR4
	Type Detail: Synchronous Unbuffered (Unregistered)
	Speed: 2666 MT/s
	Manufacturer: Kingston
	Serial Number: FA10D59E
	Asset Tag: Not Specified
	Part Number: 9965669-032.A00G    
	Rank: 2
	Configured Memory Speed: 2400 MT/s
	Minimum Voltage: 1.2 V
	Maximum Voltage: 1.2 V
	Configured Voltage: 1.2 V
	Memory Technology: <OUT OF SPEC>
	Memory Operating Mode Capability: None
	Firmware Version: Unknown
	Module Manufacturer ID: Unknown
	Module Product ID: Unknown
	Memory Subsystem Controller Manufacturer ID: Unknown
	Memory Subsystem Controller Product ID: Unknown
	Non-Volatile Size: None
	Volatile Size: None
	Cache Size: None
	Logical Size: None

Handle 0x001E, DMI type 20, 35 bytes
Memory Device Mapped Address
	Starting Address: 0x00000000000
	Ending Address: 0x007FFFFFFFF
	Range Size: 32 GB
	Physical Device Handle: 0x001D
	Memory Array Mapped Address Handle: 0x0010
	Partition Row Position: Unknown
	Interleave Position: Unknown
	Interleaved Data Depth: Unknown

Handle 0x001F, DMI type 13, 22 bytes
BIOS Language Information
	Language Description Format: Long
	Installable Languages: 1
		en|US|iso8859-1
	Currently Installed Language: en|US|iso8859-1

Handle 0x0020, DMI type 127, 4 bytes
End Of Table


die Ausgabe von DMIDECODE

Speicher steht auf 64 Bit... müssten das nicht 72 sein?
 
64 Bit heist das du kein ECC hast. ECC ist immer 72 Bit. Teste doch mal mit mentest86+ gegen, wenn da bei ECC no oder non steht, dann hast keinen.
 
Zuletzt bearbeitet:
@b99
ne das passt so, ECC ist aktiv. Error Correction Type: Multi-bit ECC, sonst steht da (ausm Quellcode):

"Other", /* 0x01 */
"Unknown",
"None",
"Parity",
"Single-bit ECC",
"Multi-bit ECC",
"CRC" /* 0x07 */
Zum Vergrößern anklicken....

Hmm, ok also wies bei mir aufm Zen1 aussieht kann ich grad nicht schaun - die data Width ist aber immer 64 (bei DDR4) - zumindest hier aufm Xeon sieht das so aus:

Handle 0x0024, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Single-bit ECC
Maximum Capacity: 2304 GB
Error Information Handle: Not Provided
Number Of Devices: 3

Handle 0x0026, DMI type 17, 84 bytes
Memory Device
Array Handle: 0x0024
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 16384 MB
Form Factor: DIMM
Set: None
Locator: P1-DIMMA1
Bank Locator: P0_Node0_Channel0_Dimm0
Type: DDR4
Type Detail: Synchronous
Speed: 2666 MT/s
Manufacturer: SK Hynix
Serial Number: ***
Asset Tag: P1-DIMMA1_AssetTag (date:18/38)
Part Number: HMA82GR7AFR8N-VK
Rank: 2
Configured Clock Speed: 2400 MT/s
Minimum Voltage: 1.2 V
Maximum Voltage: 1.2 V
Configured Voltage: 1.2 V
Zum Vergrößern anklicken....
 
Zuletzt bearbeitet:
okay.. danke.. bin beruhigt... will jetzt bald das nächste Ram-Kit bestellen... hab meinen alten Server verkloppt
 
Sir Diablo schrieb:
@b99
ne das passt so, ECC ist aktiv. Error Correction Type: Multi-bit ECC, sonst steht da (ausm Quellcode):



Hmm, ok also wies bei mir aufm Zen1 aussieht kann ich grad nicht schaun - die data Width ist aber immer 64 (bei DDR4) - zumindest hier aufm Xeon sieht das so aus:
Zum Vergrößern anklicken....


So wie bei deinem Xeon System wurde es bei meinen auch ausgegeben. Also mit Error Correction Type und Total Width. :)
Bei ihm steht davon ja garnichts, daher dachte ich es funzt nicht, ich würde es trotzdem nochmal überprüfen. Sicher ist sicher.
 
Zuletzt bearbeitet:
Ist das bei mir ein Auslesefehler oder können die Xeon Scalable (hier ein Silver bei mir) nur single-bit und multi-bit ist AMD/IBM only?
 
oNyX` schrieb:
@b99: dmesg | grep -i edac
Zum Vergrößern anklicken....

danke.

Code: 
[    0.084151] EDAC MC: Ver: 3.0.0
[    8.994110] [B]EDAC amd64: Node 0: DRAM ECC enabled.[/B]
[    8.994111] EDAC amd64: F17h detected (node 0).
[    8.994293] EDAC MC: UMC0 chip selects:
[    8.994294] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.994295] EDAC amd64: MC: 2: 16383MB 3: 16383MB
[    8.994295] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.994296] EDAC amd64: MC: 6:     0MB 7:     0MB
[    8.994306] EDAC MC: UMC1 chip selects:
[    8.994306] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.994307] EDAC amd64: MC: 2: 16383MB 3: 16383MB
[    8.994307] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.994307] EDAC amd64: MC: 6:     0MB 7:     0MB
[    8.994308] EDAC amd64: using x8 syndromes.
[    8.994308] EDAC amd64: MCT channel count: 2
[    8.994359] EDAC MC0: Giving out device to module amd64_edac controller F17h: DEV 0000:00:18.3 (INTERRUPT)
[    8.994366] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.0 (POLLED)
[    8.994366] AMD64 EDAC driver v3.5.0

Edit:
hab mal in der Firmware den Speichertakt etwas angehoben: amd1.png
 
Zuletzt bearbeitet:
b99: mal geschaut ob du mit lmsensor an brauchbare Daten aus dem Monitoring Chip kommst, Fan Speed/Board Temp etc, das was man halt sonst auch via IPMI sieht? Bzw ich wuerde passmark Memtest laufen lassen um sicher zu stellen das alles iO ist.
 
lmsensors meldet mir sowas nach der Einrichtung:
Code: 
k10temp-pci-00c3
Adapter: PCI adapter
Tdie:         +30.8°C  (high = +70.0°C)
Tctl:         +30.8°C  

nct6779-isa-0290
Adapter: ISA adapter
Vcore:                  +0.24 V  (min =  +0.00 V, max =  +1.74 V)
in1:                    +1.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
AVCC:                   +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+3.3V:                  +3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                    +1.86 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                    +0.89 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                    +1.19 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VSB:                   +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
Vbat:                   +3.23 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                    +0.00 V  (min =  +0.00 V, max =  +0.00 V)
in10:                   +0.82 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                   +1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                   +1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                   +0.96 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                   +1.86 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                     0 RPM  (min =    0 RPM)
fan2:                     0 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +43.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
CPUTIN:                 +31.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                +16.0°C    sensor = thermistor
AUXTIN1:                +36.0°C    sensor = thermistor
AUXTIN2:                +25.0°C    sensor = thermistor
AUXTIN3:                -29.0°C    sensor = thermistor
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C  
PCH_CHIP_TEMP:           +0.0°C  
PCH_CPU_TEMP:            +0.0°C  
PCH_MCH_TEMP:            +0.0°C  
intrusion0:            ALARM
intrusion1:            ALARM
beep_enable:           disabled

Modul für "IPMI BMC KCS" fehlt im moment
 
>ipmitool sdr liefert das hier:

Code: 
3VSB             | 3.36 Volts        | ok
5VSB             | 5.13 Volts        | ok
VCPU             | 0.38 Volts        | ok
VSOC             | 0.88 Volts        | ok
VCCM             | 1.19 Volts        | ok
APU_VDDP         | 0.95 Volts        | ok
3V               | 3.34 Volts        | ok
5V               | 5.04 Volts        | ok
12V              | 12.20 Volts       | ok
MB Temp          | 43 degrees C      | ok
Card side Temp   | 36 degrees C      | ok
CPU Temp         | 31 degrees C      | ok
DDR4_A2_Temp     | no reading        | ns
DDR4_A1_Temp     | 31 degrees C      | ok
DDR4_B2_Temp     | no reading        | ns
DDR4_B1_Temp     | 31 degrees C      | ok
FAN1             | 1000 RPM          | ok
FAN2             | no reading        | ns
FAN3             | no reading        | ns
FAN4             | no reading        | ns
FAN5             | no reading        | ns
FAN6             | no reading        | ns
ChassisIntr      | 0x00              | ok
CPU_PROCHOT      | 0x00              | ok
CPU_THERMTRIP    | 0x00              | ok
PSU1 Status      | 0x00              | ok
PSU1 AC lost     | Not Readable      | ns
PSU2 Status      | 0x00              | ok
PSU2 AC lost     | Not Readable      | ns
1.05V_PROM_S5    | 1.06 Volts        | ok
2.5V_PROM        | 2.60 Volts        | ok
1.05V_PROM_RUN   | 1.01 Volts        | ok
BAT              | 3.08 Volts        | ok
PSU2 PIN         | no reading        | ns
PSU2 POUT        | no reading        | ns
PSU1 PIN         | no reading        | ns
PSU1 VIN         | no reading        | ns
PSU2 VIN         | no reading        | ns
PSU2 IOUT        | no reading        | ns
PSU1 IOUT        | no reading        | ns
PSU1 POUT        | no reading        | ns
 
Sollte passen ipmi plugin gibts fuer munin oder halt TIG Stack.

https://forum.level1techs.com/t/i-made-a-hwmon-lm-sensors-config-for-asrock-x370-boards-nct6779/117006

https://github.com/rigred/sensor_config/blob/master/X470/ASRock/ASRock-X470-Tachi-Ultimate

Sollte theoretisch funktionieren, grad specs von 6779 Chip durchgelesen.
 
Zuletzt bearbeitet:
ach nee... sry. bin schon wieder bis abend unterwegs... hoffentlich vergesse ich das nicht
 
So, hier nun von mir auch mal ein paar neue Infos. Auch unter VMWare (ESXi 6.7 U2) wird der Speicher mit ECC Fehlerkorrektur betrieben. Der Server läuft jetzt seit einer Woche ohne einen einzigen Fehler oder eine Auffälligkeit. Ein HBA (SAS2008) ist in eine FreeNAS-VM mit 16GB RAM durchgereicht und läuft sehr performant (SMART-Werte und Temps werden angezeigt). Eine zweite PCI-Express-Karte (USB 3.0-Adapter) ist in eine Windows Server-VM (Veeam-Backup mit externen USB-Disks für Offsite-Backup) durchgereicht und läuft fehlerfrei. Das durchreichen der onboard USB3.0-Controller funktioniert trotz "ACS"-Setting leider nicht (VM lässt sich nicht einschalten).

Der Samsung-RAM (16GB-Module DDR4 ECC 2666er, siehe folgendes Dump) passt von seiner Bauhöhe übrigens einwandfrei unter den Original AMD CPU-Kühler des Ryzen 7 3700X (der mit den lustigen LEDs).

Die CPU-Leistung ist einfach beeindruckend. Zum Vergleich: die Videoüberwachungs-VM (4x FullHD-Videostreams inkl. Erkennungsalgorithmen) benötigte unter der identischen Virtualisierung im vorherigen Server (Intel XEON SandyBridge-EP Dual E5-2650 V1) knapp 10GHz in Summe und jetzt mit dem Ryzen 7 3700X noch exakt 8,2GHz bei identischen "Workload". Das zeigt die ordentliche IPC-Leistung der Ryzen 3000-Architektur.

Code: 
Dumping live SMBIOS data!
  BIOS Info: #0
    Size: 0x0001a
    Vendor: "American Megatrends Inc."
    Version: "L3.04"
    Date: "05/23/2019"
    Start Address: 0xf0000
    ROM Size: 16384 kB
    Features: 0x0d0300000001378b9880
      PCI supported
      BIOS flashable
      BIOS shadowing allowed
      CD boot supported
      Selectable boot supported
      BIOS ROM socketed
      EDD spec supported
      1.2MB Floppy supported
      720kB Floppy supported
      2.88MB Floppy supported
      Print Screen supported
      Serial Services supported
      Printer Services supported
      ACPI supported
      USB Legacy supported
      BIOS Boot Spec supported
      Enable targeted content distribution
      UEFI supported
    System BIOS release: 5.14
  System Info: #1
    Manufacturer: "To Be Filled By O.E.M."
    Product: "To Be Filled By O.E.M."
    Version: "To Be Filled By O.E.M."
    Serial: "To Be Filled By O.E.M."
    UUID: f84df000f06500000000000000000000
    Wake-up: 0x06 (Power Switch)
  Board Info: #2
    Manufacturer: "ASRockRack"
    Product: "X470D4U"
    Type: 0x0a (Motherboard)
    Features: 0x09
      Hosting Board
      Replaceable
    Chassis: #3
  Chassis Info: #3
    Manufacturer: "Default string"
    Version: "Default string"
    Serial: "Default string"
    Asset Tag: "Default string"
    Type: 0x03 (Desktop)
    Bootup State: 0x03 (Safe)
    Power Supply State: 0x03 (Safe)
    Thermal State: 0x03 (Safe)
    Security Status: 0x03 (None)
  System Slot: #4
    Designation: "J6B2"
    Type: 0xa5 (PCI Express)
    Bus Width: 0x0d (x16)
    Status: 0x04 (In Use)
    Length: 0x04 (Long)
    Slot ID: 0
    Characteristics: 0x010c (3.3 V, Shared, PME#)
  System Slot: #5
    Designation: "J6B1"
    Type: 0xa5 (PCI Express)
    Bus Width: 0x08 (x1)
    Status: 0x04 (In Use)
    Length: 0x03 (Short)
    Slot ID: 1
    Characteristics: 0x010c (3.3 V, Shared, PME#)
  System Slot: #6
    Designation: "J6D1"
    Type: 0xa5 (PCI Express)
    Bus Width: 0x08 (x1)
    Status: 0x04 (In Use)
    Length: 0x03 (Short)
    Slot ID: 2
    Characteristics: 0x010c (3.3 V, Shared, PME#)
  System Slot: #7
    Designation: "J7B1"
    Type: 0xa5 (PCI Express)
    Bus Width: 0x08 (x1)
    Status: 0x04 (In Use)
    Length: 0x03 (Short)
    Slot ID: 3
    Characteristics: 0x010c (3.3 V, Shared, PME#)
  System Slot: #8
    Designation: "J8B4"
    Type: 0xa5 (PCI Express)
    Bus Width: 0x08 (x1)
    Status: 0x04 (In Use)
    Length: 0x03 (Short)
    Slot ID: 4
    Characteristics: 0x010c (3.3 V, Shared, PME#)
  System Slot: #9
    Designation: "J8D1"
    Type: 0xa5 (PCI Express)
    Bus Width: 0x08 (x1)
    Status: 0x04 (In Use)
    Length: 0x03 (Short)
    Slot ID: 5
    Characteristics: 0x010c (3.3 V, Shared, PME#)
  System Slot: #10
    Designation: "J8B3"
    Type: 0x06 (PCI)
    Bus Width: 0x05 (32 bit)
    Status: 0x04 (In Use)
    Length: 0x03 (Short)
    Slot ID: 6
    Characteristics: 0x010c (3.3 V, Shared, PME#)
  System Slot: #11
    Designation: "J9B1"
    Type: 0x06 (PCI)
    Bus Width: 0x05 (32 bit)
    Status: 0x04 (In Use)
    Length: 0x03 (Short)
    Slot ID: 7
    Characteristics: 0x010c (3.3 V, Shared, PME#)
  OEM Strings: #12
    Default string
  Type 32 Record: #13
    Data 00: 20 14 0d 00 00 00 00 00 00 00 00 00 00 00 00 00
    Data 10: 00 00 00 00
  32bit-Memory Error Info: #14
    Type: 0x03 (OK)
    Granularity: 0x02 (Unknown)
    Operation: 0x02 (Unknown)
  Physical Memory Array: #15
    Use: 0x03 (System memory)
    Location: 0x03 (Motherboard)
    Slots: 4
    Max. Size: 128 GB
    ECC: 0x06 (Multi-bit)
    Error Info: #14
  Memory Array Mapping: #16
    Memory Array: #15
    Partition Width: 4
    Start Address: 0x00000000
    End Address: 0xf0000000
  Memory Array Mapping: #17
    Memory Array: #15
    Partition Width: 4
    Start Address: 0x0000000100000000
    End Address: 0x0000001010000000
  Cache Info: #18
    Designation: "L1 - Cache"
    Level: L1
    State: Enabled
    Mode: 0x01 (Write Back)
    Location: 0x00 (Internal, Not Socketed)
    ECC: 0x06 (Multi-bit)
    Type: 0x05 (Unified)
    Associativity: 0x07 (8-way Set-Associative)
    Max. Size: 512 kB
    Current Size: 512 kB
    Speed: 1 ns
    Supported SRAM Types: 0x0010 (Pipeline Burst)
    Current SRAM Type: 0x0010 (Pipeline Burst)
  Cache Info: #19
    Designation: "L2 - Cache"
    Level: L2
    State: Enabled
    Mode: 0x01 (Write Back)
    Location: 0x00 (Internal, Not Socketed)
    ECC: 0x06 (Multi-bit)
    Type: 0x05 (Unified)
    Associativity: 0x07 (8-way Set-Associative)
    Max. Size: 4096 kB
    Current Size: 4096 kB
    Speed: 1 ns
    Supported SRAM Types: 0x0010 (Pipeline Burst)
    Current SRAM Type: 0x0010 (Pipeline Burst)
  Cache Info: #20
    Designation: "L3 - Cache"
    Level: L3
    State: Enabled
    Mode: 0x01 (Write Back)
    Location: 0x00 (Internal, Not Socketed)
    ECC: 0x06 (Multi-bit)
    Type: 0x05 (Unified)
    Associativity: 0x08 (16-way Set-Associative)
    Max. Size: 32768 kB
    Current Size: 32768 kB
    Speed: 1 ns
    Supported SRAM Types: 0x0010 (Pipeline Burst)
    Current SRAM Type: 0x0010 (Pipeline Burst)
  Processor Info: #21
    Payload length: 0x30
    Socket: "AM4"
    Socket Type: 0x31 (Other)
    Socket Status: Populated
    Type: 0x03 (CPU)
    Family: 0x6b (Other)
    Manufacturer: "Advanced Micro Devices, Inc."
    Version: "AMD Ryzen 7 3700X 8-Core Processor"
    Serial: "Unknown"
    Asset Tag: "Unknown"
    Part Number: "Unknown"
    Processor ID: 0x178bfbff00870f10
    Status: 0x01 (Enabled)
    Voltage: 1.1 V
    External Clock: 100 MHz
    Max. Speed: 4400 MHz
    Current Speed: 3600 MHz
    L1 Cache: #18
    L2 Cache: #19
    L3 Cache: #20
    Core Count: #8
    Core Enabled Count: #8
    Thread Count: #16
  32bit-Memory Error Info: #22
    Type: 0x03 (OK)
    Granularity: 0x02 (Unknown)
    Operation: 0x02 (Unknown)
  Memory Device: #23
    Location: "DIMM 0"
    Bank: "P0 CHANNEL A"
    Manufacturer: "Samsung"
    Serial: "12830E76"
    Part Number: "M391A2K43BB1-CTD"
    Memory Array: #15
    Error Info: #22
    Form Factor: 0x09 (DIMM)
    Type: 0x1a (DDR4)
    Type Detail: 0x4080 (Synchronous, Unregistered)
    Data Width: 64 bits (+64 ECC bits)
    Size: 16 GB
    Speed: 2666 MHz
  Memory Device Mapping: #24
    Memory Device: #23
    Array Mapping: #17
    Start Address: 0x0000000000000000
    End Address: 0x0000001000000000
  32bit-Memory Error Info: #25
    Type: 0x03 (OK)
    Granularity: 0x02 (Unknown)
    Operation: 0x02 (Unknown)
  Memory Device: #26
    Location: "DIMM 1"
    Bank: "P0 CHANNEL A"
    Manufacturer: "Samsung"
    Serial: "1282F0B6"
    Part Number: "M391A2K43BB1-CTD"
    Memory Array: #15
    Error Info: #25
    Form Factor: 0x09 (DIMM)
    Type: 0x1a (DDR4)
    Type Detail: 0x4080 (Synchronous, Unregistered)
    Data Width: 64 bits (+64 ECC bits)
    Size: 16 GB
    Speed: 2666 MHz
  Memory Device Mapping: #27
    Memory Device: #26
    Array Mapping: #17
    Start Address: 0x0000000000000000
    End Address: 0x0000001000000000
  32bit-Memory Error Info: #28
    Type: 0x03 (OK)
    Granularity: 0x02 (Unknown)
    Operation: 0x02 (Unknown)
  Memory Device: #29
    Location: "DIMM 0"
    Bank: "P0 CHANNEL B"
    Manufacturer: "Samsung"
    Serial: "1282DED7"
    Part Number: "M391A2K43BB1-CTD"
    Memory Array: #15
    Error Info: #28
    Form Factor: 0x09 (DIMM)
    Type: 0x1a (DDR4)
    Type Detail: 0x4080 (Synchronous, Unregistered)
    Data Width: 64 bits (+64 ECC bits)
    Size: 16 GB
    Speed: 2666 MHz
  Memory Device Mapping: #30
    Memory Device: #29
    Array Mapping: #17
    Start Address: 0x0000000000000000
    End Address: 0x0000001000000000
  32bit-Memory Error Info: #31
    Type: 0x03 (OK)
    Granularity: 0x02 (Unknown)
    Operation: 0x02 (Unknown)
  Memory Device: #32
    Location: "DIMM 1"
    Bank: "P0 CHANNEL B"
    Manufacturer: "Samsung"
    Serial: "1282DF5A"
    Part Number: "M391A2K43BB1-CTD"
    Memory Array: #15
    Error Info: #31
    Form Factor: 0x09 (DIMM)
    Type: 0x1a (DDR4)
    Type Detail: 0x4080 (Synchronous, Unregistered)
    Data Width: 64 bits (+64 ECC bits)
    Size: 16 GB
    Speed: 2666 MHz
  Memory Device Mapping: #33
    Memory Device: #32
    Array Mapping: #17
    Start Address: 0x0000000000000000
    End Address: 0x0000001000000000
  Language Info: #34
    Languages: en|US|iso8859-1
    Current: en|US|iso8859-1
 
@Marteng
Du müsstest mal schauen welche Devices mit in der IOMMU Gruppe des onboard USB Controller drin stecken - wenn du die dann Alle an die VM durchreichst, sollte es klappen. Wie man die IOMMU Gruppen unter esx listet weiß ich nicht, würd an deiner Stelle dazu kurz ein live Linux mit der kernel arg
GRUB_CMDLINE_LINUX_DEFAULT="quiet amd_iommu=on"
Zum Vergrößern anklicken....
booten und dann mit
find /sys/kernel/iommu_groups/ -type l
Zum Vergrößern anklicken....
und
lspci
Zum Vergrößern anklicken....
nachschauen was da sonst noch mit drin steckt.
 
@Sir Diablo
Danke für den Hinweis. Da der Server bereits im Haus (privat eingesetzt) für mehrere Parteien produktiv ist (Firewall,DC,Fileserver,SAT-IP,etc...), muss ich für weitere Tests mal ein Zeitfenster beantragen :)

Um einen wertvollen PCIe-Slot (z.B. zukünftig für eine GPU) zu sparen, werde ich den Passthrough des USB3.0-Controllers an der ATX-Rückblende (NICHT Onboard-Port) zusammen mit dem Audio-Device und dem weiteren Device nochmal bei Zeiten testen.

Chipset.JPG

USB3-1.JPG

USB3.JPG
 
Danke fuer die Muehe, ernuechternd... :/

Mein Xeon 1245v2 mit 4Dimm, 6x Fans, 8HDD, 1SSD und Sata Ctrl haengt bei 67w idle (2VMs, 6 CT).
 
Anmelden, um zu antworten.

Ähnliche Themen

ebniv
  • Artikel
[Sammelthread] Gigabyte MC12-LE0 (AM4, B550, servertauglich: IPMI, Dual Lan, ECC)
95 96 97
Antworten
3K
Aufrufe
262K
BobbyD
BobbyD
Hardwareluxx setzt keine externen Werbe- und Tracking-Cookies ein. Auf unserer Webseite finden Sie nur noch Cookies nach berechtigtem Interesse (Art. 6 Abs. 1 Satz 1 lit. f DSGVO) oder eigene funktionelle Cookies. Durch die Nutzung unserer Webseite erklären Sie sich damit einverstanden, dass wir diese Cookies setzen. Mehr Informationen und Möglichkeiten zur Einstellung unserer Cookies finden Sie in unserer Datenschutzerklärung.


Zurück
Oben Unten refresh