Retrogamer
Enthusiast
Thread Starter
- Mitglied seit
- 08.11.2007
- Beiträge
- 6.284
Hi, ich habe leider keinen Thread gefunden in dem SMART Werte besprochen werden, daher habe ich mal hier einen für mich erstellt.
Ich konnte leider nirgends finden was der Wert Runtime_Bad_Block bedeuten soll.
Code:
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-1CH166
Serial Number: *********
LU WWN Device Id: 5 000c50 0639f81e0
Firmware Version: CC27
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sun Feb 9 23:02:02 2014 CET
==> WARNING: A firmware update for this drive may be available, [COLOR=#ff0000][B]GIBT KEINE NEUE![/B][/COLOR]
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 322) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 230987736
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 456
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 061 059 030 Pre-fail Always - 21482035696
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3039
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 21
[COLOR=#ff0000][B]183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1[/B][/COLOR]
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 072 060 045 Old_age Always - 28 (Min/Max 22/29)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17
193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 6688
194 Temperature_Celsius 0x0022 028 040 000 Old_age Always - 28 (0 13 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 883h+08m+24.374s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 11738130535
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 10572195858
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 2236 -
# 2 Extended offline Completed without error 00% 2068 -
# 3 Extended offline Completed without error 00% 1900 -
# 4 Extended offline Completed without error 00% 1732 -
# 5 Extended offline Completed without error 00% 1564 -
# 6 Extended offline Completed without error 00% 1396 -
# 7 Extended offline Completed without error 00% 1228 -
# 8 Extended offline Completed without error 00% 1060 -
# 9 Extended offline Completed without error 00% 892 -
#10 Extended offline Completed without error 00% 724 -
#11 Extended offline Completed without error 00% 555 -
#12 Extended offline Completed without error 00% 387 -
#13 Extended offline Completed without error 00% 219 -
#14 Extended offline Completed without error 00% 53 -
#15 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.Ich konnte leider nirgends finden was der Wert Runtime_Bad_Block bedeuten soll.
Zuletzt bearbeitet:
