Frankfurter
Neuling
Hallo habe ein Gigabyte 7VRXP MoBo. Hier die Facts (Auszug):
GA-7VRXP(2.0)
VIA KT333 chipset
Processor
Socket A for AMD Athlon ™XP / Athlon ™/ Duron ™processor
Chipset
Southbridge : VIA 8233A(CE)
VIA V-Link architecture (266MB/s)
VIA VT6202 USB 2.0 controller
Super I/O : ITE IT8705F
Smart I/O : Winbond Smart@IO
Promise PDC20276 ATA 133 RAID controller
Raeltek 8100BL Ethernet 10/100Mb LAN controller
Creative CT5880 PCI sound controller
Sigmatel AC97 Codec chip
Dual BIOS
Memory
Type : DDR333 (PC2700) / DDR266 (PC2100) / DDR200 (PC1600) -184pin
Max capacity : Up to 3GB by 3 DIMM slots(DDR266/200)
I/O
1 x FDD port
4 x UDMA ATA133/100/66 Bus Master IDE ports
1 x 2ports USB 1.1 connector (by cable with rear USB bracket)
2 x 2ports USB 2.0 connector (by cable with rear USB bracket)
Memory Stick / Security Digital / Smart Card Reader connectors
2 x cooling fan pin header
H/W Monitoring
System health status auto-detect and report by BIOS
H/W detect & report power-in voltage, CPU voltage, and Fan Speed
BIOS
Dual AMI BIOS, 2 x 2M bit flash ROM
AMI BIOS with enhanced ACPI feature for PC98/Win98/Win2000/WinMe/XP compliance,
Green, PnP, DMI, INT13 (>8.4GB) and Anti-Virus functions
IDE#1~#4, SCSI, LS120, ZIP and CD-ROM bootable
AC recovery ON/OFF control
Other Features
Suspend-To-RAM (STR)
Supports USB KB/MS Wake up from S3
Poly fuse for keyboard over-current protection
Driver
VIA 4 in 1 service pack utility
Promise RAID controller driver ( includes pure ATA133 driver )
Realtek LAN driver
Creative sound driver
VIA USB 2.0 driver
Winbond Smart IO driver
Nun die Frage: Laut Gigabyte-HP läuft dieses Mainboard nicht mit AthloxXP mit 333 FSB.
Habe aber DDR333 Speicher und wollte deshalb auf Athlon XP2800 (333FSB) aufrüsten. Ich denke eigentlich ist dies doch kein Problem bei einem KT333 Mainboard - oder doch ??
Danke für Eure Antworten !!
GA-7VRXP(2.0)
VIA KT333 chipset
Processor
Socket A for AMD Athlon ™XP / Athlon ™/ Duron ™processor
Chipset
Southbridge : VIA 8233A(CE)
VIA V-Link architecture (266MB/s)
VIA VT6202 USB 2.0 controller
Super I/O : ITE IT8705F
Smart I/O : Winbond Smart@IO
Promise PDC20276 ATA 133 RAID controller
Raeltek 8100BL Ethernet 10/100Mb LAN controller
Creative CT5880 PCI sound controller
Sigmatel AC97 Codec chip
Dual BIOS
Memory
Type : DDR333 (PC2700) / DDR266 (PC2100) / DDR200 (PC1600) -184pin
Max capacity : Up to 3GB by 3 DIMM slots(DDR266/200)
I/O
1 x FDD port
4 x UDMA ATA133/100/66 Bus Master IDE ports
1 x 2ports USB 1.1 connector (by cable with rear USB bracket)
2 x 2ports USB 2.0 connector (by cable with rear USB bracket)
Memory Stick / Security Digital / Smart Card Reader connectors
2 x cooling fan pin header
H/W Monitoring
System health status auto-detect and report by BIOS
H/W detect & report power-in voltage, CPU voltage, and Fan Speed
BIOS
Dual AMI BIOS, 2 x 2M bit flash ROM
AMI BIOS with enhanced ACPI feature for PC98/Win98/Win2000/WinMe/XP compliance,
Green, PnP, DMI, INT13 (>8.4GB) and Anti-Virus functions
IDE#1~#4, SCSI, LS120, ZIP and CD-ROM bootable
AC recovery ON/OFF control
Other Features
Suspend-To-RAM (STR)
Supports USB KB/MS Wake up from S3
Poly fuse for keyboard over-current protection
Driver
VIA 4 in 1 service pack utility
Promise RAID controller driver ( includes pure ATA133 driver )
Realtek LAN driver
Creative sound driver
VIA USB 2.0 driver
Winbond Smart IO driver
Nun die Frage: Laut Gigabyte-HP läuft dieses Mainboard nicht mit AthloxXP mit 333 FSB.
Habe aber DDR333 Speicher und wollte deshalb auf Athlon XP2800 (333FSB) aufrüsten. Ich denke eigentlich ist dies doch kein Problem bei einem KT333 Mainboard - oder doch ??
Danke für Eure Antworten !!
