Kann mir jemand von euch helfen?
Ich habe schon länger ein EP-45 DS4 und OCZ DD2 1066 (PC2-8500) ram.
Nun kommt es aber im mom öfter zu Freezes. Gehe davon aus das ich irgendwann mal im Bios was falsch eingestellt habe, bekomme es aber nicht mehr richtig hin.
Meine Daten sind:
[Current Computer]
Computer Brand Name: GIGABYTE EP45-DS4
[Operating System]
Central Processor(s) ------------------------------------------------------
[CPU Unit Count]
Number Of Processor Packages (Physical): 1
Number Of Processors Cores: 4
Number Of Logical Processors: 4
Intel Core 2 Quad Q9550 ---------------------------------------------------
[General Information]
Processor Name: Intel Core 2 Quad Q9550
Original Processor Frequency: 2833.3 MHz
Original Processor Frequency [MHz]: 2833
CPU ID: 0001067A
CPU Brand Name: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz
CPU Vendor: GenuineIntel
CPU Stepping: E0
CPU Code Name: Yorkfield
CPU S-Spec: SLB8V
CPU Thermal Design Power (TDP): 95.0 W
CPU Max. Case Temperature (Tcase_max): 71.4 °C
CPU Type: Production Unit
CPU Platform: LGA775 (FC-LGA8)
Microcode Update Revision: A07
Number of CPU Cores: 4
Number of Logical CPUs: 4
[Operating Points]
CPU LFM (Minimum): 2000.0 MHz = 6.00 x 333.3 MHz @ 1.1000 V
CPU HFM (Maximum): 2833.3 MHz = 8.50 x 333.3 MHz @ 1.2500 V [Locked]
CPU Current: 2832.9 MHz = 8.50 x 333.3 MHz @ 1.2500 V
CPU Bus Type: FSB (QDR)
[Cache and TLB]
L1 Cache: Instruction: 2 x 32 KBytes, Data: 2 x 32 KBytes
L2 Cache: Integrated: 2 x 6 MBytes
Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries
Data TLB: 4 MB Pages, 4-way set associative, 32 entries
[Standard Feature Flags]
FPU on Chip Present
Enhanced Virtual-86 Mode Present
I/O Breakpoints Present
Page Size Extensions Present
Time Stamp Counter Present
Pentium-style Model Specific Registers Present
Physical Address Extension Present
Machine Check Exception Present
CMPXCHG8B Instruction Present
APIC On Chip / PGE (AMD) Present
Fast System Call Present
Memory Type Range Registers Present
Page Global Feature Present
Machine Check Architecture Present
CMOV Instruction Present
Page Attribute Table Present
36-bit Page Size Extensions Present
Processor Number Not Present
CLFLUSH Instruction Present
Debug Trace and EMON Store Present
Internal ACPI Support Present
MMX Technology Present
Fast FP Save/Restore (IA MMX-2) Present
Streaming SIMD Extensions Present
Streaming SIMD Extensions 2 Present
Self-Snoop Present
Multi-Threading Capable Present
Automatic Clock Control Present
IA-64 Processor Not Present
Signal Break on FERR Present
Streaming SIMD Extensions 3 Present
Carryless Multiplication (PCLMULQDQ)/GFMUL Not Present
64-Bit Debug Store Present
MONITOR/MWAIT Support Present
CPL Qualified Debug Store Present
Virtual Machine Extensions Present
Safer Mode Extensions (Intel TXT) Present
Thermal Monitor 2 Present
Supplemental Streaming SIMD Extensions 3 Present
Enhanced SpeedStep Technology Present
L1 Context ID Not Present
Segment Limit Checking Not Present
Fused Multiply Add Not Present
CMPXCHG16B Support Present
Send Task Priority Messages Disabling Present
Performance/Debug Capability MSR Present
Processor Context ID Not Present
Direct Cache Access Not Present
Streaming SIMD Extensions 4.1 Present
Streaming SIMD Extensions 4.2 Not Present
Extended xAPIC Not Present
MOVBE Instruction Not Present
POPCNT Instruction Not Present
TSC-deadline Timer Not Present
AES Cryptography Support Not Present
XSAVE/XRSTOR/XSETBV/XGETBV Instructions Present
XGETBV/XSETBV OS Enabled Not Present
AVX Support Not Present
Float16 Instructions Not Present
Random Number Read Instruction Not Present
[Extended Feature Flags]
64-bit Extensions Present
RDTSCP and TSC_AUX Support Not Present
1 GB large page support Not Present
No Execute Present
SYSCALL/SYSRET Support Not Present
[Enhanced Features]
Thermal Monitor 1: Supported, Enabled
Thermal Monitor 2: Supported, Enabled
Enhanced Intel SpeedStep (GV3): Supported, Enabled
Bi-directional PROCHOT#: Enabled
Extended Auto-HALT State C1E: Enabled
Extended Stop Grant State C2E: N/A
Enhanced Halt State C3E: N/A
Enhanced Halt State C4E: N/A
Enhanced Halt State Hard C4E: N/A
Hardware Prefetcher: Supported, Enabled
DCU Prefetcher: Supported, Enabled
IP Prefetcher: Supported, Enabled
Adjacent Cache Line Prefetch: Supported, Enabled
MLC Streamer Prefetcher Not Supported
MLC Spatial Prefetcher Not Supported
DCU Streamer Prefetcher Not Supported
DCU IP Prefetcher Not Supported
Intel Dynamic Acceleration (IDA) Technology: Not Supported
Intel Dynamic FSB Switching: Not Supported
Enhanced Multi Threaded Thermal Management: N/A
Intel Turbo Boost Technology: Not Supported
Programmabe Ratio Limits: Not Supported
Programmabe TDC/TDP Limits: Not Supported
[Memory Ranges]
Maximum Physical Address Size: 36-bit (64 GBytes)
Maximum Virtual Address Size: 48-bit (256 TBytes)
[MTRRs]
Range 0-200000000 (0MB-8192MB) Type: Write Back (WB)
Range 200000000-240000000 (8192MB-9216MB) Type: Write Back (WB)
Range CFF00000-D0000000 (3327MB-3328MB) Type: Uncacheable (UC)
Range D0000000-E0000000 (3328MB-3584MB) Type: Uncacheable (UC)
Range E0000000-100000000 (3584MB-4096MB) Type: Uncacheable (UC)
Range 230000000-240000000 (8960MB-9216MB) Type: Uncacheable (UC)
Motherboard ---------------------------------------------------------------
[Computer]
Computer Brand Name: GIGABYTE EP45-DS4
[Motherboard]
Motherboard Model: GIGABYTE EP45-DS4
Motherboard Chipset: Intel P45 (Eaglelake-P) + ICH10R
Motherboard Slots: 1xPCI, 3xPCI Express x1, 1xPCI Express x16
PCI Express Version Supported: v2.0
USB Version Supported: v2.0
[(G)MCH Features]
Secondary PCI Express Port x16: Supported
Dual Independent Display: Not Supported
Primary PCI Express Port x16: Supported
2 DIMMS per Channel: Supported
Manageability Engine (ME): Supported
iAMT: Supported
Intel Virtualization Technology for I/O Devices (VT-d): Not Supported
Internal Graphics: Not Supported
Primary PCI Express Port: Supported
DDR2 Frequency Support: 400 MHz (DDR2-800)
DDR3 Frequency Support: 666 MHz (DDR3-1333)
FSB Frequency Support: 333 MHz (1333 QDR)
[ICH10 Features]
Intel AMT Support: Not Supported
SATA RAID 0/1/5/10: Supported
[BIOS]
BIOS Manufacturer: Award Modular BIOS v6.00PG
BIOS Date: 09/30/08
BIOS Version: F9
EFI BIOS: Not Capable
Super-IO/LPC Chip: ITE IT8720F/FX/GX
Memory --------------------------------------------------------------------
[General information]
Total Memory Size: 8 GBytes
Total Memory Size [MB]: 8192
[Current Performance Settings]
Maximum Supported Memory Clock: 666.7 MHz
Current Memory Clock: 533.3 MHz (8 : 5 ratio)
Current Timing (tCAS-tRCD-tRP-tRAS): 5.0-7-7-20
Memory Runs At: Dual-Channel
Command Rate: 2T
Read to Read Delay (tRD_RD) Same Rank: 4T
Read to Read Delay (tRD_RD) Different Rank: 8T
Write to Write Delay (tWR_WR) Same Rank: 4T
Write to Write Delay (tWR_WR) Different Rank: 8T
Read to Write Delay (tRD_WR) Different Rank: 9T
Write to Read Delay (tWR_RD) Same Rank (tWTR): 12T
Write to Read Delay (tWR_RD) Different Rank: 7T
Read to Precharge Delay (tRTP): 6T
Write to Precharge Delay (tWTP/tWR): 16T
RAS# to RAS# Delay (tRRD): 4T
Refresh Cycle Time (tRFC): 72T
Four Activate Window (tFAW): 8T
Row: 0 - 2048 MB PC2-8500 DDR2-SDRAM OCZ OCZ2P10662G ---------------
[General Module Information]
Module Number: 0
Module Size: 2048 MBytes
Memory Type: DDR2-SDRAM
DIMM Type: Regular Unbuffered (UDIMM)
Error Check/Correction: None
Memory Speed: 533.3 MHz (PC2-8500)
Module Manufacturer: OCZ
Module Model: OCZ2P10662G
Serial Number: N/A
Manufacturing Date: Unknown
[Module Characteristics]
Module Width: 64-bits
Module Voltage: SSTL 1.8V
SPD Revision: 1.0
Number Of Ranks: 2
Row Address Bits: 14
Column Address Bits: 10
Number Of Banks: 8
[Module timing]
Supported Burst Lengths: 4, 8
Refresh Rate: Reduced 0.5x (7.8 us)
Supported CAS Latencies (tCAS): 5.0, 4.0, 3.0
Min. RAS-to-CAS Delay (tRCD): 12.50 ns
Min. Row Precharge Time (tRP): 12.50 ns
Min. RAS Pulse Width (tRAS): 37 ns
Supported Module Timing at 400.0 MHz: 5.0-5-5-15
Supported Module Timing at 333.3 MHz: 4.0-5-5-13
Supported Module Timing at 266.7 MHz: 3.0-4-4-10
Min. Row-Activate To Row-Activate Delay (tRRD): 7.50 ns
Write Recovery Time (tWR): 15.00 ns
Internal write to read command delay (tWTR): 7.50 ns
Internal read to precharge command delay (tRTP): 7.50 ns
Minimum Activate to Activate/Refresh Time (tRC): 60.00 ns
Minimum Refresh to Activate/Refresh Command Period (tRFC): 133.25 ns
Address and Command Setup Time Before Clock (tIS): 0.17 ns
Address and Command Setup Time After Clock (tIH): 0.25 ns
Data Input Setup Time Before Strobe (tDS): 0.05 ns
Data Input Setup Time After Strobe (tDH): 0.12 ns
[Enhanced Performance Profiles]
Optimal Performance Profile: #1
[Profile #1]
Voltage Level: 2.10 V
Address Command Rate: 2T
CAS Latency: 5
Min. Cycle Time At Supported CAS Latency: 1.875 ns (533.3 MHz)
Min. RAS-to-CAS Delay (tRCD): 9.25 ns
Min. Row Precharge Time (tRP): 9.25 ns
Min. RAS Pulse Width (tRAS): 28 ns
Supported Module Timing at 533.3 MHz: 5.0-5-5-15
Min. Activate to Activate/Refresh Time (tRC): 48 ns
Write Recovery Time (tWR): 11.25 ns
Address Drive Strength: 1.00x
Chip Select Drive Strength: 1.00x
Clock Drive Strength: 1.00x
Data Drive Strength: 1.00x
DQS Drive Strength: 1.00x
Address/Command Fine Delay: None
Address/Command Setup Time: 1 MEMCLK
Address/Command Fine Delay: 5/64 MEMCLKs
Address/Command Setup Time: 1 MEMCLK
Row: 1 - 2048 MB PC2-8500 DDR2-SDRAM OCZ OCZ2P10662G ---------------
[General Module Information]
Module Number: 1
Module Size: 2048 MBytes
Memory Type: DDR2-SDRAM
DIMM Type: Regular Unbuffered (UDIMM)
Error Check/Correction: None
Memory Speed: 533.3 MHz (PC2-8500)
Module Manufacturer: OCZ
Module Model: OCZ2P10662G
Serial Number: N/A
Manufacturing Date: Unknown
[Module Characteristics]
Module Width: 64-bits
Module Voltage: SSTL 1.8V
SPD Revision: 1.0
Number Of Ranks: 2
Row Address Bits: 14
Column Address Bits: 10
Number Of Banks: 8
[Module timing]
Supported Burst Lengths: 4, 8
Refresh Rate: Reduced 0.5x (7.8 us)
Supported CAS Latencies (tCAS): 5.0, 4.0, 3.0
Min. RAS-to-CAS Delay (tRCD): 12.50 ns
Min. Row Precharge Time (tRP): 12.50 ns
Min. RAS Pulse Width (tRAS): 37 ns
Supported Module Timing at 400.0 MHz: 5.0-5-5-15
Supported Module Timing at 333.3 MHz: 4.0-5-5-13
Supported Module Timing at 266.7 MHz: 3.0-4-4-10
Min. Row-Activate To Row-Activate Delay (tRRD): 7.50 ns
Write Recovery Time (tWR): 15.00 ns
Internal write to read command delay (tWTR): 7.50 ns
Internal read to precharge command delay (tRTP): 7.50 ns
Minimum Activate to Activate/Refresh Time (tRC): 60.00 ns
Minimum Refresh to Activate/Refresh Command Period (tRFC): 133.25 ns
Address and Command Setup Time Before Clock (tIS): 0.17 ns
Address and Command Setup Time After Clock (tIH): 0.25 ns
Data Input Setup Time Before Strobe (tDS): 0.05 ns
Data Input Setup Time After Strobe (tDH): 0.12 ns
[Enhanced Performance Profiles]
Optimal Performance Profile: #1
[Profile #1]
Voltage Level: 2.10 V
Address Command Rate: 2T
CAS Latency: 5
Min. Cycle Time At Supported CAS Latency: 1.875 ns (533.3 MHz)
Min. RAS-to-CAS Delay (tRCD): 9.25 ns
Min. Row Precharge Time (tRP): 9.25 ns
Min. RAS Pulse Width (tRAS): 28 ns
Supported Module Timing at 533.3 MHz: 5.0-5-5-15
Min. Activate to Activate/Refresh Time (tRC): 48 ns
Write Recovery Time (tWR): 11.25 ns
Address Drive Strength: 1.00x
Chip Select Drive Strength: 1.00x
Clock Drive Strength: 1.00x
Data Drive Strength: 1.00x
DQS Drive Strength: 1.00x
Address/Command Fine Delay: None
Address/Command Setup Time: 1 MEMCLK
Address/Command Fine Delay: 5/64 MEMCLKs
Address/Command Setup Time: 1 MEMCLK
Row: 2 - 2048 MB PC2-8500 DDR2-SDRAM OCZ OCZ2P10662G ---------------
[General Module Information]
Module Number: 2
Module Size: 2048 MBytes
Memory Type: DDR2-SDRAM
DIMM Type: Regular Unbuffered (UDIMM)
Error Check/Correction: None
Memory Speed: 533.3 MHz (PC2-8500)
Module Manufacturer: OCZ
Module Model: OCZ2P10662G
Serial Number: N/A
Manufacturing Date: Unknown
[Module Characteristics]
Module Width: 64-bits
Module Voltage: SSTL 1.8V
SPD Revision: 1.0
Number Of Ranks: 2
Row Address Bits: 14
Column Address Bits: 10
Number Of Banks: 8
[Module timing]
Supported Burst Lengths: 4, 8
Refresh Rate: Reduced 0.5x (7.8 us)
Supported CAS Latencies (tCAS): 5.0, 4.0, 3.0
Min. RAS-to-CAS Delay (tRCD): 12.50 ns
Min. Row Precharge Time (tRP): 12.50 ns
Min. RAS Pulse Width (tRAS): 37 ns
Supported Module Timing at 400.0 MHz: 5.0-5-5-15
Supported Module Timing at 333.3 MHz: 4.0-5-5-13
Supported Module Timing at 266.7 MHz: 3.0-4-4-10
Min. Row-Activate To Row-Activate Delay (tRRD): 7.50 ns
Write Recovery Time (tWR): 15.00 ns
Internal write to read command delay (tWTR): 7.50 ns
Internal read to precharge command delay (tRTP): 7.50 ns
Minimum Activate to Activate/Refresh Time (tRC): 60.00 ns
Minimum Refresh to Activate/Refresh Command Period (tRFC): 133.25 ns
Address and Command Setup Time Before Clock (tIS): 0.17 ns
Address and Command Setup Time After Clock (tIH): 0.25 ns
Data Input Setup Time Before Strobe (tDS): 0.05 ns
Data Input Setup Time After Strobe (tDH): 0.12 ns
[Enhanced Performance Profiles]
Optimal Performance Profile: #1
[Profile #1]
Voltage Level: 2.10 V
Address Command Rate: 2T
CAS Latency: 5
Min. Cycle Time At Supported CAS Latency: 1.875 ns (533.3 MHz)
Min. RAS-to-CAS Delay (tRCD): 9.25 ns
Min. Row Precharge Time (tRP): 9.25 ns
Min. RAS Pulse Width (tRAS): 28 ns
Supported Module Timing at 533.3 MHz: 5.0-5-5-15
Min. Activate to Activate/Refresh Time (tRC): 48 ns
Write Recovery Time (tWR): 11.25 ns
Address Drive Strength: 1.00x
Chip Select Drive Strength: 1.00x
Clock Drive Strength: 1.00x
Data Drive Strength: 1.00x
DQS Drive Strength: 1.00x
Address/Command Fine Delay: None
Address/Command Setup Time: 1 MEMCLK
Address/Command Fine Delay: 5/64 MEMCLKs
Address/Command Setup Time: 1 MEMCLK
Row: 3 - 2048 MB PC2-8500 DDR2-SDRAM OCZ OCZ2P10662G ---------------
[General Module Information]
Module Number: 3
Module Size: 2048 MBytes
Memory Type: DDR2-SDRAM
DIMM Type: Regular Unbuffered (UDIMM)
Error Check/Correction: None
Memory Speed: 533.3 MHz (PC2-8500)
Module Manufacturer: OCZ
Module Model: OCZ2P10662G
Serial Number: N/A
Manufacturing Date: Unknown
[Module Characteristics]
Module Width: 64-bits
Module Voltage: SSTL 1.8V
SPD Revision: 1.0
Number Of Ranks: 2
Row Address Bits: 14
Column Address Bits: 10
Number Of Banks: 8
[Module timing]
Supported Burst Lengths: 4, 8
Refresh Rate: Reduced 0.5x (7.8 us)
Supported CAS Latencies (tCAS): 5.0, 4.0, 3.0
Min. RAS-to-CAS Delay (tRCD): 12.50 ns
Min. Row Precharge Time (tRP): 12.50 ns
Min. RAS Pulse Width (tRAS): 37 ns
Supported Module Timing at 400.0 MHz: 5.0-5-5-15
Supported Module Timing at 333.3 MHz: 4.0-5-5-13
Supported Module Timing at 266.7 MHz: 3.0-4-4-10
Min. Row-Activate To Row-Activate Delay (tRRD): 7.50 ns
Write Recovery Time (tWR): 15.00 ns
Internal write to read command delay (tWTR): 7.50 ns
Internal read to precharge command delay (tRTP): 7.50 ns
Minimum Activate to Activate/Refresh Time (tRC): 60.00 ns
Minimum Refresh to Activate/Refresh Command Period (tRFC): 133.25 ns
Address and Command Setup Time Before Clock (tIS): 0.17 ns
Address and Command Setup Time After Clock (tIH): 0.25 ns
Data Input Setup Time Before Strobe (tDS): 0.05 ns
Data Input Setup Time After Strobe (tDH): 0.12 ns
[Enhanced Performance Profiles]
Optimal Performance Profile: #1
[Profile #1]
Voltage Level: 2.10 V
Address Command Rate: 2T
CAS Latency: 5
Min. Cycle Time At Supported CAS Latency: 1.875 ns (533.3 MHz)
Min. RAS-to-CAS Delay (tRCD): 9.25 ns
Min. Row Precharge Time (tRP): 9.25 ns
Min. RAS Pulse Width (tRAS): 28 ns
Supported Module Timing at 533.3 MHz: 5.0-5-5-15
Min. Activate to Activate/Refresh Time (tRC): 48 ns
Write Recovery Time (tWR): 11.25 ns
Address Drive Strength: 1.00x
Chip Select Drive Strength: 1.00x
Clock Drive Strength: 1.00x
Data Drive Strength: 1.00x
DQS Drive Strength: 1.00x
Address/Command Fine Delay: None
Address/Command Setup Time: 1 MEMCLK
Address/Command Fine Delay: 5/64 MEMCLKs
Address/Command Setup Time: 1 MEMCLK
Kann mir jemand sagen was ich anders einstellen muss? Irgendwie gehe ich davon aus das es Timing Probleme sind.
Alle Memtests verliefen ohne Probleme
Wäre Euch echt dankbar
.....
