Suchergebnisse

Does anyone here have any contact with Intel engineers or their higher ups? I am 100% sure why this problem exists. AC Loadline is not functioning correctly. I wrote this on OCN. It's VERY obvious if you think about it. But someone needs to contact Intel and tell this to them, someone who can...

I already PM's an Intel engineer about this, although he worked on MTL and other platforms. It's really VERY simple. But I don't know if it's INTENTIONAL or a BUG. It's VERY VERY Simple. AC Loadline is using a fixed value based on ICCMAX rather than using predicted current read through SVID...

Hi guys, I just read this article. Intel's comments confirmed my worst fears; Intel does NOT know what AC Loadline is doing to the processor's voltage request! AC Loadline is supposed to be "predicted current" * mohm value. This was the system used for Z170-Z390. Intel saying that AC Loadline...

It's a bit more complicated than this. But then again, no one cares what I say because no one believes me. 1.52v isn't even a safe IDLE voltage with LAPTOP SPEC LLC (1.1 mohms loadline calibration!). I tested this on a 13900K, 1.51v bios set, LLC Level 3, no load, idle for a week. Degraded from...

Yeah there's a P125 and P123 out there. In the hands of world record overclockers.

I think it's the highest P core SP sample they have at Asus HQ (P-SP 125). I know one user who has a 123 (also pre-binned). I do not know anyone with retail chips who has come anywhere close to this.

To reuse the original IHS, you must do the same thing that you did with the 9900k originally, you must sand down the underside edges of the IHS by about 0.2mm to compensate for the removal of the z-height of the solder. Then once done, after applying LM to both surfaces, you can apply 4 very...

A known problem with Xbox One Controller in bluetooth mode. FPS "max" drops by about 30% when you move the analog stick (or another input) on the controller. Problem may not be apparent if you are limiting FPS with "Vsync" or "RTSS scanline sync" or FPS limiter. Problem has been reported for...

Bluetooth or Xbox Wireless Adapter or USB wired cable??

No. Passing R23 loop (30 minute stability test) would only make you game stable at BEST. If you are at your "vmin" for the R23 test (5mv lower would BSOD or WHEA error before 30 minutes), Stockfish Chess AVX2/BMI2 would BSOD very quickly. https://abrok.eu/stockfish/ Stockfish seems to need...

OK. So, after your RMA, please consider: Thermalright bracket (anti-bend frame) OR Fiberglass bracket (aliexpress)--these are the two best ones. Fiberglass bracket should be safer for liquid metal applications on top of IHS. fiberglass is hard to find, the one Igor's Lab really liked, I think...

Do you have a Noctua Secufirm 2 bracket available? (from NH-D15 air cooler?). I think you can use this with Liquid Freezer II 360 or 420 AIO. I already tested Secufirm 2 backplate with Eisbaer Extreme 280 AIO--(Eisbaer backplate is horrible--please never use this abortion abomination!) it is...

Hi, first of all, 1.39v LLC6 will not drop to 1.209v under load. Even LLC5 will not drop this far. Estimated 210A: (based on my own testing). 1390mv - (210 * 0.79mohm) = 1236mv and this is LLC5 (0.79mohm) = 1.236v load. LLC6 is even stronger (0.49 mohm): 1390mv - (210 * .48)= 1289mv = 1.289v...

What is the "Direct P-core" SP for your chip? Not total SP, P-core only? You can see this in "AI OPTIONS" I think. If you cannot run prediction at 5.5 and 5.6 ghz I think you should RMA the chip as defective. Your law in EU covers this. I just checked my SP 113 (P core) chip right now for you...

What is the "Prediction" value for LLC4 in your BIOS? (Set sync all cores x55, then check the prediction, don't load a saved profile or it will use the "x58" prediction until you enter a multiplier again). Example: 1.370v, LLC4 predicted value. Do not use LLC5 or 6 (these prediction values are...

what? how?

It was just me asking if you tried the 1.128v load voltatge (at 5.5ghz) with the extra tweaks Core PLL 0.975v and VCCIN 1.86v, to run CB R23 for 30 minutes. Your CPU Pcore SP is 113, just like my QS, right?

Hi,you never replied back to my last post/message a few days ago.

That's with FMA3 (AVX2) small FFT. (30.8 build 16) AVX1 is about 40A lower. No one is cooling FMA3 small FFT at 5.5 ghz+ without either de-lid or custom water blocks or MORA 420's. SSE small FFT is a beggar test. A better test is Y-cruncher SFT loop stress test, or Stockfish Chess (Arena or...