Bios F8
1. Großer Misst
mit TURBO gibt es immer noch Probleme daher STANDARD
bei den Corsair Dominator PC8500...
Hallo hast du es so mal probiert ???
Robust Graphics Booster [Auto]
CPU Clock Ratio [8 X]
Fine CPU Clock Ratio [+0.0]
CPU Frequency 3.20GHz(400x8)
CPU Host Clock Control [Enabled]
CPU Host Frequency(Mhz) [400]
PCI Express Frequency(Mhz) [Auto]
C.I.A.2 [Disabled]
!! Performance Enhanced With... [Turbo]
System Memory Multiplier [2.40B]
Memory Frequency(Mhz) 960
DRAM Timing Selectable [Manual]
****** Standard Timing Control *******
CAS Latency Time [5]
nach deiner Speichervorgabe
DRAM RAS# to CAS# Delay [5]
nach deiner Speichervorgabe
DRAM RAS# Precharge [5]
nach deiner Speichervorgabe
Precharge delay (tRAS) [18]
nach deiner Speichervorgabe
****** Advanced Timing Control *******
ACT to ACT Delay [4]
Rank Write To READ Delay [4]
Write To Precharge Delay [8]
Refresh to ACT Delay [56]
Read to Precharge Delay [4]
Static tRead Value [7]
Static tRead Phase Adjust [Auto]
Command Rate(CMD) [Auto]
***** Clock Driving & Skew Control *****
CPU/PCIEX Clock Driving Control [800mV]
CPU Clock Skew Control [Normal]
(G)MCH Clock Skew Control [Normal]
**** System Voltage NOT Optimized !! ****
System Voltage Control [Manual]
DDR2 OverVoltage Control [+0.100V]
nach deiner Speichervorgabe
PCI-E OverVoltage Control [Normal]
FSB Voltage OverControl [Normal]
(G)MCH OverVoltage Control [Normal]
MCH Reference Voltage Control [Normal]
DDR Reference Voltage Control [Normal]
DDR Termination Voltage Control [Normal]
CPU GTLREF1 Voltage Ratio [Auto]
CPU GTLREF2 Voltage Ratio [Normal]
Loadline Calibration [Auto]
CPU Voltage Control [Normal]
nach deiner Einstellung
Normal CPU Vcore 1.30000V
PS. bei mir klappt Turbo ohne Probleme