[Sammelthread] Asus Rampage Extreme R.o.G. (Intel X48)

• Spezifikationen
• Bilder
• Das Bios
• OC Verhalten
• Speicher Kompatibilätsliste
• Passende CPU Kühler (Lukü)
• FAQ
• Downloads
• Wichtige Links

• LGA 775 socket for:
  - Intel® Core™2 Extreme/Core™2 Quad/ Core™2
• Supports Intel Enhanced Memory 64 Technology (EMT64T)
• Supports Enhanced Intel SpeedStep Technology (EIST)
• Supports Intel Hyper-Threading Technology
• Supports 1600/1333/1066/800MHz FSB
  

• Northbridge:
  - Intel® X48 Express chipset
  - Intel® Fast Memory Access technology
• Southbridge:
  - Intel® ICH9R

• 4 x DIMM, Max. 8 GB, DDR3 2000(O.C.)/1800(O.C.)/1600/1333/1066/800
• ECC,Non-ECC,Un-buffered Memory
• Dual Channel memory architecture
  *Overclock speed
  - Supports Intel® Extreme Memory Profile (XMP)
  - For the X.M.P. support, CPUs with FSB 1333 or above are recommended

• 2 x PCIe 2.0 x16 , support at full x16, x16 speed
• 3 x PCIe x1 ( the PCIEx1_1 (black) is compatible with audio slot)
• 2 x PCI 2.2

• AMI BIOS
• 16 Mb Flash ROM
• DMI 2.0
• PnP
• WfM 2.0
• SM BIOS 2.4
• ACPI 2.0a
• Multi-language BIOS

• SupremeFX X-Fi Audio Card
  - ADI® AD2000B 8-channel High Definition Audio CODEC
  - EAX® Advanced™ HD 4.0
  - X-Fi CMSS®-3D
  - X-Fi Crystalizer™
  - Creative ALchemy
  - Supports 1 x S/PDIF out header
  - Supports Coaxial/Optical S/PDIF out ports on rear

• Dual Gigabit LAN controllers, both featuring AI NET2
• Support Teaming Technology

• Marvell® 88SE6121 controller
  - 1 x UltraDMA 133/100/66/33 for up to 2 PATA devices
  - 1 x External SATA 3.0 Gb/s port (SATA On-the-Go)

• Southbridge:
  - 6 xSATA 3 Gb/s ports
  - Intel Matrix Storage Technology Support RAID 0,1,5,10
• Silicon Image Sil5723 controller:
  - 2 x SATA 3.0 Gb/s port
  - Supports RAID 0, 1

• 1 x PS/2 Keyboard port(purple)
• 1 x External SATA port
• 2 x LAN (RJ45) port
• 6 x USB 2.0/1.1 ports
• 1 x IEEE1394a port
• 1 x Clr CMOS switch

• 3 x USB 2.0 connectors supports additional 6 USB 2.0 ports
• 1 x Floppy disk drive connector
• 1 x IDE connector for two devices
• 6 x SATA connectors (Blue)
• 2 x Speeding HDD SATA connectors (Black)
• 8 x Fan connectors: 1 x CPU / 1 x PWR / 3 x Chassis / 3 x Optional
• 3 x thermal sensor connectors
• 1 x IEEE1394a connector
• 1 x LCD Poster connector
• 1 x EL I/O Shield connector
• 1 x Chassis Intrusion connector
• 24-pin ATX Power connector
• 8-pin ATX 12V Power connector
• 1 x En/Dis-able Clr CMOS slide switch
• System panel connector

• Fusion Block System Accessory
• Optional Thermal Kit for NB and MOS
• DIY Pedestal
• ASUS Optional Fan
• SupremeFX X-Fi Audio Card
• External LCD Poster
• 3 in 1 ASUS Q-Connector Kit
• UltraDMA 133/100/66 cable
• Floppy disk drive cable
• SATA cables
• SATA power cables
• 2-port USB2.0 + IEEE 1394a module
• EL I/O Shield
• Thermal sensor cables
• Cable Ties
• User's manual

• Fusion Block System with optional thermal kit on MOS and NB
• Extreme Tweaker
• TweakIt
• Extreme Engine
  - 16-phase CPU power design
  - 3-phase NB power design
  - 2-phase DDR3 power design
  - ML Caps on CPU, memory and NB respectively
• Speeding HDD
• iROG
• BIOS Flashback
• Loadline Calibration
• Intelligent overclocking tools:
  - CPU Level Up
  - Memory Level Up
  - AI Gear 3 + ™
  - ASUS AI Booster Utility
  - O.C Profile
• Overclocking Protection:
  - COP EX (Component Overheat Protection - EX)
  - Voltiminder LED
  - ASUS C.P.R.(CPU Parameter Recall)

• External LCD Poster
• Onboard Switches: TweakIt / Power / Reset / Cls CMOS (at rear)
• EL I/O
• Q-Fan Plus
• ASUS EPU-6 Engine
• ASUS Q-Connector
• ASUS Fan Xpert
• ASUS EZ Flash 2
• ASUS CrashFree BIOS 3
• ASUS MyLogo3

• ATX Form Factor
• 30.5cm x 24.5cm

---

Das BiosDas Bios




​

---

OC VerhaltenOC Verhalten

Vom Board bereitgestellte Spannungen im Bios:

• CPU Spannung: 0.85v ~ 2.50v in 0.00625 Volt Schritten
• CPU PLL Spannung: 1.50v ~ 3.00v in 0.013 Volt Schritten; Standard 1.50 Volt
• FSB Termination Spannung: 1.10v ~ 2.00v in 0.013 Volt Schritten; Standard 65nm = 1.20 Volt / 45nm = 1.10 Volt
• DRAM Spannung: 1.50v ~ 2.80v in 0.013 Volt Schritten; Standard 1.50 Volt
• Northbridge Spannung: 1.25v ~ 2.05v in 0.013 Volt Schritten; Standard 1.25 Volt
• Southbridge 1.05v Spannung: 1.05v ~ 1.96v in 0.013 Volt Schritten; Standard 1.05 Volt
• Southbridge 1.50v Spannung: 1.05v ~ 2.05v in 0.013 Volt Schritten; Standard 1.50 Volt
• NB DDRVref: -157.5mV ~ +200mV in 10mV Schritten; Standard [AUTO]
• DDR3 Channel A/B Vref: -157.5mV ~ +200mV in 10mV Schritten; Standard [AUTO]

Biostemplate für das Extreme Tweaker Menü:

Code:

Ai Overclock Tuner:
OC From CPU Level UP:
OC From Memory Level UP:
FSB Frequency:
CPU Ratio Control:

- CPU Configuration:
- CPU Clock Skew:
- NB Clock Skew:

FSB Strap to North Bridge:
PCI-E Frequency:
DRAM Frequency:
DRAM Command Rate:
DRAM Timing Control:
- CAS# Latency:
- RAS# to CAS# Delay:
- RAS# PRE Time:
- RAS# ACT Time:
- RAS# to RAS# Delay:
- REF Cycle Time:  
- Write Recovery Time:
- Read to PRE Time: 
- Read to Write Delay(S/D): 
- Write to Read Delay(S): 
- Write to Read Delay(D):
- Read To Read Delay(S):
- Read To Read Delay(D):
- Write To Write Delay(S): 
- Write To Write Delay(D):
- Write to PRE Delay:
- Read to PRE Delay:

DRAM Static Read Control:
DRAM Dynamic Write Control:

DRAM Skew Control:
- DRAM CMD Skew on Channel A/B:
- DRAM CLK Skew on DIMM A1/A2/B1/B2:
- DRAM CTL Skew on DIMM A1/A2/B1/B2:

Ai Clock Twister:
- Ai Clock Skew for Channel A:
- Ai Clock Skew for Channel B:

Ai Transaction Booster:
- Common Performance Level:
- Pull-In of CHA PH1:
- Pull-In of CHA PH2:
- Pull-In of CHA PH3:
- Pull-In of CHA PH4:
- Pull-In of CHA PH5:
- Pull-In of CHB PH1:
- Pull-In of CHB PH2:
- Pull-In of CHB PH3:
- Pull-In of CHB PH4:
- Pull-In of CHB PH5:

EPU II Phase Control:

CPU Voltage:
Load-Line Calibration:
CPU PLL Voltage: 
FSB Termination Voltage: 

- CPU GTLVref (0):
- CPU GTLVref (1):
- CPU GTLVref (2):
- CPU GTLVref (3):

North Bridge Voltage:
DRAM Voltage:

- NB DDRVref:
- DDR3 ChannelA Vref:
- DDR3 ChannelB Vref:

South Bridge 1.5 Voltage:
South Bridge 1.05 Voltage:

CPU Spread Spectrum:
PCIE Spread Spectrum:

Ein paar OC Ergebnisse von OnePageBook (OCX)

500FSB Everest & Orthos:


600FSB Everest & Orthos:

​

Felix the Cat schrieb:

Hehe... ich lasse dich das mal testen. Aber ich werde wohl eh nun bis zum X58 warten.

PS: Das Layout des Threads kenne ich irgendwo her

Zum Vergrößern anklicken....

Hotzi1 schrieb:

Hast du das Board schon Zuhause?

Zum Vergrößern anklicken....