Werbung
Kommen wir nun zu den Einstellungen des BIOS:
| CPU/HT-Referenztakt | 200 - 400 MHz |
| Speichertakt | 1066/1333/1600/2000 MHz |
| HT-Link-Frequenz | 200 - 2000 MHz in 200-MHz-Schritten |
| CPU-Spannung | Standard + 0,6 Volt in 25-mV-Schritten |
| Speicher-Spannung | Standard + 0,4 Volt in 25-mV-Schritten |
| HT-Spanung | Standard + 0,4 Volt in 25-mV-Schritten |
| Northbridge-Spannung | Standard + 0,3 Volt in 0,1-V-Schritten |
Für den Speicher stehen folgende Einstellungen bereit:
| DRAM CAS# Latency | 4 - 12 |
| DRAM RAS# to CAS# Delay | 5 - 12 |
| DRAM RAS# PRE Time | 5 - 12 |
| DRAM READ to PRE Time | 4 - 7 |
| DRAM Row Cycle Time | 15 - 30 |
| DRAM WRITE Recovery Time | 5 - 12 |
| DRAM RAS# to RAS# Delay | 4 - 7 |
| DRAM READ to WRITE Delay | 3 - 17 |
| DRAM WRITE to READ Delay (DD) | 2 - 10 |
| DRAM WRITE to READ Delay (SD) | 4 - 7 |
| DRAM WRITE to WRITE Timing | 3 - 10 |
| DRAM READ to READ Timing | 3 - 10 |
| DRAM REF Cycle Time | 90/110/160/300/350 ns |
| DRAM Refresh Rate | 3,9/7,8 ms |
| DRAM Command Rate | 1T/2T |