//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
//http://enbdev.com
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
/*
THIS IS HLSL FILE FORMAT FOR EXECUTING ADDITIONAL
POST PROCESSING EFFECTS. MAKE THE COPY BEFORE CHANGING IT!
*/
//enable sharpening
#define ESHARPENING
//if defined, color sharpen, otherwise sharp by gray
#define ESHARPENINGCOLOR
//enable noise in dark areas
#define ENOISE
float SamplingRange=1; //sharpening or blurring range
float SharpeningAmount=1;
float ScanLineAmount=0;
float ScanLineRepeat=1; //0.5, 0.3333, 0.25, 0.125, so on
float NoiseAmount=0.1;
//keyboard controled variables
float tempF1;
float tempF2;
float tempF3;
float tempF4;
float tempF5;
float tempF6;
float tempF7;
float tempF8;
float tempF9;
float tempF0;
//global variables, already set before executing this code
float ScreenSize; //width of the display resolution (1920 f.e.)
float ScreenScaleY; //screen proportions (1.333 for 1920/1080)
//textures
texture2D texColor;
texture2D texNoise;
sampler2D SamplerColor = sampler_state
{
Texture = <texColor>;
MinFilter = LINEAR;
MagFilter = LINEAR;
MipFilter = NONE;//NONE;
AddressU = Clamp;
AddressV = Clamp;
SRGBTexture=FALSE;
MaxMipLevel=0;
MipMapLodBias=0;
};
sampler2D SamplerNoise = sampler_state
{
Texture = <texNoise>;
MinFilter = POINT;
MagFilter = POINT;
MipFilter = NONE;//NONE;
AddressU = Wrap;
AddressV = Wrap;
SRGBTexture=FALSE;
MaxMipLevel=0;
MipMapLodBias=0;
};
struct VS_OUTPUT_POST {
float4 vpos : POSITION;
float2 txcoord : TEXCOORD0;
};
struct VS_INPUT_POST {
float3 pos : POSITION;
float2 txcoord : TEXCOORD0;
};
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
//
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
VS_OUTPUT_POST VS_PostProcess(VS_INPUT_POST IN)
{
VS_OUTPUT_POST OUT;
float4 pos=float4(IN.pos.x,IN.pos.y,IN.pos.z,1.0);
OUT.vpos=pos;
OUT.txcoord.xy=IN.txcoord.xy;
return OUT;
}
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
//--------------------Fast Approximate Anti-Aliasing --------------------------
// FXAA v2 CONSOLE by TIMOTHY LOTTES @ NVIDIA
// Ported to ENBSeries by MysTer92 (Svyatoslav Gampel)
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
float4 PS_PostProcess(VS_OUTPUT_POST i) : COLOR
{
#define FXAA_SUBPIX_SHIFT (1.0/8.0)
#define FXAA_REDUCE_MIN (1.0/32.0)
#define FXAA_REDUCE_MUL (1.0/16.0)
#define FXAA_SPAN_MAX 8.0
half2 rcpFrame = half2(1/ScreenSize, 1/(ScreenSize/ScreenScaleY));
half4 posPos;
posPos.xy = i.txcoord.xy;
posPos.zw = posPos.xy - (rcpFrame.xy * (0.5 + FXAA_SUBPIX_SHIFT));
half3 rgbNW = tex2D(SamplerColor, posPos.zw ).xyz;
half3 rgbNE = tex2D(SamplerColor, posPos.zw + half2(rcpFrame.x, 0.0) ).xyz;
half3 rgbSW = tex2D(SamplerColor, posPos.zw + half2(0.0, rcpFrame.y) ).xyz;
half3 rgbSE = tex2D(SamplerColor, posPos.zw +rcpFrame.xy ).xyz;
half3 rgbM = tex2D(SamplerColor, posPos.xy).xyz;
half3 luma = half3(0.299, 0.587, 0.114);
half lumaNW = dot(rgbNW, luma);
half lumaNE = dot(rgbNE, luma);
half lumaSW = dot(rgbSW, luma);
half lumaSE = dot(rgbSE, luma);
half lumaM = dot(rgbM, luma);
half lumaMin = min(lumaM, min(min(lumaNW, lumaNE), min(lumaSW, lumaSE)));
half lumaMax = max(lumaM, max(max(lumaNW, lumaNE), max(lumaSW, lumaSE)));
half2 dir;
half lumaNWNE = lumaNW + lumaNE;
half lumaSWSE = lumaSW + lumaSE;
dir.x = -((lumaNWNE) - (lumaSWSE));
dir.y = ((lumaNW + lumaSW) - (lumaNE + lumaSE));
half dirReduce = max( (lumaSWSE + lumaNWNE) * (0.25 * FXAA_REDUCE_MUL), FXAA_REDUCE_MIN);
half rcpDirMin = 1.0/(min(abs(dir.x), abs(dir.y)) + dirReduce);
dir = min(half2( FXAA_SPAN_MAX, FXAA_SPAN_MAX), max(half2(-FXAA_SPAN_MAX, -FXAA_SPAN_MAX), dir * rcpDirMin)) * rcpFrame.xy;
half3 rgbA = (1.0/2.0) * (tex2D(SamplerColor, posPos.xy + dir * (1.0/3.0 - 0.5) ).xyz + tex2D(SamplerColor, posPos.xy + dir * (2.0/3.0 - 0.5) ).xyz);
half3 rgbB = rgbA * (1.0/2.0) + (1.0/4.0) * (tex2D(SamplerColor, posPos.xy + dir * (0.0/3.0 - 0.5) ).xyz + tex2D(SamplerColor, posPos.xy + dir * (3.0/3.0 - 0.5) ).xyz);
half lumaB = dot(rgbB, luma);
if((lumaB < lumaMin) || (lumaB > lumaMax))
return half4(rgbA, 1.0);
return float4(rgbB, 1.0);
}
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
//--------------------ENBSERIES SHARP & NOISE --------------------------
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
float4 PS_PostProcess_Sharp_Noise(VS_OUTPUT_POST IN, float2 vPos : VPOS) : COLOR
{
float4 res;
float4 coord=0.0;
coord.xy=IN.txcoord.xy;
float4 origcolor;
coord.w=0.0;
origcolor=tex2Dlod(SamplerColor, coord);
float2 offset[8]=
{
float2(1.0, 1.0),
float2(-1.0, -1.0),
float2(-1.0, 1.0),
float2(1.0, -1.0),
float2(1.41, 0.0),
float2(-1.41, 0.0),
float2(0.0, 1.41),
float2(0.0, -1.41)
};
int i=0;
float4 tcol=origcolor;
float invscreensize=1.0/ScreenSize;
for (i=0; i<8; i++) //higher quality
{
float2 tdir=offset.xy;
coord.xy=IN.txcoord.xy+tdir.xy*invscreensize*SamplingRange;//*1.0;
float4 ct=tex2Dlod(SamplerColor, coord);
tcol+=ct;
}
tcol*=0.111; // 1.0/(8+1) //higher quality
//sharp
#ifdef ESHARPENING
#ifdef ESHARPENINGCOLOR
//color
res=origcolor*(1.0+((origcolor-tcol)*SharpeningAmount));
#else
//non color
float difffact=dot((origcolor.xyz-tcol.xyz), 0.333);
res=origcolor*(1.0+difffact*SharpeningAmount);
#endif
//less sharpening for bright pixels
float rgray=origcolor.z; //blue fit well
//float rgray=max(origcolor.x, max(origcolor.y, origcolor.z));
rgray=pow(rgray, 3.0);
res=lerp(res, origcolor, saturate(rgray));
#endif
//grain noise
#ifdef ENOISE
float origgray=max(res.x, res.y);//dot(res.xyz, 0.333);
origgray=max(origgray, res.z);
coord.xy=IN.txcoord.xy*16.0 + origgray;
float4 cnoi=tex2Dlod(SamplerNoise, coord);
res=lerp(res, (cnoi.x+0.5)*res, NoiseAmount*saturate(1.0-origgray*1.8));
#endif
res.w=1.0;
return res;
}
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
//--------------------Fast Approximate Anti-Aliasing Techniques -------------
//++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
technique PostProcess //FXAA
{
pass P0
{
VertexShader = compile vs_3_0 VS_PostProcess();
PixelShader = compile ps_3_0 PS_PostProcess();
FogEnable=FALSE;
ALPHATESTENABLE=FALSE;
SEPARATEALPHABLENDENABLE=FALSE;
AlphaBlendEnable=FALSE;
FogEnable=FALSE;
SRGBWRITEENABLE=FALSE;
}
}
technique PostProcess2 //FXAA
{
pass P0
{
VertexShader = compile vs_3_0 VS_PostProcess();
PixelShader = compile ps_3_0 PS_PostProcess();
FogEnable=FALSE;
ALPHATESTENABLE=FALSE;
SEPARATEALPHABLENDENABLE=FALSE;
AlphaBlendEnable=FALSE;
FogEnable=FALSE;
SRGBWRITEENABLE=FALSE;
}
}
technique PostProcess3 //FXAA
{
pass P0
{
VertexShader = compile vs_3_0 VS_PostProcess();
PixelShader = compile ps_3_0 PS_PostProcess();
FogEnable=FALSE;
ALPHATESTENABLE=FALSE;
SEPARATEALPHABLENDENABLE=FALSE;
AlphaBlendEnable=FALSE;
FogEnable=FALSE;
SRGBWRITEENABLE=FALSE;
}
}
technique PostProcess4 //FXAA
{
pass P0
{
VertexShader = compile vs_3_0 VS_PostProcess();
PixelShader = compile ps_3_0 PS_PostProcess();
FogEnable=FALSE;
ALPHATESTENABLE=FALSE;
SEPARATEALPHABLENDENABLE=FALSE;
AlphaBlendEnable=FALSE;
FogEnable=FALSE;
SRGBWRITEENABLE=FALSE;
}
}
technique PostProcess5
{
pass P0
{
VertexShader = compile vs_3_0 VS_PostProcess();
PixelShader = compile ps_3_0 PS_PostProcess_Sharp_Noise();
DitherEnable=FALSE;
ZEnable=FALSE;
CullMode=NONE;
ALPHATESTENABLE=FALSE;
SEPARATEALPHABLENDENABLE=FALSE;
AlphaBlendEnable=FALSE;
StencilEnable=FALSE;
FogEnable=FALSE;
SRGBWRITEENABLE=FALSE;
}
}
Es gab zwar wirklich Probleme mit manchen Codes, aber die sind eigentlich mittlerweile alle beseitigt, also mal schauen, je nach befinden/wetter/lust etc, hau ich die 2.1 am wochenende einfach mal raus... das beste daran ist eh die enbeffect die dank Dude richtig geil aufgebaut ist und noch einfacher zum "tunen" ist. 
crosire (alias somedudehere)
ihr braucht ja ehr ein Motiv wo in der Mitte "wenig" ist dafür an den Rändern viel sichtbar, ich schaue daheim mal ob ich was dof-loses damit rumfliegen habe 
