[Sammelthread] AMD K7 - Sockel A (462)

[The Sandman]

Crazy Epox! 1M Pi dürfte nicht mehr gehen, oder?
Ich glaube langsam wirklich an 290er nF2...

270+ means vmods and also death on NF7... dropped a post on hwbot.

 

[Sparksnl]

So which BIOS and settings were used? Where can I find that post on HWBOT?
(I did not have much time this week and was busy with my CH5F-Z)

 

[The Sandman]

A7N8X-E Deluxe as an alternative for socket 462

community.hwbot.org

Go ahead and vmod your NF7...

" + Title + "

digitals bios 619xt or infras x1 can boot up to 270-MHz. You need more - vmod it and don't complain afterwards.
I will leave a trail of tears for doing so.

I'm still sad and also not very sober

 

[Sparksnl]

I have more then enough boards which I can test before I go to my best boards. And... I already destroyed my best board so what else can happen...
I use NB and DDR mods already.

 

[digitalbath]

For which motherboard are these tools?

I was looking for a tool to change FSB in Windows. Most tools like setfsb didn`t have the right clock generator (CY28372OC) for my ASRock K7S8X (3.0). Finaly I found a useful tool to change FSB...

tools:
cheepomemtweak: change memory settings in Windows for K7 SIS Chipsets
setfsb: change FSB, well known
clockgen: change FSB, well known
setfsbU14beta2_L7S7A2: special version for L7S7A2 (SIS746)
cpucool-8-1-0: not sure of all funktions, but there is a FSB change tool with a lot of clock generators like NF2. I can use this tool for my K7S8X

I was looking in some old backups... And I found Tictac's Hotmail email address. I just mailed him to test if this still works.

Nice! If you get a response, ask him about NF2 datasheets.

 

[Sparksnl]

Thanks, I will let you know if he gives a response.
@The Sandman Which BIOS settings work best for this?
Any of the experimentals or just out of the box?

Edit: @digitalbath I use 8RDAVCORE as wel..

 

[The Sandman]

See my screens, I left pictures with settings for the tweaker. No secrets.

 

[digitalbath]

Edit: @digitalbath I use 8RDAVCORE as wel..

I also use this tool. Clockgen for NF2 is most used tool.

 

[Sparksnl]

I will take a look at the thread and pictures. I am having issues reading German as well sometimes.

 

[Tzk]

see you guys go above 265MHz FSB now.

Well, the fsb wall at 265 is still present... i‘d love to know what dfi did to pass it.

If you have trouble reading a german post, just quote it. I‘m sure someone will help you out with translating it

 

[The Sandman]

digitals and Infras bios and a combination of all these 22xx 44xx values you can set in the tweaker helped a lot. For 3D benches you have to raise the agp latency using 8rda vcore. The Board was capable of booting 260+ (1.5V vdd) itself without all of these values. The "final kick" was the vmod.

 

[Sparksnl]

Just like my best board then, without mods with 1.6v 260+.

 

[The Sandman]

Nothing compares to mine. Word

Spoiler

Datenschutzhinweis für Youtube

An dieser Stelle möchten wir Ihnen ein Youtube-Video zeigen. Ihre Daten zu schützen, liegt uns aber am Herzen: Youtube setzt durch das Einbinden und Abspielen Cookies auf ihrem Rechner, mit welchen sie eventuell getracked werden können. Wenn Sie dies zulassen möchten, klicken Sie einfach auf den Play-Button. Das Video wird anschließend geladen und danach abgespielt.

Youtube Videos ab jetzt direkt anzeigen

Video anzeigen

yes, I'm a smart mark... soo

 

[WMDK]

@WMDK : So few NF7?

Yes, I know. It's barely enough to to live with That's why I'm always looking for some more to join the little family At least I have the same amount in non-boxed condition as well – to cover me up with in cold nights

 

[Sparksnl]

I have a little family here as well...

 

[WMDK]

Please share

 

[The Sandman]

Please don't... im still not over it

 

[Sparksnl]

2x 8RDA6+ Pro + 6x NF7(S and non S) + 2x AN7

Other mainboards:

From which: 1x NF7, 2x Ultra B, 2x A7N8X, 1x GA7N400 Pro2, 1x K7N2 Delta L, 1x 8RD3+

And I have more from other motherboards elsewhere...

Edit: I forgot about a few sis Socket A mainboards I have, somewhere...
edit2: correct 1 picture

 

[Tzk]

That's a nice collection. I only got 2x NF7 and 5x A7N8X in various versions.

 

[stunned_guy]

That's a nice collection. I only got 2x NF7 and 5x A7N8X in various versions.

Das ist doch was: ich habe von den Asus A7N8X aller Versionen auch nur 29 Stück

 

[Tzk]

Was alleine der Kram kostet um die alle auf max. FSB zu modden... Zu meiner Schande muss ich gestehen, das bei mir auch noch drei Boards auf ihren Satz Solidcaps warten.

 

[stunned_guy]

Hehehe....aber ich kann dann guten Gewissens sagen, falls mal ein Board verrecken sollte: "Naja, nicht so schlimm, nehme ich halt das nächste"

 

[bschicht86]

"Naja, nicht so schlimm, nehme ich halt das nächste"

Und was, wenn du das dann 28x gesagt hast?

 

[Sparksnl]

That is why I learned to solder that good quickly after years of not soldering...

Edit:
For those wondering. There are some nf3, nf4, am2 and am3 (+ 2 crosshair formula z), s775, asrock z87 formula (brand new), 3x 486, k62+ boards etc... as well.

 

[The Sandman]

Hehehe....aber ich kann dann guten Gewissens sagen, falls mal ein Board verrecken sollte: "Naja, nicht so schlimm, nehme ich halt das nächste"

273-MHz NF7

dann kommst du (ja, nicht böse gemeint)
Direkt aus der Schachtel und unter 250-MHz bis in Win ist Schrott! I Mean it.
Krempel

Ich bin bitter

 

[kOr3]

Mir ist da was ganz cooles in die Hände gefallen. Mal ein KT600 zur Abwechslung

Braucht aber ein kompletten Capjob.
Jemand Bock. Gerne mal melden

 

[The Professor]

Einige dicke Backen

 

[Tzk]

Woah, da ist ja eher die Frage welcher Cap keine dicken Backen macht... :O Immerhin passen Solidcaps farblich sehr gut zum Board.

 

[kOr3]

Dabei sieht man noch nicht mal das ganze Board
Das ist durch, aber meiner Meinung nach absolut würdig gerettet zu werden

 

[XibariS]

absolut würdig gerettet zu werden

Ja bitte, weißes PCB ist so schön und so selten! Da neue Elkos drauf brutzeln würde mir Spaß machen.