Weiß jemand was über das Update ?
Irgendwelche sinnvolle Neuerungen ?
Ich habe mich genötigt gesehen trotz des (anscheinend) fehlenden Changelogs von SD23 auf SD24 upzudaten nachdem die Festplatte innerhalb ihrer ersten 8 Betriebsstunden stockte und einen Bluescreen produziert hatte.
(Mit dem gleichen Image, das von einer konventionellen Platte vorher problemlos lief (IBM/Lenovo T60 XP SP3))
Abgesehen davon, dass
a) das Changelog zu fehlen scheint (Kindergarten)
b) und dass der bei SD23 mit Smartmontools aufgeführte:
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
bei der SD24 nicht mehr gelistet wird
c) die Betriebsstunden (und ggfs. andere S.M.A.R.T. Werte) auf 0 zurückgesetzt wurden. Hey was schert den Kunden der Wiederverkaufswert. Eine Platte, die so leicht fabrikneu gesetzt werden kann, hat für Käufer, die sich informieren, einen Ebay Wert von ...
d) die SCT capabilities von 0x103b auf 0x1001 zurückgingen
von SD23:
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
auf SD24:
SCT capabilities: (0x1001) SCT Status supported.
scheint das Drive jetzt ohne Stocken durchzulaufen. Smartmontools Ausgabe im Anschluss.
Code:
smartctl 5.40 2010-10-16 r3189 [i686-w64-mingw32-xp-sp3] (sf-win32-5.40-1)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus XT series
Device Model: ST92505610AS
Serial Number: 5YV00FJ4
Firmware Version: SD24
User Capacity: 250.059.350.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Dec 12 13:49:14 2010 WN
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 51) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always - 1580356
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 1
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 7328
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 2
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 253 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 076 076 045 Old_age Always - 24 (Min/Max 22/24)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 2
194 Temperature_Celsius 0x0022 024 040 000 Old_age Always - 24 (0 22 0 0)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1580356
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
If the drive would have performed normally with SD23 I would have already have recommended the drive earlier (likely resulting in at least one buy).
Without ChangeLog for SD24 I cannot feel confident to recommend the drive. Sorry, Seagate.
Greetings,
Frieder
Keywords: SD23 SD24 update upgrade firmware missing changelog blue screen Windows kindergarden smartctl -a