Suchergebnisse

Try tCWL 14 if using tCL 16. I know that helps me with gear 1 on z690 Strix d4. Auto timings on some bios set tCWL 1 lower and some systems don't like odd tCWL.

Your timings/frequency is worse overall. Your RTLs are horrible compared to his. Probably need to enable Round Trip Latency in Algorithms.

Just a guess is OS. That alone can be a good 5-8ns difference. Also cache speed will effect latency if comparing same timings and mem frequency. To get the best latency you need to have nothing running in the back ground of the OS.

Are you using Windows 10 or 11? I just compared them and Win11 has worse performance for me.

Even a good 2022 z690 Apex is far from a good z790 Apex. No reason to get a z690 Apex unless it is really cheap and you want to experiment and test your patients.

There is ME Firmware(16.1.25.2020) and MEI Driver(2240.3.4.0) this is for z690 Strix d4 on the official Asus site. I wouldn't just flash the newest ME Firmware as listed by Mokichu on Asus forum unless you have a reason. Running a newer version can cause issues so be careful as difficult to...

@skullbringer tested/compared various memory die https://www.igorslab.de/en/basics-how-we-test-memory-kits-from-now-on-reference-configs-with-all-current-ddr5-ics-and-ddr4-g1- in-synthetics-and-no-games/9/

Check your if auto is setting tWRPRE too tight at 46 or 48. Loosening helped me to get Karhu stable. I posted some results a while back on ocn 8000 https://www.overclock.net/threads/official-asus-strix-maximus-z790-owners-thread.1800191/post-29135548 8200...

Also worked for me on Team Group 7200 kit. Thanks @H3adex

Your SP might be off if you do ME Firmware after the bios update. To get an accurate SP flash to an older or newer bios and then back to your current if you care about an accurate SP. SP and VIDs being inaccurate can cause issues if running auto voltages as too high or too low of VIDs (what SP...

MSI z790i Edge can do high clocks on mem and high clocks on CPU. https://www.overclock.net/threads/official-intel-ddr5-oc-and-24-7-daily-memory-stability-thread.1794772/post-29133276 Y cruncher 2.5b and 1.5b...

Installing in this order is best practice and to display an accurate SP. Intel MEI Driver, Intel ME firmware, Flash BIOS If done out of order SP will likely be incorrect and the way to fix is flash to an older or newer bios and then back to your current. Flashing the same bios will not...

Use this to get some ideas for your MB

Most likely your MB is the issue/weak link. Look at MB QVL or Gskill Rm config. There is a reason they only show 6000 to 6400. https://www.gskill.com/configurator?page=1&cls=1529635169&manufacturer=1524715126&chipset=1635734425&model=1635754429&adSearch2=Tested_Speed§6000 MT/s , Many 4 dim...

The ones that show 200 to 800MBs have something configured differently. Even ddr5 will hit only around 65 to 75MBs Example look at safedisk Average Coverage Speed at 8800c38 74MBs https://www.overclock.net/threads/official-asus-strix-maximus-z790-owners-thread.1800191/post-29114564 Here is a...

Memory OC is hit and miss on many z690 MB. It is hit and miss on z790 but more so on z690. M die if you can run past 6400-6600 you will be doing good. If A die can do 6800-7000+ you got a good MB. Just so you know in case memory speed is important to you. Edit I see you want to run 4 sticks...

I would guess it is the memory cant do it or not enough voltage. Will take a very good bin to run 1.55v 4000c14-15-15. Unless it has been binned and tested on another MB my guess it ram. I have/had dozen of SR and DR b die and my weaker kits can only do 4000c16-16-16 @1.5v. they wont scale with...

You need to flash to a newer or older bios version. When SP bug is present flashing the same bios version will not correct this in my experience/testing. Ideally I would use the oldest bios(2103) that KS supports for your MB and then flash to 2204. Example if on bios 2204 use EZ flash to older...

On z690 Strix d4 I tested 2103, 2204 and 2301 and for me on 13900k and 139000KS I saw no difference for mem OC. I think the latest 2 have a newer microcode 10E. When I was testing y cruncher I set 55/45/45 and left cpu voltages on auto and the newer bioses ran approx 10c coolers that is why I...

F6 at the end of a run when using Benchmate makes y cruncher/r23 etc more useful. It will show much more info. Cpu and mem models, clocks and temps, bios etc. Just a screenshot without it or other info it is not as useful. Example of using F6...