Follow along with the video below to see how to install our site as a web app on your home screen.
Anmerkung: this_feature_currently_requires_accessing_site_using_safari
.:AI Tweaker:.
AI Overclock Tuner [Manual]
CPU Ratio Setting [[B][COLOR="Red"]8,5[/COLOR][/B]]
FSB Frequency [[B][COLOR="Red"]450[/COLOR][/B]]
PCI-E Frequency [[B][COLOR="Red"]101[/COLOR][/B]]
FSB Strap to North Bridge [[B][COLOR="Red"]333[/COLOR][/B]]
DRAM Frequency [DDR2 - [B][COLOR="Red"]1081[/COLOR][/B]]
DRAM CLK Skew on Channel A1 [Auto]
DRAM CLK Skew on Channel A2 [Auto]
DRAM CLK Skew on Channel B1 [Auto]
DRAM CLK Skew on Channel B2 [Auto]
DRAM Timing Control [Manual]
1st Information :
CAS# Latency [[B][COLOR="Red"]5[/COLOR][/B]]
DRAM RAS# to CAS# Delay [[B][COLOR="Red"]5[/COLOR][/B]]
DRAM RAS# Precharge [[B][COLOR="Red"]5[/COLOR][/B]]
DRAM RAS# Activate to Precharge [[B][COLOR="Red"]15[/COLOR][/B]]
RAS# to RAS# Delay [Auto]
Row Refresh Cycle Time [[B][COLOR="Red"]55[/COLOR][/B]]
Write Recovery Time [Auto]
Read to Precharge Time [Auto]
2nd Information :
READ to WRITE Delay (S/D) [Auto]
Write to Read Delay (S) [Auto]
WRITE to READ Delay (D) [Auto]
READ to READ Delay (S) [Auto]
READ to READ Delay (D) [Auto]
WRITE to WRITE Delay (S) [Auto]
WRITE to WRITE Delay (D) [Auto]
3rd Information :
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
PRE to PRE Delay [Auto]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]
DRAM Static Read Control [Disabled] *
DRAM Read Training [Disabled] *
MEM. OC Charger [Enabled] *
AI Clock Twister [[B][COLOR="Red"]Light[/COLOR][/B]] *
AI Transaction Booster [Manual] *
Common Performance Level [[B][COLOR="Red"]10[/COLOR][/B]] *
Pull-In of CHA PH1 [Disabled]
Pull-In of CHA PH2 [Disabled]
Pull-In of CHA PH3 [Disabled]
Pull-In of CHA PH4 [Disabled]
Pull-In of CHB PH1 [Disabled]
Pull-In of CHB PH2 [Disabled]
Pull-In of CHB PH3 [Disabled]
Pull-In of CHB PH4 [Disabled]
******** Please key in numbers directly! ********
CPU Voltage [[B][COLOR="Red"]1,3500[/COLOR][/B]]
CPU GTL Voltage Reference (0/2) [[B][COLOR="Red"]0,630[/COLOR][/B]]
CPU GTL Voltage Reference (1/3) [[B][COLOR="Red"]0,655[/COLOR][/B]]
CPU PLL Voltage [[B][COLOR="Red"]1,54[/COLOR][/B]]
FSB Termination Voltage [[B][COLOR="Red"]1,28[/COLOR][/B]]
DRAM Voltage [[B][COLOR="Red"]2,10[/COLOR][/B]]
NB Voltage [[B][COLOR="Red"]1,28[/COLOR][/B]]
NB GTL Reference [[B][COLOR="Red"]0,660[/COLOR][/B]]
SBridge Voltage [[B][COLOR="Red"]1.10[/COLOR][/B]]
PCIE SATA Voltage [[B][COLOR="Red"]1.50[/COLOR][/B]]
************************
Load Line Calibration [Disabled] *
CPU Spread Spectrum [Disabled] *
PCIE Spread Spectrum [Disabled] *
CPU Clock Skew [Auto]
NB Clock Skew [Auto]
CPU Margin Enhancement [Optimized] *
.:Advanced - CPU Configuration:.
CPU Ratio Setting [Manual]
C1E Suppport [Disabeld]
Max CPUID Value Limit [Disabled]
Intel (R) Virtualization Tech [Disabled] *
CPU TM Function [Disabled]
Execute Disable Bit [Disabled]
Ja da hast du recht.....ich denke aber der ist die absolute Ausnahme.
Mit extrem Kühlung wären evtl. dann auch 1,12v drin, aber so ist das
auch schon extrem.
ne geht leider nich...hab mit dem qx9650 sogar 1,52v gebraucht mein extreme ist nicht so der bringer
schönes ergebnis, kannst du noch coretemp benutzen bitte, da sieht man die VID.