[Sammelthread] Der 20€ Server [Part 2]

Ich kann dir nur aus eigener Erfahrung sagen dass Arch dank der bleeding edge Geschichte oft bei updates oder sysupgrades sehr viel frust bereitet! DA war dann noch der Umstieg auf systemd und das war der reinste Horror! Ich würde dir immer eher zu Debian stable oder testing raten... Hoffe du kriegst die goflex noch richtig zum laufen.
 
Zuletzt bearbeitet:
Wenn Du diese Anzeige nicht sehen willst, registriere Dich und/oder logge Dich ein.
Rescue ist drauf da komm ich auch ohne stick ohne probleme drauf nur wie es weiter geht kp ob wheezy oder debian mir egal;) soll eigentlich nur als datenspeicher und filme spender für meine dm sein ;)


Von meinem Apfelphone gesendet mit der Hardwareluxx app
 
Bräuchte Tester und Beitragende für das Git-Repo unter:
https://github.com/ingmar-k/OXNAS_Kernel_2.6.32.61.git

Wenn das klappen sollte, dann könnte man theoretisch damit endlich die neueren Debian Distris etc. ohne große Komplikationen mit den V3 Pogoplugs nutzen können.
Hab mal versucht die relativ aktuellen Silverstone Patches anzuwenden.
Gäbe noch Neueres von Medion/Zyxel, aber das wäre noch mehr Aufwand gewesen. Vielleicht in Zukunft noch, wenn das hier mal gehen sollte. Learning by doing. ;)
 
oki nimm alles zurück wheezy instaliert sich gerade fein auf den stick ;) hatte nen falsches rescue system drauf ;)

EDIT: zu früh gefreut am schluss fehler gebracht :/
 
Zuletzt bearbeitet:
Sorry, aber so kann dir hier absolut keiner helfen! Fehlerbeschreibungen erfordern ein bisschen mehr Details!
 
hier mal der letzte abschnitt wo er fehler raushaut :(

Code:
I: Configuring openssh-client...
I: Configuring openssh-server...
I: Configuring linux-image-kirkwood...
I: Configuring initramfs-tools...
W: Failure while configuring base packages.  This will be re-attempted up to five times.
W: See /tmp/debian/debootstrap/debootstrap.log for details (possibly the package initramfs-tools is at fault)
I: Configuring flash-kernel...
I: Configuring initramfs-tools...
W: Failure while configuring base packages.  This will be re-attempted up to five times.
W: See /tmp/debian/debootstrap/debootstrap.log for details (possibly the package initramfs-tools is at fault)
I: Configuring initramfs-tools...
W: Failure while configuring base packages.  This will be re-attempted up to five times.
W: See /tmp/debian/debootstrap/debootstrap.log for details (possibly the package initramfs-tools is at fault)
I: Configuring initramfs-tools...
W: Failure while configuring base packages.  This will be re-attempted up to five times.
W: See /tmp/debian/debootstrap/debootstrap.log for details (possibly the package initramfs-tools is at fault)
I: Configuring initramfs-tools...
W: Failure while configuring base packages.  This will be re-attempted up to five times.
W: See /tmp/debian/debootstrap/debootstrap.log for details (possibly the package initramfs-tools is at fault)
debootstrap failed.
See /tmp/debian/debootstrap/debootstrap.log for more information.
rescue:/tmp#
 
Ja und? Das Paket initramfs-tools kann nicht konfiguriert werden. Und die genaueren Fehlerbeschreibungen sind in "/tmp/debian/debootstrap/debootstrap.log" zu finden.
Also, was besagt die Datei?
 
Hier der komplette log ich blick da leider nicht durch wo der fehler ist und wie ich ihn beheben kann!

Code:
Connecting to cdn.debian.net (195.71.68.86:80)

debootstrap.invalid_   0% |                               |     0  --:--:-- ETA
debootstrap.invalid_ 100% |*******************************|   163k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

debootstrap.invalid_   0% |                               |     0  --:--:-- ETA
debootstrap.invalid_   9% |**                             |   531k 00:00:09 ETA
debootstrap.invalid_  20% |******                         |  1140k 00:00:07 ETA
debootstrap.invalid_  31% |*********                      |  1760k 00:00:06 ETA
debootstrap.invalid_  42% |*************                  |  2393k 00:00:05 ETA
debootstrap.invalid_  53% |****************               |  2999k 00:00:04 ETA
debootstrap.invalid_  65% |********************           |  3633k 00:00:03 ETA
debootstrap.invalid_  76% |***********************        |  4260k 00:00:02 ETA
debootstrap.invalid_  87% |**************************     |  4889k 00:00:01 ETA
debootstrap.invalid_  98% |****************************** |  5513k 00:00:00 ETA
debootstrap.invalid_ 100% |*******************************|  5582k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libacl1_2.2.51-8_arm   0% |                               |     0  --:--:-- ETA
libacl1_2.2.51-8_arm 100% |*******************************| 27564  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

adduser_3.113+nmu3_a   0% |                               |     0  --:--:-- ETA
adduser_3.113+nmu3_a 100% |*******************************|   257k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

apt_0.9.7.9_armel.de   0% |                               |     0  --:--:-- ETA
apt_0.9.7.9_armel.de  43% |*************                  |   534k 00:00:01 ETA
apt_0.9.7.9_armel.de  95% |*****************************  |  1164k 00:00:00 ETA
apt_0.9.7.9_armel.de 100% |*******************************|  1217k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libapt-pkg4.12_0.9.7   0% |                               |     0  --:--:-- ETA
libapt-pkg4.12_0.9.7  62% |*******************            |   538k 00:00:00 ETA
libapt-pkg4.12_0.9.7 100% |*******************************|   854k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libattr1_1%3a2.4.46-   0% |                               |     0  --:--:-- ETA
libattr1_1%3a2.4.46- 100% |*******************************| 18476  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

base-files_7.1wheezy   0% |                               |     0  --:--:-- ETA
base-files_7.1wheezy 100% |*******************************| 78266  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

base-passwd_3.5.26_a   0% |                               |     0  --:--:-- ETA
base-passwd_3.5.26_a 100% |*******************************| 45226  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

bash_4.2+dfsg-0.1_ar   0% |                               |     0  --:--:-- ETA
bash_4.2+dfsg-0.1_ar  37% |***********                    |   532k 00:00:01 ETA
bash_4.2+dfsg-0.1_ar  82% |*************************      |  1157k 00:00:00 ETA
bash_4.2+dfsg-0.1_ar 100% |*******************************|  1407k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libbz2-1.0_1.0.6-4_a   0% |                               |     0  --:--:-- ETA
libbz2-1.0_1.0.6-4_a 100% |*******************************| 49878  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

coreutils_8.13-3.5_a   0% |                               |     0  --:--:-- ETA
coreutils_8.13-3.5_a  10% |***                            |   527k 00:00:08 ETA
coreutils_8.13-3.5_a  22% |******                         |  1155k 00:00:06 ETA
coreutils_8.13-3.5_a  34% |**********                     |  1764k 00:00:05 ETA
coreutils_8.13-3.5_a  44% |*************                  |  2328k 00:00:04 ETA
coreutils_8.13-3.5_a  57% |*****************              |  2961k 00:00:03 ETA
coreutils_8.13-3.5_a  69% |*********************          |  3592k 00:00:02 ETA
coreutils_8.13-3.5_a  81% |*************************      |  4215k 00:00:01 ETA
coreutils_8.13-3.5_a  93% |****************************   |  4852k 00:00:00 ETA
coreutils_8.13-3.5_a 100% |*******************************|  5187k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

cpio_2.11+dfsg-0.1_a   0% |                               |     0  --:--:-- ETA
cpio_2.11+dfsg-0.1_a 100% |*******************************|   255k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

dash_0.5.7-3_armel.d   0% |                               |     0  --:--:-- ETA
dash_0.5.7-3_armel.d 100% |*******************************|   102k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libdb5.1_5.1.29-5_ar   0% |                               |     0  --:--:-- ETA
libdb5.1_5.1.29-5_ar  81% |*************************      |   518k 00:00:00 ETA
libdb5.1_5.1.29-5_ar 100% |*******************************|   632k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

debconf_1.5.49_all.d   0% |                               |     0  --:--:-- ETA
debconf_1.5.49_all.d 100% |*******************************|   167k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

debconf-i18n_1.5.49_   0% |                               |     0  --:--:-- ETA
debconf-i18n_1.5.49_ 100% |*******************************|   231k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

debian-archive-keyri   0% |                               |     0  --:--:-- ETA
debian-archive-keyri 100% |*******************************| 30420  00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

debianutils_4.3.2_ar   0% |                               |     0  --:--:-- ETA
debianutils_4.3.2_ar 100% |*******************************| 77596  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

devio_1.2-1+b1_armel   0% |                               |     0  --:--:-- ETA
devio_1.2-1+b1_armel 100% |*******************************| 16932  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

dhcpcd_1%3a3.2.3-11_   0% |                               |     0  --:--:-- ETA
dhcpcd_1%3a3.2.3-11_ 100% |*******************************| 50170  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

dialog_1.1-20120215-   0% |                               |     0  --:--:-- ETA
dialog_1.1-20120215-  40% |************                   |   120k 00:00:02 ETA
dialog_1.1-20120215- 100% |*******************************|   300k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

diffutils_1%3a3.2-6_   0% |                               |     0  --:--:-- ETA
diffutils_1%3a3.2-6_ 100% |*******************************|   346k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

dpkg_1.16.10_armel.d   0% |                               |     0  --:--:-- ETA
dpkg_1.16.10_armel.d  21% |******                         |   536k 00:00:03 ETA
dpkg_1.16.10_armel.d  46% |**************                 |  1164k 00:00:02 ETA
dpkg_1.16.10_armel.d  72% |**********************         |  1791k 00:00:01 ETA
dpkg_1.16.10_armel.d  97% |****************************** |  2418k 00:00:00 ETA
dpkg_1.16.10_armel.d 100% |*******************************|  2477k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

e2fslibs_1.42.5-1.1_   0% |                               |     0  --:--:-- ETA
e2fslibs_1.42.5-1.1_ 100% |*******************************|   182k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

e2fsprogs_1.42.5-1.1   0% |                               |     0  --:--:-- ETA
e2fsprogs_1.42.5-1.1  53% |****************               |   522k 00:00:00 ETA
e2fsprogs_1.42.5-1.1 100% |*******************************|   971k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libcomerr2_1.42.5-1.   0% |                               |     0  --:--:-- ETA
libcomerr2_1.42.5-1. 100% |*******************************| 54848  00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libss2_1.42.5-1.1_ar   0% |                               |     0  --:--:-- ETA
libss2_1.42.5-1.1_ar 100% |*******************************| 59138  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libc-bin_2.13-38_arm   0% |                               |     0  --:--:-- ETA
libc-bin_2.13-38_arm  45% |*************                  |   538k 00:00:01 ETA
libc-bin_2.13-38_arm  98% |****************************** |  1164k 00:00:00 ETA
libc-bin_2.13-38_arm 100% |*******************************|  1177k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libc6_2.13-38_armel.   0% |                               |     0  --:--:-- ETA
libc6_2.13-38_armel.  12% |***                            |   532k 00:00:06 ETA
libc6_2.13-38_armel.  28% |********                       |  1157k 00:00:05 ETA
libc6_2.13-38_armel.  43% |*************                  |  1789k 00:00:03 ETA
libc6_2.13-38_armel.  58% |*****************              |  2419k 00:00:02 ETA
libc6_2.13-38_armel.  74% |**********************         |  3052k 00:00:01 ETA
libc6_2.13-38_armel.  89% |***************************    |  3681k 00:00:00 ETA
libc6_2.13-38_armel. 100% |*******************************|  4120k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

multiarch-support_2.   0% |                               |     0  --:--:-- ETA
multiarch-support_2. 100% |*******************************|   146k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

findutils_4.4.2-4_ar   0% |                               |     0  --:--:-- ETA
findutils_4.4.2-4_ar  90% |***************************    |   540k 00:00:00 ETA
findutils_4.4.2-4_ar 100% |*******************************|   599k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

flash-kernel_3.3_arm   0% |                               |     0  --:--:-- ETA
flash-kernel_3.3_arm 100% |*******************************| 25452  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

gcc-4.7-base_4.7.2-5   0% |                               |     0  --:--:-- ETA
gcc-4.7-base_4.7.2-5 100% |*******************************|   140k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libgcc1_1%3a4.7.2-5_   0% |                               |     0  --:--:-- ETA
libgcc1_1%3a4.7.2-5_ 100% |*******************************| 56582  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libstdc++6_4.7.2-5_a   0% |                               |     0  --:--:-- ETA
libstdc++6_4.7.2-5_a 100% |*******************************|   281k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

gnupg_1.4.12-7_armel   0% |                               |     0  --:--:-- ETA
gnupg_1.4.12-7_armel   6% |*                              |   124k 00:00:27 ETA
gnupg_1.4.12-7_armel  42% |*************                  |   781k 00:00:04 ETA
gnupg_1.4.12-7_armel  76% |***********************        |  1413k 00:00:01 ETA
gnupg_1.4.12-7_armel 100% |*******************************|  1856k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

gpgv_1.4.12-7_armel.   0% |                               |     0  --:--:-- ETA
gpgv_1.4.12-7_armel. 100% |*******************************|   200k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libgnutls26_2.12.20-   0% |                               |     0  --:--:-- ETA
libgnutls26_2.12.20-  91% |****************************   |   538k 00:00:00 ETA
libgnutls26_2.12.20- 100% |*******************************|   587k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

grep_2.12-2_armel.de   0% |                               |     0  --:--:-- ETA
grep_2.12-2_armel.de 100% |*******************************|   426k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

gzip_1.5-1.1_armel.d   0% |                               |     0  --:--:-- ETA
gzip_1.5-1.1_armel.d 100% |*******************************|   113k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

hostname_3.11_armel.   0% |                               |     0  --:--:-- ETA
hostname_3.11_armel. 100% |*******************************| 14392  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

ifupdown_0.7.8_armel   0% |                               |     0  --:--:-- ETA
ifupdown_0.7.8_armel 100% |*******************************| 62048  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

initramfs-tools_0.10   0% |                               |     0  --:--:-- ETA
initramfs-tools_0.10 100% |*******************************| 91274  00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

insserv_1.14.0-5_arm   0% |                               |     0  --:--:-- ETA
insserv_1.14.0-5_arm 100% |*******************************| 63778  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

iproute_20120521-3+b   0% |                               |     0  --:--:-- ETA
iproute_20120521-3+b 100% |*******************************|   440k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

iputils-ping_3%3a201   0% |                               |     0  --:--:-- ETA
iputils-ping_3%3a201 100% |*******************************| 61916  00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libkeyutils1_1.5.5-3   0% |                               |     0  --:--:-- ETA
libkeyutils1_1.5.5-3 100% |*******************************|  7762  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

klibc-utils_2.0.1-3.   0% |                               |     0  --:--:-- ETA
klibc-utils_2.0.1-3. 100% |*******************************|   199k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libklibc_2.0.1-3.1_a   0% |                               |     0  --:--:-- ETA
libklibc_2.0.1-3.1_a 100% |*******************************| 59316  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

kmod_9-3_armel.deb     0% |                               |     0  --:--:-- ETA
kmod_9-3_armel.deb   100% |*******************************| 60368  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libkmod2_9-3_armel.d   0% |                               |     0  --:--:-- ETA
libkmod2_9-3_armel.d 100% |*******************************| 46184  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libgssapi-krb5-2_1.1   0% |                               |     0  --:--:-- ETA
libgssapi-krb5-2_1.1 100% |*******************************|   128k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libk5crypto3_1.10.1+   0% |                               |     0  --:--:-- ETA
libk5crypto3_1.10.1+ 100% |*******************************|   108k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libkrb5-3_1.10.1+dfs   0% |                               |     0  --:--:-- ETA
libkrb5-3_1.10.1+dfs 100% |*******************************|   334k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libkrb5support0_1.10   0% |                               |     0  --:--:-- ETA
libkrb5support0_1.10 100% |*******************************| 46188  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libbsd0_0.4.2-1_arme   0% |                               |     0  --:--:-- ETA
libbsd0_0.4.2-1_arme 100% |*******************************| 58106  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libedit2_2.11-200806   0% |                               |     0  --:--:-- ETA
libedit2_2.11-200806 100% |*******************************| 62080  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libgcrypt11_1.5.0-5_   0% |                               |     0  --:--:-- ETA
libgcrypt11_1.5.0-5_ 100% |*******************************|   292k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libgpg-error0_1.10-3   0% |                               |     0  --:--:-- ETA
libgpg-error0_1.10-3 100% |*******************************| 78356  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libidn11_1.25-2_arme   0% |                               |     0  --:--:-- ETA
libidn11_1.25-2_arme 100% |*******************************|   171k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

liblocale-gettext-pe   0% |                               |     0  --:--:-- ETA
liblocale-gettext-pe 100% |*******************************| 19762  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libselinux1_2.1.9-5_   0% |                               |     0  --:--:-- ETA
libselinux1_2.1.9-5_ 100% |*******************************| 83954  00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libsemanage-common_2   0% |                               |     0  --:--:-- ETA
libsemanage-common_2 100% |*******************************| 23220  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libsemanage1_2.1.6-6   0% |                               |     0  --:--:-- ETA
libsemanage1_2.1.6-6 100% |*******************************| 89148  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libsepol1_2.1.4-3_ar   0% |                               |     0  --:--:-- ETA
libsepol1_2.1.4-3_ar 100% |*******************************|   123k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libtasn1-3_2.13-2_ar   0% |                               |     0  --:--:-- ETA
libtasn1-3_2.13-2_ar 100% |*******************************| 63184  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libtext-charwidth-pe   0% |                               |     0  --:--:-- ETA
libtext-charwidth-pe 100% |*******************************| 10786  00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libtext-iconv-perl_1   0% |                               |     0  --:--:-- ETA
libtext-iconv-perl_1 100% |*******************************| 16846  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libtext-wrapi18n-per   0% |                               |     0  --:--:-- ETA
libtext-wrapi18n-per 100% |*******************************|  9004  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libusb-0.1-4_2%3a0.1   0% |                               |     0  --:--:-- ETA
libusb-0.1-4_2%3a0.1 100% |*******************************| 21996  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libuuid-perl_0.02-5_   0% |                               |     0  --:--:-- ETA
libuuid-perl_0.02-5_ 100% |*******************************|  9204  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

linux-image-3.2.0-4-   0% |                               |     0  --:--:-- ETA
linux-image-3.2.0-4-   3% |                               |   542k 00:00:26 ETA
linux-image-3.2.0-4-   7% |**                             |  1166k 00:00:23 ETA
linux-image-3.2.0-4-  12% |***                            |  1798k 00:00:21 ETA
linux-image-3.2.0-4-  16% |****                           |  2412k 00:00:20 ETA
linux-image-3.2.0-4-  20% |******                         |  3045k 00:00:19 ETA
linux-image-3.2.0-4-  24% |*******                        |  3671k 00:00:18 ETA
linux-image-3.2.0-4-  28% |********                       |  4302k 00:00:17 ETA
linux-image-3.2.0-4-  33% |**********                     |  4932k 00:00:16 ETA
linux-image-3.2.0-4-  37% |***********                    |  5633k 00:00:14 ETA
linux-image-3.2.0-4-  42% |*************                  |  6254k 00:00:13 ETA
linux-image-3.2.0-4-  46% |**************                 |  6883k 00:00:12 ETA
linux-image-3.2.0-4-  50% |***************                |  7516k 00:00:11 ETA
linux-image-3.2.0-4-  52% |****************               |  7859k 00:00:12 ETA
linux-image-3.2.0-4-  56% |*****************              |  8473k 00:00:11 ETA
linux-image-3.2.0-4-  61% |******************             |  9106k 00:00:10 ETA
linux-image-3.2.0-4-  65% |********************           |  9733k 00:00:08 ETA
linux-image-3.2.0-4-  69% |*********************          | 10370k 00:00:07 ETA
linux-image-3.2.0-4-  73% |**********************         | 10995k 00:00:06 ETA
linux-image-3.2.0-4-  78% |************************       | 11616k 00:00:05 ETA
linux-image-3.2.0-4-  82% |*************************      | 12248k 00:00:04 ETA
linux-image-3.2.0-4-  86% |**************************     | 12875k 00:00:03 ETA
linux-image-3.2.0-4-  90% |***************************    | 13509k 00:00:02 ETA
linux-image-3.2.0-4-  94% |*****************************  | 14131k 00:00:01 ETA
linux-image-3.2.0-4-  99% |****************************** | 14758k 00:00:00 ETA
linux-image-3.2.0-4- 100% |*******************************| 14880k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

linux-base_3.5_all.d   0% |                               |     0  --:--:-- ETA
linux-base_3.5_all.d 100% |*******************************| 34310  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

linux-image-kirkwood   0% |                               |     0  --:--:-- ETA
linux-image-kirkwood 100% |*******************************|  5606  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

lsb-base_4.1+Debian8   0% |                               |     0  --:--:-- ETA
lsb-base_4.1+Debian8 100% |*******************************| 26750  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

mawk_1.3.3-17_armel.   0% |                               |     0  --:--:-- ETA
mawk_1.3.3-17_armel. 100% |*******************************| 84140  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libncurses5_5.9-10_a   0% |                               |     0  --:--:-- ETA
libncurses5_5.9-10_a 100% |*******************************| 96036  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libncursesw5_5.9-10_   0% |                               |     0  --:--:-- ETA
libncursesw5_5.9-10_ 100% |*******************************|   117k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libtinfo5_5.9-10_arm   0% |                               |     0  --:--:-- ETA
libtinfo5_5.9-10_arm 100% |*******************************|   257k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

ncurses-base_5.9-10_   0% |                               |     0  --:--:-- ETA
ncurses-base_5.9-10_ 100% |*******************************|   193k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

ncurses-bin_5.9-10_a   0% |                               |     0  --:--:-- ETA
ncurses-bin_5.9-10_a 100% |*******************************|   322k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libssl1.0.0_1.0.1e-2   0% |                               |     0  --:--:-- ETA
libssl1.0.0_1.0.1e-2  50% |***************                |   534k 00:00:00 ETA
libssl1.0.0_1.0.1e-2 100% |*******************************|  1052k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libp11-kit0_0.12-3_a   0% |                               |     0  --:--:-- ETA
libp11-kit0_0.12-3_a 100% |*******************************| 48736  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libpam-modules_1.1.3   0% |                               |     0  --:--:-- ETA
libpam-modules_1.1.3 100% |*******************************|   315k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libpam-modules-bin_1   0% |                               |     0  --:--:-- ETA
libpam-modules-bin_1 100% |*******************************|    97k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libpam-runtime_1.1.3   0% |                               |     0  --:--:-- ETA
libpam-runtime_1.1.3 100% |*******************************|   222k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libpam0g_1.1.3-7.1_a   0% |                               |     0  --:--:-- ETA
libpam0g_1.1.3-7.1_a 100% |*******************************|   120k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libprocps0_1%3a3.3.3   0% |                               |     0  --:--:-- ETA
libprocps0_1%3a3.3.3 100% |*******************************| 57086  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libreadline6_6.2+dfs   0% |                               |     0  --:--:-- ETA
libreadline6_6.2+dfs 100% |*******************************|   143k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

login_1%3a4.1.5.1-1_   0% |                               |     0  --:--:-- ETA
login_1%3a4.1.5.1-1_  53% |****************               |   505k 00:00:03 ETA
login_1%3a4.1.5.1-1_ 100% |*******************************|   952k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libslang2_2.2.4-15_a   0% |                               |     0  --:--:-- ETA
libslang2_2.2.4-15_a 100% |*******************************|   510k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

initscripts_2.88dsf-   0% |                               |     0  --:--:-- ETA
initscripts_2.88dsf- 100% |*******************************| 91366  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libwrap0_7.6.q-24_ar   0% |                               |     0  --:--:-- ETA
libwrap0_7.6.q-24_ar 100% |*******************************| 59680  00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libudev0_175-7.2_arm   0% |                               |     0  --:--:-- ETA
libudev0_175-7.2_arm 100% |*******************************|   121k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libustr-1.0-1_1.0.4-   0% |                               |     0  --:--:-- ETA
libustr-1.0-1_1.0.4- 100% |*******************************| 72596  00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

bsdutils_1%3a2.20.1-   0% |                               |     0  --:--:-- ETA
bsdutils_1%3a2.20.1- 100% |*******************************| 91990  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libblkid1_2.20.1-5.3   0% |                               |     0  --:--:-- ETA
libblkid1_2.20.1-5.3 100% |*******************************|   117k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libmount1_2.20.1-5.3   0% |                               |     0  --:--:-- ETA
libmount1_2.20.1-5.3 100% |*******************************|   109k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

libuuid1_2.20.1-5.3_   0% |                               |     0  --:--:-- ETA
libuuid1_2.20.1-5.3_ 100% |*******************************| 57774  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

mount_2.20.1-5.3_arm   0% |                               |     0  --:--:-- ETA
mount_2.20.1-5.3_arm 100% |*******************************|   209k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

liblzma5_5.1.1alpha+   0% |                               |     0  --:--:-- ETA
liblzma5_5.1.1alpha+ 100% |*******************************|   194k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

net-tools_1.60-24.2_   0% |                               |     0  --:--:-- ETA
net-tools_1.60-24.2_ 100% |*******************************|   323k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

netbase_5.0_all.deb    0% |                               |     0  --:--:-- ETA
netbase_5.0_all.deb  100% |*******************************| 20072  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

ntpdate_1%3a4.2.6.p5   0% |                               |     0  --:--:-- ETA
ntpdate_1%3a4.2.6.p5 100% |*******************************| 80724  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

openssh-client_1%3a6   0% |                               |     0  --:--:-- ETA
openssh-client_1%3a6  56% |*****************              |   532k 00:00:00 ETA
openssh-client_1%3a6 100% |*******************************|   938k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

openssh-server_1%3a6   0% |                               |     0  --:--:-- ETA
openssh-server_1%3a6 100% |*******************************|   308k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

perl-base_5.14.2-21_   0% |                               |     0  --:--:-- ETA
perl-base_5.14.2-21_  36% |***********                    |   531k 00:00:01 ETA
perl-base_5.14.2-21_  80% |************************       |  1157k 00:00:00 ETA
perl-base_5.14.2-21_ 100% |*******************************|  1446k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

procps_1%3a3.3.3-3_a   0% |                               |     0  --:--:-- ETA
procps_1%3a3.3.3-3_a 100% |*******************************|   253k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

readline-common_6.2+   0% |                               |     0  --:--:-- ETA
readline-common_6.2+ 100% |*******************************| 31864  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

sed_4.2.1-10_armel.d   0% |                               |     0  --:--:-- ETA
sed_4.2.1-10_armel.d 100% |*******************************|   242k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

sensible-utils_0.0.7   0% |                               |     0  --:--:-- ETA
sensible-utils_0.0.7 100% |*******************************|  8850  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

passwd_1%3a4.1.5.1-1   0% |                               |     0  --:--:-- ETA
passwd_1%3a4.1.5.1-1  46% |**************                 |   541k 00:00:01 ETA
passwd_1%3a4.1.5.1-1 100% |*******************************|  1151k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

sysv-rc_2.88dsf-41_a   0% |                               |     0  --:--:-- ETA
sysv-rc_2.88dsf-41_a 100% |*******************************| 81390  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

sysvinit_2.88dsf-41_   0% |                               |     0  --:--:-- ETA
sysvinit_2.88dsf-41_ 100% |*******************************|   127k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

sysvinit-utils_2.88d   0% |                               |     0  --:--:-- ETA
sysvinit-utils_2.88d 100% |*******************************|    97k --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

tar_1.26+dfsg-0.1_ar   0% |                               |     0  --:--:-- ETA
tar_1.26+dfsg-0.1_ar  56% |*****************              |   539k 00:00:00 ETA
tar_1.26+dfsg-0.1_ar 100% |*******************************|   947k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

tzdata_2013c-0wheezy   0% |                               |     0  --:--:-- ETA
tzdata_2013c-0wheezy  97% |****************************** |   497k 00:00:00 ETA
tzdata_2013c-0wheezy 100% |*******************************|   512k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

u-boot-tools_2012.04   0% |                               |     0  --:--:-- ETA
u-boot-tools_2012.04 100% |*******************************| 58150  --:--:-- ETA
Connecting to cdn.debian.net (195.71.68.86:80)

udev_175-7.2_armel.d   0% |                               |     0  --:--:-- ETA
udev_175-7.2_armel.d 100% |*******************************|   353k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

util-linux_2.20.1-5.   0% |                               |     0  --:--:-- ETA
util-linux_2.20.1-5.  81% |*************************      |   534k 00:00:00 ETA
util-linux_2.20.1-5. 100% |*******************************|   653k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

vim-common_2%3a7.3.5   0% |                               |     0  --:--:-- ETA
vim-common_2%3a7.3.5 100% |*******************************|   158k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

vim-tiny_2%3a7.3.547   0% |                               |     0  --:--:-- ETA
vim-tiny_2%3a7.3.547 100% |*******************************|   273k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

wget_1.13.4-3_armel.   0% |                               |     0  --:--:-- ETA
wget_1.13.4-3_armel.  72% |**********************         |   538k 00:00:00 ETA
wget_1.13.4-3_armel.  86% |**************************     |   636k 00:00:00 ETA
wget_1.13.4-3_armel. 100% |*******************************|   737k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

xz-utils_5.1.1alpha+   0% |                               |     0  --:--:-- ETA
xz-utils_5.1.1alpha+ 100% |*******************************|   233k 00:00:00 ETA
Connecting to cdn.debian.net (195.71.68.86:80)

zlib1g_1%3a1.2.7.dfs   0% |                               |     0  --:--:-- ETA
zlib1g_1%3a1.2.7.dfs 100% |*******************************| 87460  --:--:-- ETA
dpkg: warning: parsing file '/var/lib/dpkg/status' near line 5 package 'dpkg':
 missing description
dpkg: warning: parsing file '/var/lib/dpkg/status' near line 5 package 'dpkg':
 missing architecture
Selecting previously unselected package base-files.
dpkg: regarding .../base-files_7.1wheezy1_armel.deb containing base-files, pre-dependency problem:
 base-files pre-depends on awk
  awk is not installed.

dpkg: warning: ignoring pre-dependency problem!
(Reading database ... 0 files and directories currently installed.)
Unpacking base-files (from .../base-files_7.1wheezy1_armel.deb) ...
Selecting previously unselected package base-passwd.
Unpacking base-passwd (from .../base-passwd_3.5.26_armel.deb) ...
dpkg: base-passwd: dependency problems, but configuring anyway as you requested:
 base-passwd depends on libc6 (>= 2.8); however:
  Package libc6 is not installed.

Setting up base-passwd (3.5.26) ...
dpkg: base-files: dependency problems, but configuring anyway as you requested:
 base-files depends on awk; however:
  Package awk is not installed.

Setting up base-files (7.1wheezy1) ...
dpkg: warning: parsing file '/var/lib/dpkg/status' near line 50 package 'dpkg':
 missing description
dpkg: warning: parsing file '/var/lib/dpkg/status' near line 50 package 'dpkg':
 missing architecture
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on libbz2-1.0
  libbz2-1.0 is not installed.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on libc6 (>= 2.11)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on libgcc1 (>= 1:4.4.0)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on liblzma5 (>= 5.1.1alpha+20120614)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on libselinux1 (>= 1.32)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on zlib1g (>= 1:1.1.4)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on tar (>= 1.23)

dpkg: warning: ignoring pre-dependency problem!
(Reading database ... 115 files and directories currently installed.)
Preparing to replace dpkg 1.16.10 (using .../dpkg_1.16.10_armel.deb) ...
Unpacking replacement dpkg ...
dpkg: dpkg: dependency problems, but configuring anyway as you requested:
 dpkg depends on libbz2-1.0; however:
  Package libbz2-1.0 is not installed.
 dpkg depends on libc6 (>= 2.11); however:
  Package libc6 is not installed.
 dpkg depends on libgcc1 (>= 1:4.4.0); however:
  Package libgcc1 is not installed.
 dpkg depends on liblzma5 (>= 5.1.1alpha+20120614); however:
  Package liblzma5 is not installed.
 dpkg depends on libselinux1 (>= 1.32); however:
  Package libselinux1 is not installed.
 dpkg depends on zlib1g (>= 1:1.1.4); however:
  Package zlib1g is not installed.
 dpkg depends on tar (>= 1.23); however:
  Package tar is not installed.

Setting up dpkg (1.16.10) ...
Selecting previously unselected package libc6:armel.
(Reading database ... 371 files and directories currently installed.)
Unpacking libc6:armel (from .../libc6_2.13-38_armel.deb) ...
dpkg: libc6:armel: dependency problems, but configuring anyway as you requested:
 libc6:armel depends on libc-bin (= 2.13-38); however:
  Package libc-bin is not installed.
 libc6:armel depends on libgcc1; however:
  Package libgcc1 is not installed.

Setting up libc6:armel (2.13-38) ...
Selecting previously unselected package perl-base.
dpkg: regarding .../perl-base_5.14.2-21_armel.deb containing perl-base, pre-dependency problem:
 perl-base pre-depends on libgcc1 (>= 1:4.4.0)

dpkg: warning: ignoring pre-dependency problem!
(Reading database ... 681 files and directories currently installed.)
Unpacking perl-base (from .../perl-base_5.14.2-21_armel.deb) ...
dpkg: perl-base: dependency problems, but configuring anyway as you requested:
 perl-base depends on libgcc1 (>= 1:4.4.0); however:
  Package libgcc1 is not installed.

Setting up perl-base (5.14.2-21) ...
Selecting previously unselected package mawk.
(Reading database ... 1751 files and directories currently installed.)
Unpacking mawk (from .../mawk_1.3.3-17_armel.deb) ...
Setting up mawk (1.3.3-17) ...
Selecting previously unselected package libacl1:armel.
dpkg: regarding .../libacl1_2.2.51-8_armel.deb containing libacl1:armel, pre-dependency problem:
 libacl1 pre-depends on multiarch-support
  multiarch-support is not installed.

dpkg: warning: ignoring pre-dependency problem!
(Reading database ... 1770 files and directories currently installed.)
Unpacking libacl1:armel (from .../libacl1_2.2.51-8_armel.deb) ...
Selecting previously unselected package libattr1:armel.
dpkg: regarding .../libattr1_1%3a2.4.46-8_armel.deb containing libattr1:armel, pre-dependency problem:
 libattr1 pre-depends on multiarch-support
  multiarch-support is not installed.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libattr1:armel (from .../libattr1_1%3a2.4.46-8_armel.deb) ...
Preparing to replace base-files 7.1wheezy1 (using .../base-files_7.1wheezy1_armel.deb) ...
Unpacking replacement base-files ...
Preparing to replace base-passwd 3.5.26 (using .../base-passwd_3.5.26_armel.deb) ...
Unpacking replacement base-passwd ...
Selecting previously unselected package bash.
dpkg: regarding .../bash_4.2+dfsg-0.1_armel.deb containing bash, pre-dependency problem:
 bash pre-depends on dash (>= 0.5.5.1-2.2)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../bash_4.2+dfsg-0.1_armel.deb containing bash, pre-dependency problem:
 bash pre-depends on libgcc1 (>= 1:4.4.0)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../bash_4.2+dfsg-0.1_armel.deb containing bash, pre-dependency problem:
 bash pre-depends on libtinfo5
  libtinfo5 is not installed.

dpkg: warning: ignoring pre-dependency problem!
Unpacking bash (from .../bash_4.2+dfsg-0.1_armel.deb) ...
Selecting previously unselected package libbz2-1.0:armel.
dpkg: regarding .../libbz2-1.0_1.0.6-4_armel.deb containing libbz2-1.0:armel, pre-dependency problem:
 libbz2-1.0 pre-depends on multiarch-support
  multiarch-support is not installed.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libbz2-1.0:armel (from .../libbz2-1.0_1.0.6-4_armel.deb) ...
Selecting previously unselected package coreutils.
dpkg: regarding .../coreutils_8.13-3.5_armel.deb containing coreutils, pre-dependency problem:
 coreutils pre-depends on libacl1 (>= 2.2.51-8)
  libacl1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../coreutils_8.13-3.5_armel.deb containing coreutils, pre-dependency problem:
 coreutils pre-depends on libattr1 (>= 1:2.4.46-8)
  libattr1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../coreutils_8.13-3.5_armel.deb containing coreutils, pre-dependency problem:
 coreutils pre-depends on libgcc1 (>= 1:4.4.0)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../coreutils_8.13-3.5_armel.deb containing coreutils, pre-dependency problem:
 coreutils pre-depends on libselinux1 (>= 1.32)

dpkg: warning: ignoring pre-dependency problem!
Unpacking coreutils (from .../coreutils_8.13-3.5_armel.deb) ...
Selecting previously unselected package dash.
Unpacking dash (from .../dash_0.5.7-3_armel.deb) ...
Adding 'diversion of /bin/sh to /bin/sh.distrib by dash'
Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash'
Selecting previously unselected package libdb5.1:armel.
dpkg: regarding .../libdb5.1_5.1.29-5_armel.deb containing libdb5.1:armel, pre-dependency problem:
 libdb5.1 pre-depends on multiarch-support
  multiarch-support is not installed.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libdb5.1:armel (from .../libdb5.1_5.1.29-5_armel.deb) ...
Selecting previously unselected package debconf.
Unpacking debconf (from .../debconf_1.5.49_all.deb) ...
Selecting previously unselected package debconf-i18n.
Unpacking debconf-i18n (from .../debconf-i18n_1.5.49_all.deb) ...
Selecting previously unselected package debianutils.
Unpacking debianutils (from .../debianutils_4.3.2_armel.deb) ...
Selecting previously unselected package diffutils.
dpkg: regarding .../diffutils_1%3a3.2-6_armel.deb containing diffutils, pre-dependency problem:
 diffutils pre-depends on libgcc1 (>= 1:4.4.0)

dpkg: warning: ignoring pre-dependency problem!
Unpacking diffutils (from .../diffutils_1%3a3.2-6_armel.deb) ...
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on libbz2-1.0
  libbz2-1.0:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on libgcc1 (>= 1:4.4.0)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on liblzma5 (>= 5.1.1alpha+20120614)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on libselinux1 (>= 1.32)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on zlib1g (>= 1:1.1.4)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../dpkg_1.16.10_armel.deb containing dpkg, pre-dependency problem:
 dpkg pre-depends on tar (>= 1.23)

dpkg: warning: ignoring pre-dependency problem!
Preparing to replace dpkg 1.16.10 (using .../dpkg_1.16.10_armel.deb) ...
Unpacking replacement dpkg ...
Selecting previously unselected package e2fslibs:armel.
dpkg: regarding .../e2fslibs_1.42.5-1.1_armel.deb containing e2fslibs:armel, pre-dependency problem:
 e2fslibs pre-depends on multiarch-support
  multiarch-support is not installed.

dpkg: warning: ignoring pre-dependency problem!
Unpacking e2fslibs:armel (from .../e2fslibs_1.42.5-1.1_armel.deb) ...
Selecting previously unselected package e2fsprogs.
dpkg: regarding .../e2fsprogs_1.42.5-1.1_armel.deb containing e2fsprogs, pre-dependency problem:
 e2fsprogs pre-depends on e2fslibs (= 1.42.5-1.1)
  e2fslibs:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../e2fsprogs_1.42.5-1.1_armel.deb containing e2fsprogs, pre-dependency problem:
 e2fsprogs pre-depends on libblkid1 (>= 2.17.2)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../e2fsprogs_1.42.5-1.1_armel.deb containing e2fsprogs, pre-dependency problem:
 e2fsprogs pre-depends on libcomerr2 (>= 1.42~WIP-2011-10-05-1)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../e2fsprogs_1.42.5-1.1_armel.deb containing e2fsprogs, pre-dependency problem:
 e2fsprogs pre-depends on libgcc1 (>= 1:4.4.0)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../e2fsprogs_1.42.5-1.1_armel.deb containing e2fsprogs, pre-dependency problem:
 e2fsprogs pre-depends on libss2 (>= 1.34-1)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../e2fsprogs_1.42.5-1.1_armel.deb containing e2fsprogs, pre-dependency problem:
 e2fsprogs pre-depends on libuuid1 (>= 2.16)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../e2fsprogs_1.42.5-1.1_armel.deb containing e2fsprogs, pre-dependency problem:
 e2fsprogs pre-depends on util-linux (>= 2.15~rc1-1)

dpkg: warning: ignoring pre-dependency problem!
Unpacking e2fsprogs (from .../e2fsprogs_1.42.5-1.1_armel.deb) ...
Selecting previously unselected package libcomerr2:armel.
dpkg: regarding .../libcomerr2_1.42.5-1.1_armel.deb containing libcomerr2:armel, pre-dependency problem:
 libcomerr2 pre-depends on multiarch-support
  multiarch-support is not installed.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libcomerr2:armel (from .../libcomerr2_1.42.5-1.1_armel.deb) ...
Selecting previously unselected package libss2:armel.
dpkg: regarding .../libss2_1.42.5-1.1_armel.deb containing libss2:armel, pre-dependency problem:
 libss2 pre-depends on multiarch-support
  multiarch-support is not installed.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libss2:armel (from .../libss2_1.42.5-1.1_armel.deb) ...
Selecting previously unselected package libc-bin.
Unpacking libc-bin (from .../libc-bin_2.13-38_armel.deb) ...
Preparing to replace libc6:armel 2.13-38 (using .../libc6_2.13-38_armel.deb) ...
Unpacking replacement libc6:armel ...
Selecting previously unselected package multiarch-support.
Unpacking multiarch-support (from .../multiarch-support_2.13-38_armel.deb) ...
Selecting previously unselected package findutils.
dpkg: regarding .../findutils_4.4.2-4_armel.deb containing findutils, pre-dependency problem:
 findutils pre-depends on libgcc1 (>= 1:4.4.0)

dpkg: warning: ignoring pre-dependency problem!
Unpacking findutils (from .../findutils_4.4.2-4_armel.deb) ...
Selecting previously unselected package gcc-4.7-base:armel.
Unpacking gcc-4.7-base:armel (from .../gcc-4.7-base_4.7.2-5_armel.deb) ...
Selecting previously unselected package libgcc1:armel.
dpkg: regarding .../libgcc1_1%3a4.7.2-5_armel.deb containing libgcc1:armel, pre-dependency problem:
 libgcc1 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libgcc1:armel (from .../libgcc1_1%3a4.7.2-5_armel.deb) ...
Selecting previously unselected package grep.
dpkg: regarding .../archives/grep_2.12-2_armel.deb containing grep, pre-dependency problem:
 grep pre-depends on libgcc1 (>= 1:4.4.0)
  libgcc1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking grep (from .../archives/grep_2.12-2_armel.deb) ...
Selecting previously unselected package gzip.
dpkg: regarding .../gzip_1.5-1.1_armel.deb containing gzip, pre-dependency problem:
 gzip pre-depends on libgcc1 (>= 1:4.4.0)
  libgcc1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking gzip (from .../gzip_1.5-1.1_armel.deb) ...
Selecting previously unselected package hostname.
Unpacking hostname (from .../hostname_3.11_armel.deb) ...
Selecting previously unselected package insserv.
Unpacking insserv (from .../insserv_1.14.0-5_armel.deb) ...
Selecting previously unselected package liblocale-gettext-perl.
Unpacking liblocale-gettext-perl (from .../liblocale-gettext-perl_1.05-7+b1_armel.deb) ...
Selecting previously unselected package libselinux1:armel.
dpkg: regarding .../libselinux1_2.1.9-5_armel.deb containing libselinux1:armel, pre-dependency problem:
 libselinux1 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libselinux1:armel (from .../libselinux1_2.1.9-5_armel.deb) ...
Selecting previously unselected package libsemanage-common.
Unpacking libsemanage-common (from .../libsemanage-common_2.1.6-6_all.deb) ...
Selecting previously unselected package libsemanage1:armel.
dpkg: regarding .../libsemanage1_2.1.6-6_armel.deb containing libsemanage1:armel, pre-dependency problem:
 libsemanage1 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libsemanage1:armel (from .../libsemanage1_2.1.6-6_armel.deb) ...
Selecting previously unselected package libsepol1:armel.
dpkg: regarding .../libsepol1_2.1.4-3_armel.deb containing libsepol1:armel, pre-dependency problem:
 libsepol1 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libsepol1:armel (from .../libsepol1_2.1.4-3_armel.deb) ...
Selecting previously unselected package libtext-charwidth-perl.
Unpacking libtext-charwidth-perl (from .../libtext-charwidth-perl_0.04-7+b1_armel.deb) ...
Selecting previously unselected package libtext-iconv-perl.
Unpacking libtext-iconv-perl (from .../libtext-iconv-perl_1.7-5_armel.deb) ...
Selecting previously unselected package libtext-wrapi18n-perl.
Unpacking libtext-wrapi18n-perl (from .../libtext-wrapi18n-perl_0.06-7_all.deb) ...
Selecting previously unselected package lsb-base.
Unpacking lsb-base (from .../lsb-base_4.1+Debian8+deb7u1_all.deb) ...
Preparing to replace mawk 1.3.3-17 (using .../mawk_1.3.3-17_armel.deb) ...
Unpacking replacement mawk ...
Selecting previously unselected package libncurses5:armel.
dpkg: regarding .../libncurses5_5.9-10_armel.deb containing libncurses5:armel, pre-dependency problem:
 libncurses5 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../libncurses5_5.9-10_armel.deb containing libncurses5:armel, pre-dependency problem:
 libncurses5 pre-depends on libtinfo5 (>= 5.9-3)

dpkg: warning: ignoring pre-dependency problem!
Unpacking libncurses5:armel (from .../libncurses5_5.9-10_armel.deb) ...
Selecting previously unselected package libtinfo5:armel.
dpkg: regarding .../libtinfo5_5.9-10_armel.deb containing libtinfo5:armel, pre-dependency problem:
 libtinfo5 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libtinfo5:armel (from .../libtinfo5_5.9-10_armel.deb) ...
Selecting previously unselected package ncurses-base.
Unpacking ncurses-base (from .../ncurses-base_5.9-10_all.deb) ...
Selecting previously unselected package ncurses-bin.
dpkg: regarding .../ncurses-bin_5.9-10_armel.deb containing ncurses-bin, pre-dependency problem:
 ncurses-bin pre-depends on libtinfo5 (>= 5.9-3~)
  libtinfo5:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking ncurses-bin (from .../ncurses-bin_5.9-10_armel.deb) ...
Selecting previously unselected package libpam-modules:armel.
dpkg: regarding .../libpam-modules_1.1.3-7.1_armel.deb containing libpam-modules:armel, pre-dependency problem:
 libpam-modules pre-depends on libdb5.1
  libdb5.1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../libpam-modules_1.1.3-7.1_armel.deb containing libpam-modules:armel, pre-dependency problem:
 libpam-modules pre-depends on libpam0g (>= 1.1.3-2)

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../libpam-modules_1.1.3-7.1_armel.deb containing libpam-modules:armel, pre-dependency problem:
 libpam-modules pre-depends on libselinux1 (>= 2.0.85)
  libselinux1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../libpam-modules_1.1.3-7.1_armel.deb containing libpam-modules:armel, pre-dependency problem:
 libpam-modules pre-depends on debconf (>= 0.5) | debconf-2.0
  debconf is unpacked, but has never been configured.
  debconf provides debconf-2.0 but is unpacked but not configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../libpam-modules_1.1.3-7.1_armel.deb containing libpam-modules:armel, pre-dependency problem:
 libpam-modules pre-depends on libpam-modules-bin (= 1.1.3-7.1)

dpkg: warning: ignoring pre-dependency problem!
Unpacking libpam-modules:armel (from .../libpam-modules_1.1.3-7.1_armel.deb) ...
Selecting previously unselected package libpam-modules-bin.
Unpacking libpam-modules-bin (from .../libpam-modules-bin_1.1.3-7.1_armel.deb) ...
Selecting previously unselected package libpam-runtime.
Unpacking libpam-runtime (from .../libpam-runtime_1.1.3-7.1_all.deb) ...
Selecting previously unselected package libpam0g:armel.
dpkg: regarding .../libpam0g_1.1.3-7.1_armel.deb containing libpam0g:armel, pre-dependency problem:
 libpam0g pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libpam0g:armel (from .../libpam0g_1.1.3-7.1_armel.deb) ...
Selecting previously unselected package login.
dpkg: regarding .../login_1%3a4.1.5.1-1_armel.deb containing login, pre-dependency problem:
 login pre-depends on libgcc1 (>= 1:4.4.0)
  libgcc1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../login_1%3a4.1.5.1-1_armel.deb containing login, pre-dependency problem:
 login pre-depends on libpam0g (>= 0.99.7.1)
  libpam0g:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../login_1%3a4.1.5.1-1_armel.deb containing login, pre-dependency problem:
 login pre-depends on libpam-runtime
  libpam-runtime is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../login_1%3a4.1.5.1-1_armel.deb containing login, pre-dependency problem:
 login pre-depends on libpam-modules
  libpam-modules:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking login (from .../login_1%3a4.1.5.1-1_armel.deb) ...
Selecting previously unselected package libslang2:armel.
dpkg: regarding .../libslang2_2.2.4-15_armel.deb containing libslang2:armel, pre-dependency problem:
 libslang2 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libslang2:armel (from .../libslang2_2.2.4-15_armel.deb) ...
Selecting previously unselected package initscripts.
Unpacking initscripts (from .../initscripts_2.88dsf-41_armel.deb) ...
Selecting previously unselected package libustr-1.0-1:armel.
dpkg: regarding .../libustr-1.0-1_1.0.4-3_armel.deb containing libustr-1.0-1:armel, pre-dependency problem:
 libustr-1.0-1 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libustr-1.0-1:armel (from .../libustr-1.0-1_1.0.4-3_armel.deb) ...
Selecting previously unselected package bsdutils.
Unpacking bsdutils (from .../bsdutils_1%3a2.20.1-5.3_armel.deb) ...
Selecting previously unselected package libblkid1:armel.
dpkg: regarding .../libblkid1_2.20.1-5.3_armel.deb containing libblkid1:armel, pre-dependency problem:
 libblkid1 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libblkid1:armel (from .../libblkid1_2.20.1-5.3_armel.deb) ...
Selecting previously unselected package libmount1.
dpkg: regarding .../libmount1_2.20.1-5.3_armel.deb containing libmount1, pre-dependency problem:
 libmount1 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libmount1 (from .../libmount1_2.20.1-5.3_armel.deb) ...
Selecting previously unselected package libuuid1:armel.
dpkg: regarding .../libuuid1_2.20.1-5.3_armel.deb containing libuuid1:armel, pre-dependency problem:
 libuuid1 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking libuuid1:armel (from .../libuuid1_2.20.1-5.3_armel.deb) ...
Selecting previously unselected package mount.
dpkg: regarding .../mount_2.20.1-5.3_armel.deb containing mount, pre-dependency problem:
 mount pre-depends on libblkid1 (>= 2.20.1)
  libblkid1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../mount_2.20.1-5.3_armel.deb containing mount, pre-dependency problem:
 mount pre-depends on libgcc1 (>= 1:4.4.0)
  libgcc1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../mount_2.20.1-5.3_armel.deb containing mount, pre-dependency problem:
 mount pre-depends on libmount1 (>= 2.20.1)
  libmount1 is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../mount_2.20.1-5.3_armel.deb containing mount, pre-dependency problem:
 mount pre-depends on libselinux1 (>= 2.0.15)
  libselinux1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../mount_2.20.1-5.3_armel.deb containing mount, pre-dependency problem:
 mount pre-depends on libsepol1 (>= 1.14)
  libsepol1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking mount (from .../mount_2.20.1-5.3_armel.deb) ...
Selecting previously unselected package liblzma5:armel.
dpkg: regarding .../liblzma5_5.1.1alpha+20120614-2_armel.deb containing liblzma5:armel, pre-dependency problem:
 liblzma5 pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking liblzma5:armel (from .../liblzma5_5.1.1alpha+20120614-2_armel.deb) ...
dpkg: regarding .../perl-base_5.14.2-21_armel.deb containing perl-base, pre-dependency problem:
 perl-base pre-depends on libgcc1 (>= 1:4.4.0)
  libgcc1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Preparing to replace perl-base 5.14.2-21 (using .../perl-base_5.14.2-21_armel.deb) ...
Unpacking replacement perl-base ...
Selecting previously unselected package sed.
dpkg: regarding .../sed_4.2.1-10_armel.deb containing sed, pre-dependency problem:
 sed pre-depends on libselinux1 (>= 1.32)
  libselinux1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking sed (from .../sed_4.2.1-10_armel.deb) ...
Selecting previously unselected package sensible-utils.
Unpacking sensible-utils (from .../sensible-utils_0.0.7_all.deb) ...
Selecting previously unselected package passwd.
Unpacking passwd (from .../passwd_1%3a4.1.5.1-1_armel.deb) ...
Selecting previously unselected package sysv-rc.
Unpacking sysv-rc (from .../sysv-rc_2.88dsf-41_all.deb) ...
Selecting previously unselected package sysvinit.
dpkg: regarding .../sysvinit_2.88dsf-41_armel.deb containing sysvinit, pre-dependency problem:
 sysvinit pre-depends on initscripts (>= 2.88dsf-13.3)
  initscripts is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../sysvinit_2.88dsf-41_armel.deb containing sysvinit, pre-dependency problem:
 sysvinit pre-depends on sysv-rc | file-rc
  sysv-rc is unpacked, but has never been configured.
  file-rc is not installed.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../sysvinit_2.88dsf-41_armel.deb containing sysvinit, pre-dependency problem:
 sysvinit pre-depends on sysvinit-utils (>= 2.86.ds1-66)

dpkg: warning: ignoring pre-dependency problem!
Unpacking sysvinit (from .../sysvinit_2.88dsf-41_armel.deb) ...
Selecting previously unselected package sysvinit-utils.
Unpacking sysvinit-utils (from .../sysvinit-utils_2.88dsf-41_armel.deb) ...
Selecting previously unselected package tar.
dpkg: regarding .../tar_1.26+dfsg-0.1_armel.deb containing tar, pre-dependency problem:
 tar pre-depends on libgcc1 (>= 1:4.4.0)
  libgcc1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking tar (from .../tar_1.26+dfsg-0.1_armel.deb) ...
Selecting previously unselected package tzdata.
Unpacking tzdata (from .../tzdata_2013c-0wheezy1_all.deb) ...
Selecting previously unselected package util-linux.
dpkg: regarding .../util-linux_2.20.1-5.3_armel.deb containing util-linux, pre-dependency problem:
 util-linux pre-depends on libblkid1 (>= 2.20.1)
  libblkid1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../util-linux_2.20.1-5.3_armel.deb containing util-linux, pre-dependency problem:
 util-linux pre-depends on libgcc1 (>= 1:4.4.0)
  libgcc1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../util-linux_2.20.1-5.3_armel.deb containing util-linux, pre-dependency problem:
 util-linux pre-depends on libncurses5 (>= 5.5-5~)
  libncurses5:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../util-linux_2.20.1-5.3_armel.deb containing util-linux, pre-dependency problem:
 util-linux pre-depends on libselinux1 (>= 1.32)
  libselinux1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../util-linux_2.20.1-5.3_armel.deb containing util-linux, pre-dependency problem:
 util-linux pre-depends on libslang2 (>= 2.2.4)
  libslang2:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../util-linux_2.20.1-5.3_armel.deb containing util-linux, pre-dependency problem:
 util-linux pre-depends on libtinfo5
  libtinfo5:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../util-linux_2.20.1-5.3_armel.deb containing util-linux, pre-dependency problem:
 util-linux pre-depends on libuuid1 (>= 2.16)
  libuuid1:armel is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
dpkg: regarding .../util-linux_2.20.1-5.3_armel.deb containing util-linux, pre-dependency problem:
 util-linux pre-depends on zlib1g (>= 1:1.1.4)

dpkg: warning: ignoring pre-dependency problem!
Unpacking util-linux (from .../util-linux_2.20.1-5.3_armel.deb) ...
Selecting previously unselected package xz-utils.
Unpacking xz-utils (from .../xz-utils_5.1.1alpha+20120614-2_armel.deb) ...
Selecting previously unselected package zlib1g:armel.
dpkg: regarding .../zlib1g_1%3a1.2.7.dfsg-13_armel.deb containing zlib1g:armel, pre-dependency problem:
 zlib1g pre-depends on multiarch-support
  multiarch-support is unpacked, but has never been configured.

dpkg: warning: ignoring pre-dependency problem!
Unpacking zlib1g:armel (from .../zlib1g_1%3a1.2.7.dfsg-13_armel.deb) ...
Setting up lsb-base (4.1+Debian8+deb7u1) ...
Setting up ncurses-base (5.9-10) ...
Setting up sensible-utils (0.0.7) ...
Setting up libsemanage-common (2.1.6-6) ...
Setting up gcc-4.7-base:armel (4.7.2-5) ...
Setting up libc-bin (2.13-38) ...
Setting up libc6:armel (2.13-38) ...
Setting up debianutils (4.3.2) ...
Setting up base-passwd (3.5.26) ...
Setting up mawk (1.3.3-17) ...
Setting up hostname (3.11) ...
Setting up insserv (1.14.0-5) ...
Setting up multiarch-support (2.13-38) ...
Setting up libselinux1:armel (2.1.9-5) ...
Setting up libsepol1:armel (2.1.4-3) ...
Setting up libgcc1:armel (1:4.7.2-5) ...
Setting up base-files (7.1wheezy1) ...
Setting up libattr1:armel (1:2.4.46-8) ...
Setting up e2fslibs:armel (1.42.5-1.1) ...
Setting up libcomerr2:armel (1.42.5-1.1) ...
Setting up libacl1:armel (2.2.51-8) ...
Setting up libslang2:armel (2.2.4-15) ...
Setting up libss2:armel (1.42.5-1.1) ...
Setting up liblzma5:armel (5.1.1alpha+20120614-2) ...
Setting up libdb5.1:armel (5.1.29-5) ...
Setting up libbz2-1.0:armel (1.0.6-4) ...
Setting up libtinfo5:armel (5.9-10) ...
Setting up sysvinit-utils (2.88dsf-41) ...
Setting up libustr-1.0-1:armel (1.0.4-3) ...
Setting up bsdutils (1:2.20.1-5.3) ...
Setting up ncurses-bin (5.9-10) ...
Setting up libsemanage1:armel (2.1.6-6) ...
Setting up tar (1.26+dfsg-0.1) ...
update-alternatives: using /usr/sbin/rmt-tar to provide /usr/sbin/rmt (rmt) in auto mode
Setting up zlib1g:armel (1:1.2.7.dfsg-13) ...
Setting up libncurses5:armel (5.9-10) ...
Setting up xz-utils (5.1.1alpha+20120614-2) ...
update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode
Setting up dpkg (1.16.10) ...
Setting up dash (0.5.7-3) ...
Setting up coreutils (8.13-3.5) ...
Setting up perl-base (5.14.2-21) ...
Setting up diffutils (1:3.2-6) ...
Setting up libtext-iconv-perl (1.7-5) ...
Setting up sed (4.2.1-10) ...
Setting up grep (2.12-2) ...
Setting up findutils (4.4.2-4) ...
Setting up gzip (1.5-1.1) ...
Setting up liblocale-gettext-perl (1.05-7+b1) ...
Setting up bash (4.2+dfsg-0.1) ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
Setting up libtext-charwidth-perl (0.04-7+b1) ...
Setting up libtext-wrapi18n-perl (0.06-7) ...
Setting up debconf (1.5.49) ...
Setting up libpam0g:armel (1.1.3-7.1) ...
Setting up sysv-rc (2.88dsf-41) ...
Setting up tzdata (2013c-0wheezy1) ...

Current default time zone: 'Etc/UTC'
Local time is now:      Sun Aug 18 11:35:44 UTC 2013.
Universal Time is now:  Sun Aug 18 11:35:44 UTC 2013.
Run 'dpkg-reconfigure tzdata' if you wish to change it.

Setting up debconf-i18n (1.5.49) ...
Setting up initscripts (2.88dsf-41) ...
guest environment detected: Linking /dev/shm to /run/shm
invoke-rc.d: policy-rc.d denied execution of start.
Setting up libpam-modules-bin (1.1.3-7.1) ...
Setting up libpam-modules:armel (1.1.3-7.1) ...
Setting up passwd (1:4.1.5.1-1) ...
Shadow passwords are now on.
Setting up libpam-runtime (1.1.3-7.1) ...
Setting up sysvinit (2.88dsf-41) ...
Not restarting sysvinit
Setting up login (1:4.1.5.1-1) ...
Setting up libuuid1:armel (2.20.1-5.3) ...
Setting up libblkid1:armel (2.20.1-5.3) ...
Setting up util-linux (2.20.1-5.3) ...
update-alternatives: using /bin/more to provide /usr/bin/pager (pager) in auto mode
Setting up libmount1 (2.20.1-5.3) ...
Setting up mount (2.20.1-5.3) ...
Setting up e2fsprogs (1.42.5-1.1) ...
(Reading database ... 6266 files and directories currently installed.)
Unpacking adduser (from .../adduser_3.113+nmu3_all.deb) ...
Unpacking apt (from .../archives/apt_0.9.7.9_armel.deb) ...
Unpacking libapt-pkg4.12:armel (from .../libapt-pkg4.12_0.9.7.9_armel.deb) ...
Unpacking cpio (from .../cpio_2.11+dfsg-0.1_armel.deb) ...
Unpacking debian-archive-keyring (from .../debian-archive-keyring_2012.4_all.deb) ...
Unpacking devio (from .../devio_1.2-1+b1_armel.deb) ...
Unpacking dhcpcd (from .../dhcpcd_1%3a3.2.3-11_armel.deb) ...
Unpacking dialog (from .../dialog_1.1-20120215-2_armel.deb) ...
Unpacking flash-kernel (from .../flash-kernel_3.3_armel.deb) ...
Unpacking libstdc++6:armel (from .../libstdc++6_4.7.2-5_armel.deb) ...
Unpacking gnupg (from .../gnupg_1.4.12-7_armel.deb) ...
Unpacking gpgv (from .../gpgv_1.4.12-7_armel.deb) ...
Unpacking libgnutls26:armel (from .../libgnutls26_2.12.20-7_armel.deb) ...
Unpacking ifupdown (from .../ifupdown_0.7.8_armel.deb) ...
Unpacking initramfs-tools (from .../initramfs-tools_0.109.1_all.deb) ...
Unpacking iproute (from .../iproute_20120521-3+b3_armel.deb) ...
Unpacking iputils-ping (from .../iputils-ping_3%3a20101006-1+b1_armel.deb) ...
Unpacking libkeyutils1:armel (from .../libkeyutils1_1.5.5-3_armel.deb) ...
Unpacking klibc-utils (from .../klibc-utils_2.0.1-3.1_armel.deb) ...
Unpacking libklibc (from .../libklibc_2.0.1-3.1_armel.deb) ...
Unpacking kmod (from .../archives/kmod_9-3_armel.deb) ...
Unpacking libkmod2:armel (from .../libkmod2_9-3_armel.deb) ...
Unpacking libgssapi-krb5-2:armel (from .../libgssapi-krb5-2_1.10.1+dfsg-5_armel.deb) ...
Unpacking libk5crypto3:armel (from .../libk5crypto3_1.10.1+dfsg-5_armel.deb) ...
Unpacking libkrb5-3:armel (from .../libkrb5-3_1.10.1+dfsg-5_armel.deb) ...
Unpacking libkrb5support0:armel (from .../libkrb5support0_1.10.1+dfsg-5_armel.deb) ...
Unpacking libbsd0:armel (from .../libbsd0_0.4.2-1_armel.deb) ...
Unpacking libedit2:armel (from .../libedit2_2.11-20080614-5_armel.deb) ...
Unpacking libgcrypt11:armel (from .../libgcrypt11_1.5.0-5_armel.deb) ...
Unpacking libgpg-error0:armel (from .../libgpg-error0_1.10-3.1_armel.deb) ...
Unpacking libidn11:armel (from .../libidn11_1.25-2_armel.deb) ...
Unpacking libtasn1-3:armel (from .../libtasn1-3_2.13-2_armel.deb) ...
Unpacking libusb-0.1-4:armel (from .../libusb-0.1-4_2%3a0.1.12-20+nmu1_armel.deb) ...
Unpacking libuuid-perl (from .../libuuid-perl_0.02-5_armel.deb) ...
Unpacking linux-image-3.2.0-4-kirkwood (from .../linux-image-3.2.0-4-kirkwood_3.2.46-1_armel.deb) ...
Unpacking linux-base (from .../linux-base_3.5_all.deb) ...
Unpacking linux-image-kirkwood (from .../linux-image-kirkwood_3.2+46_armel.deb) ...
Unpacking libncursesw5:armel (from .../libncursesw5_5.9-10_armel.deb) ...
Unpacking libssl1.0.0:armel (from .../libssl1.0.0_1.0.1e-2_armel.deb) ...
Unpacking libp11-kit0:armel (from .../libp11-kit0_0.12-3_armel.deb) ...
Unpacking libprocps0:armel (from .../libprocps0_1%3a3.3.3-3_armel.deb) ...
Unpacking libreadline6:armel (from .../libreadline6_6.2+dfsg-0.1_armel.deb) ...
Unpacking libwrap0:armel (from .../libwrap0_7.6.q-24_armel.deb) ...
Unpacking libudev0:armel (from .../libudev0_175-7.2_armel.deb) ...
Unpacking net-tools (from .../net-tools_1.60-24.2_armel.deb) ...
Unpacking netbase (from .../archives/netbase_5.0_all.deb) ...
Unpacking ntpdate (from .../ntpdate_1%3a4.2.6.p5+dfsg-2_armel.deb) ...
Unpacking openssh-client (from .../openssh-client_1%3a6.0p1-4_armel.deb) ...
Unpacking openssh-server (from .../openssh-server_1%3a6.0p1-4_armel.deb) ...
Unpacking procps (from .../procps_1%3a3.3.3-3_armel.deb) ...
Unpacking readline-common (from .../readline-common_6.2+dfsg-0.1_all.deb) ...
Unpacking u-boot-tools (from .../u-boot-tools_2012.04.01-2_armel.deb) ...
Unpacking udev (from .../udev_175-7.2_armel.deb) ...
Unpacking vim-common (from .../vim-common_2%3a7.3.547-7_armel.deb) ...
Unpacking vim-tiny (from .../vim-tiny_2%3a7.3.547-7_armel.deb) ...
Unpacking wget (from .../wget_1.13.4-3_armel.deb) ...
Setting up gpgv (1.4.12-7) ...
Setting up libssl1.0.0:armel (1.0.1e-2) ...
Setting up libtasn1-3:armel (2.13-2) ...
Setting up libusb-0.1-4:armel (2:0.1.12-20+nmu1) ...
Setting up libgpg-error0:armel (1.10-3.1) ...
Setting up vim-common (2:7.3.547-7) ...
Setting up u-boot-tools (2012.04.01-2) ...
Setting up libprocps0:armel (1:3.3.3-3) ...
Setting up netbase (5.0) ...
Setting up libudev0:armel (175-7.2) ...
Setting up libkmod2:armel (9-3) ...
Setting up adduser (3.113+nmu3) ...
Setting up libklibc (2.0.1-3.1) ...
Setting up libuuid-perl (0.02-5) ...
Setting up libkeyutils1:armel (1.5.5-3) ...
Setting up iproute (20120521-3+b3) ...
Setting up libidn11:armel (1.25-2) ...
Setting up devio (1.2-1+b1) ...
Setting up klibc-utils (2.0.1-3.1) ...
Setting up libkrb5support0:armel (1.10.1+dfsg-5) ...
Setting up net-tools (1.60-24.2) ...
Setting up libbsd0:armel (0.4.2-1) ...
Setting up debian-archive-keyring (2012.4) ...
Setting up linux-base (3.5) ...
Setting up libncursesw5:armel (5.9-10) ...
Setting up dialog (1.1-20120215-2) ...
Setting up iputils-ping (3:20101006-1+b1) ...
Setting up libedit2:armel (2.11-20080614-5) ...
Setting up libp11-kit0:armel (0.12-3) ...
Setting up ntpdate (1:4.2.6.p5+dfsg-2) ...
Setting up cpio (2.11+dfsg-0.1) ...
update-alternatives: using /bin/mt-gnu to provide /bin/mt (mt) in auto mode
Setting up libstdc++6:armel (4.7.2-5) ...
Setting up vim-tiny (2:7.3.547-7) ...
update-alternatives: using /usr/bin/vim.tiny to provide /usr/bin/rview (rview) in auto mode
update-alternatives: using /usr/bin/vim.tiny to provide /usr/bin/vi (vi) in auto mode
update-alternatives: using /usr/bin/vim.tiny to provide /usr/bin/view (view) in auto mode
update-alternatives: using /usr/bin/vim.tiny to provide /usr/bin/ex (ex) in auto mode
update-alternatives: using /usr/bin/vim.tiny to provide /usr/bin/editor (editor) in auto mode
Setting up readline-common (6.2+dfsg-0.1) ...
Setting up libwrap0:armel (7.6.q-24) ...
Setting up libgcrypt11:armel (1.5.0-5) ...
Setting up procps (1:3.3.3-3) ...
update-alternatives: using /usr/bin/w.procps to provide /usr/bin/w (w) in auto mode
invoke-rc.d: policy-rc.d denied execution of start.
Setting up dhcpcd (1:3.2.3-11) ...
Setting up libk5crypto3:armel (1.10.1+dfsg-5) ...
Setting up ifupdown (0.7.8) ...
Creating /etc/network/interfaces.
Setting up kmod (9-3) ...
Setting up libapt-pkg4.12:armel (0.9.7.9) ...
Setting up libreadline6:armel (6.2+dfsg-0.1) ...
Setting up gnupg (1.4.12-7) ...
Setting up libgnutls26:armel (2.12.20-7) ...
Setting up udev (175-7.2) ...
A chroot environment has been detected, udev not started.
Setting up libkrb5-3:armel (1.10.1+dfsg-5) ...
Setting up initramfs-tools (0.109.1) ...
update-initramfs: deferring update (trigger activated)
Setting up libgssapi-krb5-2:armel (1.10.1+dfsg-5) ...
Setting up apt (0.9.7.9) ...
gpg: keyring `/etc/apt/trusted.gpg' created
gpg: key B98321F9: "Squeeze Stable Release Key <debian-release@lists.debian.org>" not changed
gpg: key 473041FA: "Debian Archive Automatic Signing Key (6.0/squeeze) <ftpmaster@debian.org>" not changed
gpg: key 65FFB764: "Wheezy Stable Release Key <debian-release@lists.debian.org>" not changed
gpg: key 46925553: "Debian Archive Automatic Signing Key (7.0/wheezy) <ftpmaster@debian.org>" not changed
gpg: Total number processed: 4
gpg:              unchanged: 4
gpg: /etc/apt//trustdb.gpg: trustdb created
Setting up flash-kernel (3.3) ...
Setting up wget (1.13.4-3) ...
Setting up linux-image-3.2.0-4-kirkwood (3.2.46-1) ...
Running depmod.
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-4-kirkwood /boot/vmlinuz-3.2.0-4-kirkwood
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
Warning: root device  does not exist

Unable to abort; system will probably be broken!
flash-kernel: deferring update (trigger activated)
run-parts: executing /etc/kernel/postinst.d/zz-flash-kernel 3.2.0-4-kirkwood /boot/vmlinuz-3.2.0-4-kirkwood
flash-kernel: deferring update (trigger activated)
Setting up openssh-client (1:6.0p1-4) ...
Setting up openssh-server (1:6.0p1-4) ...
Creating SSH2 RSA key; this may take some time ...
Creating SSH2 DSA key; this may take some time ...
Creating SSH2 ECDSA key; this may take some time ...
invoke-rc.d: policy-rc.d denied execution of restart.
Setting up linux-image-kirkwood (3.2+46) ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
Warning: root device  does not exist

Unable to abort; system will probably be broken!
Unsupported platform.
run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1
dpkg: error processing initramfs-tools (--configure):
 subprocess installed post-installation script returned error exit status 1
Processing triggers for flash-kernel ...
Unsupported platform.
dpkg: error processing flash-kernel (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 initramfs-tools
 flash-kernel
Setting up initramfs-tools (0.109.1) ...
update-initramfs: deferring update (trigger activated)
Setting up flash-kernel (3.3) ...
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
Warning: root device  does not exist

Unable to abort; system will probably be broken!
Unsupported platform.
run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1
dpkg: error processing initramfs-tools (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 initramfs-tools
Setting up initramfs-tools (0.109.1) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
Warning: root device  does not exist

Unable to abort; system will probably be broken!
Unsupported platform.
run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1
dpkg: error processing initramfs-tools (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 initramfs-tools
Setting up initramfs-tools (0.109.1) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
Warning: root device  does not exist

Unable to abort; system will probably be broken!
Unsupported platform.
run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1
dpkg: error processing initramfs-tools (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 initramfs-tools
Setting up initramfs-tools (0.109.1) ...
update-initramfs: deferring update (trigger activated)
Processing triggers for initramfs-tools ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood
Warning: root device  does not exist

Unable to abort; system will probably be broken!
Unsupported platform.
run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1
dpkg: error processing initramfs-tools (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 initramfs-tools
 
Nachdem da anscheinend nicht nur ein Fehler aufgetreten ist, scheint im Skript grundsätzlich was falsch zu laufen. Haben andere Wheezy mit dem Skript von Doozan problemlos installieren können?
 
das weiß ich leider nicht oder hat wer nen anders script für wheezy zum testen?

edit: habs nach der anleitung gemacht http://morschi.com/2012/10/05/seagate-goflex-net-debian/

hab jetzt erst mal Debian Squeeze auf den stick gehauen das ging durch!! nur irgendwie bootet doe goflex net immer ins rescue system?!! versteh nur nicht warum
 
Zuletzt bearbeitet:
Kannst das mal genau erklären sorry kenn mich da net ganz so gut aus


Von meinem Apfelphone gesendet mit der Hardwareluxx app
 
Serielle Verbindung zum Gerät. Meist realisiert über einen USB zu Seriell Wandler, der mit entsprechenden Kabeln angeschlossen wird. Verbunden werden müssen 3 Leitungen. TX, RX und GND. GND zu GND, und TX des Geräts an RX des Wandlers (Hosts), mit dem überwacht wird, sowie verbleibend entsprechend RX zu TX. Damit kannst du auf dem Gerät arbeiten, ohne, dass es im Netzwerk ist. Ist für sämtliche Embedded Geräte sozusagen der Direkzugang zum Gerät.
Wichtig: Der Kernel braucht den Bootparameter "console=". Wie z.B. "console=ttyS0, 115200". Meist schon als Bootarg voreingestellt.
 
So was hab ich leider nicht gibts keinen anderen weg im rescue system den stick als erstes lesen zu lassen ? Rescue läuft ja perfekt


Edit sorry hatte mich oben falsch ausgedrückt


Von meinem Apfelphone gesendet mit der Hardwareluxx app
 
Wenn du vom Rescue-System aus die U-Boot Environment auslesen und schreiben kannst (Kommandos fw_printenv und fw_setenv), dann wäre das mal ein Anfang.
 
fw_printenv ausgabe
Code:
rescue:~# fw_printenv
ethact=egiga0
bootdelay=3
baudrate=115200
mainlineLinux=yes
console=ttyS0,115200
led_init=green blinking
led_exit=green off
led_error=orange blinking
mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data)
mtdids=nand0=orion_nand
partition=nand0,2
stdin=serial
stdout=serial
stderr=serial
rescue_set_bootargs=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts $rescue_custom_params
rescue_bootcmd=if test $rescue_installed -eq 1; then run rescue_set_bootargs; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000; else run pogo_bootcmd; fi
pogo_bootcmd=if fsload uboot-original-mtd0.kwb; then go 0x800200; fi
force_rescue=0
force_rescue_bootcmd=if test $force_rescue -eq 1 || ext2load usb 0:1 0x1700000 /rescueme 1 || fatload usb 0:1 0x1700000 /rescueme.txt 1; then run rescue_bootcmd; fi
ubifs_mtd=3
ubifs_set_bootargs=setenv bootargs console=$console ubi.mtd=$ubifs_mtd root=ubi0:rootfs rootfstype=ubifs $mtdparts $ubifs_custom_params
ubifs_bootcmd=run ubifs_set_bootargs; if ubi part data && ubifsmount rootfs && ubifsload 0x800000 /boot/uImage && ubifsload 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; fi
usb_scan=usb_scan_done=0;for scan in $usb_scan_list; do run usb_scan_$scan; if test $usb_scan_done -eq 0 && ext2load usb $usb 0x800000 /boot/uImage 1; then usb_scan_done=1; echo "Found bootable drive on usb $usb"; setenv usb_device $usb; setenv usb_root /dev/$dev; fi; done
usb_scan_list=1 2 3 4
usb_scan_1=usb=0:1 dev=sda1
usb_scan_2=usb=1:1 dev=sdb1
usb_scan_3=usb=2:1 dev=sdc1
usb_scan_4=usb=3:1 dev=sdd1
usb_init=run usb_scan
usb_device=0:1
usb_root=/dev/sda1
usb_rootdelay=10
usb_set_bootargs=setenv bootargs console=$console root=$usb_root rootdelay=$usb_rootdelay rootfstype=$usb_rootfstype $mtdparts $usb_custom_params
usb_bootcmd=run usb_init; run usb_set_bootargs; run usb_boot
usb_boot=mw 0x800000 0 1; ext2load usb $usb_device 0x800000 /boot/uImage; if ext2load usb $usb_device 0x1100000 /boot/uInitrd; then bootm 0x800000 0x1100000; else bootm 0x800000; fi
bootcmd=usb start; run force_rescue_bootcmd; run ubifs_bootcmd; run usb_bootcmd; usb stop; run rescue_bootcmd; run pogo_bootcmd; reset
ethaddr=00:10:XX:XX:XX
usb_rootfstype=ext3
serverip=192.168.1.2
ipaddr=192.168.1.1
if_netconsole=ping $serverip
start_netconsole=setenv ncip $serverip; setenv bootdelay 10; setenv stdin nc; setenv stdout nc; setenv stderr nc; version;
preboot=run if_netconsole start_netconsole
arcNumber=3089
set_bootargs_rescue=setenv bootargs console=$console ubi.mtd=2 root=ubi0:rootfs ro rootfstype=ubifs $mtdparts
bootcmd_rescue=run set_bootargs_rescue; nand read.e 0x800000 0x100000 0x400000; bootm 0x800000
bootcmd_pogo=run bootcmd_rescue
rescue_installed=1

rescue:~# fw-setenv
-sh: fw-setenv: not found

mhh und nun ?
 
Um zu sehen, was schief geht, brauchst Du dringend eine Console, worin der Bootablauf ausgegeben wird. Idealerweise ist das eine serielle Verbindung. Alternativ kannst Du mal nach Netzwerkkonsole suchen. Damit werden aber nur Meldungen bis zum Laden des Kernels ausgegeben. Mit der seriellen Konsole siehst Du den kompletten Bootablauf. Ist im Prinzip der Ersatz für Monitor und Tastatur für das Gerät. Bei allen Themen, wo es über das Netzwerk nicht mehr geht, kann die serielle Konsole zur Fehlersuche verwendet werden.
 
Wenn das die GoFlex Net ist die ich mit dir zusammen aufgesetzt habe dann hast du eine netconsole die du nutzen kannst und brauchst keine serielle konsole. Nach den Uboot Envs sieht es so ja auch so aus! Also PC direkt per LAN Kabel an die GoFlex. Den LanPort auf 192.168.1.2 einrichten und dann kanst die netconsole nutzen...

Gibts bei doozan auch ne anleitung.
 
ne das ist die neue !! aber die fw befehle hab ich genau so wie die auf der ersten eingegeben sieht man ja oben im log
 
so meine lieben ;) hier die netconsole ausgabe hoffe ihr habt nen tipp für mich ich versteh da nur bahnhof sorry

einmal mit eingesteckt stick wo eigentlich squeeze drauf sein sollte!!
Code:
*** Version 0.1 ***

*** listening on port 6666 ***

U-Boot 2011.12 (Apr 18 2012 - 23:08:20)
Seagate GoFlexNet
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1
GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709
Hit any key to stop autoboot:  0 
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
Loading file "/rescueme" from usb device 0:1 (usbda1)
** File not found /rescueme
reading /rescueme.txt

** Unable to read "/rescueme.txt" from usb 0:1 **
Creating 1 MTD partitions on "nand0":
0x000002500000-0x000010000000 : "mtd=3"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=3"
UBI: MTD device size:            219 MiB
UBI: number of good PEBs:        1751
UBI: number of bad PEBs:         1
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     0
UBI: available PEBs:             1730
UBI: total number of reserved PEBs: 21
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 1/1
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19
Error reading superblock on volume 'ubi:rootfs'!
Loading file "/boot/uImage" from usb device 0:1 (usbda1)
** File not found /boot/uImage
** Block device usb 1 not supported
** Block device usb 2 not supported
** Block device usb 3 not supported
Loading file "/boot/uImage" from usb device 0:1 (usbda1)
** File not found /boot/uImage
Loading file "/boot/uInitrd" from usb device 0:1 (usbda1)
** File not found /boot/uInitrd
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..

NAND read: device 0 offset 0x100000, size 0x400000
 4194304 bytes read: OK
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-3.3.2-kirkwide
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3627768 Bytes = 3.5 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...


und hier ohne stick
Code:
*** Version 0.1 ***

*** listening on port 6666 ***

U-Boot 2011.12 (Apr 18 2012 - 23:08:20)
Seagate GoFlexNet
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1
GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709
Hit any key to stop autoboot:  0 
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 1 USB Device(s) found
       scanning bus for storage devices... 0 Storage Device(s) found
** Block device usb 0 not supported

** Invalid boot device **
Creating 1 MTD partitions on "nand0":
0x000002500000-0x000010000000 : "mtd=3"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=3"
UBI: MTD device size:            219 MiB
UBI: number of good PEBs:        1751
UBI: number of bad PEBs:         1
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     0
UBI: available PEBs:             1730
UBI: total number of reserved PEBs: 21
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 1/1
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19
Error reading superblock on volume 'ubi:rootfs'!
** Block device usb 0 not supported
** Block device usb 1 not supported
** Block device usb 2 not supported
** Block device usb 3 not supported
** Block device usb 0 not supported
** Block device usb 0 not supported
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..

NAND read: device 0 offset 0x100000, size 0x400000
 4194304 bytes read: OK
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-3.3.2-kirkwide
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3627768 Bytes = 3.5 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

HILFE ;)
 
Deine Uboot Envs sind dank der PogoPlug geschichte die du dem GoFlex Net angetan hast total verhunzt... Evtl. kannst du die Uboot Envs der funktionierenden GFN komplett in eine datei speichern und dann auf der "neuen" GoFlex restoren (natürlich mit geänderter Mac) ...

Irgendwie scheint er beim booten des Kernels nicht klar zu kommen.

Ist der Stick den du damit nutzen willst ne kopie von dem anderen GoFlex der Funktioniert? Wenn ja mach da mal bitte ein uname -a und poste das hier.
 
Zuletzt bearbeitet:
Findet keinen Kernel zum Starten.
Loading file "/boot/uImage" from usb device 0:1 (usbda1)
** File not found /boot/uImage
** Block device usb 1 not supported
** Block device usb 2 not supported
** Block device usb 3 not supported
Loading file "/boot/uImage" from usb device 0:1 (usbda1)
** File not found /boot/uImage
Loading file "/boot/uInitrd" from usb device 0:1 (usbda1)
** File not found /boot/uInitrd
Wrong Image Format for bootm command
ERROR: can't get kernel image!
stopping USB..

Und mal ehrlich, lesen solltest du schon auch können.
Muss man nur Stück für Stück durchgehen. Die meisten Fehler werden schön gemeldet.

Ich vermute mal im NAND hast du nur das Rescue Image. Weil über USB kein Kernel geladen werden kann und so eingestellt ist, wird anschließend wohl vom NAND geladen und da ist eben nur Rescue drin.
 
ne auf dem stick sollte ein frisches sein lochman!! wie bieg ich das jetzt wieder gerade :/ son mist
 
kann mir bei dem problem evtl einer unter die arme greifen
 
Ich habe was neues!!!
Das Git Repo für 2.6.32.61 hab ich grade gelöscht. Das hat keinen Sinn ergeben, weil überhaupt nichts funktioniert hat. Anscheinend doch weit zuviele Unterschiede, entgegen der ersten Vermutung.

ABER, ich habe im folgenden einen gepatchten 2.6.31.14er Kernel, basierend auf den neuesten Medion/Zyxel Sources. Er hat devtmpfs-, sowie accept4-Unterstützung und eine geänderte Versionsnummer im 2.6.32er Bereich. Das heißt die neueren Udev-Versionen sollten damit funktionieren. Das heißt wiederum Wheezy und Konsorten sollten damit problemlos gehen.

Bitte testen!!! Erste Tests mit einem Wheezy basierten Emdebian sahen GUT aus. :d
http://www.hs-augsburg.de/~ingmar_k/Pogoplug_V3/kernels/2.6.32-00-OXNAS-wheezy-fake-1.0.tar.bz2
Ist momentan für die Pogoplug V3 Classic. Sourcen werde ich bei Gelegenheit ins github stellen und eventuell noch nen Kernel für die Pogo pro kompilieren. Würde aber erst mal gerne wissen, wie sich der Kernel so macht.
 
Zuletzt bearbeitet:
Kannst Du bitte einen Patch auf Basis der originalen Medion/Zyxel Sourcen bereitstellen? Lieferst Du den Treiber für das WLAN Modul des Pro mit? Woher bekommt man den verwendeten Raspberry Crosscompiler? Sind die verwendeten Compiler Parameter im Source-Patch enthalten?

Mit Squeeze ist die SATA Performance ist schon mal in Ordnung: 70MB/s schreiben und 80MB/s lesen. Mit USB Stick: 17,5MB/s schreiben und 33MB/s lesen. Mit USB Festplatte liegt die Schreibperformance mit 22MB/s im üblichen Bereich.

Das uImage ist deutlich größer, als meine mit 2.6.31.14er Kernel.

Hatte der Pogoplug-basierte Kernel (telzey patches) nicht schon devtmpfs unterstützt? Warum ist es bei den Medion/Zyxel Sourcen erforderlich dies über einen zusätzlichen Patch bereitzustellen?
 
Zuletzt bearbeitet:
Also die Sources, samt Patches (im Ordner "patches") können hier bezogen werden:
https://github.com/ingmar-k/2.6.31.14_OXNAS_kernel

Treiber für Wlan hab ich grade nicht parat, aber den bekommt man ja direkt von Cloudengines und kann sich das Modul selbst kompilieren. Da ich inzwischen im Slot meiner Pro kein WLAN mehr betreibe, interessiert mich das momentan eher weniger.
Der verwendete Compiler ist dieser hier:
https://github.com/raspberrypi/tools/tree/master/arm-bcm2708/arm-bcm2708hardfp-linux-gnueabi/bin
Funktioniert anscheinend bestens.

Die Größe des uImages kommt von den enthaltenen Debugging Features, die vorsichtshalber noch enthalten sind. Im Fehlerfall soll möglichst viel an Infos herauskommen. Erst wenn der Kernel getestet ist, sollte man das alles abstellen und das uImage somit deutlich verkleinern.
Mich persönlich interessiert jetzt noch RAMZSWAP, Btrfs und eventuell noch die Unterstützung für den Jmicron JMB362 Chipsatz. Für's erste bin ich ganz zufrieden mit dem aktuellen Stand der Dinge.
 
Ich habe immer den Treiber RT3090PCIe 2.4.0.4 von Mediatek genommen (MediaTek - Downloads Linux) zzgl. Patch von telzey, damit die Console nicht mit Debugmeldungen vollgespamt wird.

Hattest Du Deine SATA Karte schon mal am Laufen? Welchen Vorteil hast Du damit gegenüber SATA Portmultiplexern?
 
Zuletzt bearbeitet:
Hab gerade mal nen backup meiner damals 1 frischen Goflex maschine auf den stick gehauen Squeeze frisch!! und hab den stick in die goflex gesteckt und per netconsole mal beobachtet!!
Code:
*** Version 0.1 ***

*** listening on port 6666 ***

U-Boot 2011.12 (Apr 18 2012 - 23:08:20)
Seagate GoFlexNet
arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2009q3-67) 4.4.1
GNU ld (Sourcery G++ Lite 2009q3-67) 2.19.51.20090709
Hit any key to stop autoboot:  0 
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
Loading file "/rescueme" from usb device 0:1 (usbda1)
** File not found /rescueme
reading /rescueme.txt

** Unable to read "/rescueme.txt" from usb 0:1 **
Creating 1 MTD partitions on "nand0":
0x000002500000-0x000010000000 : "mtd=3"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    129024 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          512 (aligned 512)
UBI: data offset:                2048
UBI: attached mtd1 to ubi0
UBI: MTD device name:            "mtd=3"
UBI: MTD device size:            219 MiB
UBI: number of good PEBs:        1751
UBI: number of bad PEBs:         1
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     0
UBI: available PEBs:             1730
UBI: total number of reserved PEBs: 21
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 1/1
UBIFS error (pid 0): ubifs_get_sb: cannot open "ubi:rootfs", error -19
Error reading superblock on volume 'ubi:rootfs'!
Loading file "/boot/uImage" from usb device 0:1 (usbda1)
1 bytes read
Found bootable drive on usb 0:1
Loading file "/boot/uImage" from usb device 0:1 (usbda1)
2279256 bytes read
Loading file "/boot/uInitrd" from usb device 0:1 (usbda1)
7004538 bytes read
## Booting kernel from Legacy Image at 00800000 ...
   Image Name:   Linux-3.3.2
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2279192 Bytes = 2.2 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 01100000 ...
   Image Name:   initramfs-3.3.2-kirkwood-dg
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    7004474 Bytes = 6.7 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Jetzt kommt das sehr komische davor bin ich per 192.168.178.26 ins rescue gekommen!! das pack ich jetzt schon mal nicht mehr!! aber im router erkennt er
alarm 192.168.178.33
rescue 192.168.178.26

beides mit der gleichen MAC?? !! Anpingen funtzt bei beiden IP´s nicht!!

erst wenn ich ohne stick boote komm ich wieder ins rescue!! mein latein ist am ende :(
 
Zuletzt bearbeitet:
Hardwareluxx setzt keine externen Werbe- und Tracking-Cookies ein. Auf unserer Webseite finden Sie nur noch Cookies nach berechtigtem Interesse (Art. 6 Abs. 1 Satz 1 lit. f DSGVO) oder eigene funktionelle Cookies. Durch die Nutzung unserer Webseite erklären Sie sich damit einverstanden, dass wir diese Cookies setzen. Mehr Informationen und Möglichkeiten zur Einstellung unserer Cookies finden Sie in unserer Datenschutzerklärung.


Zurück
Oben Unten refresh