CPU Feature
Ai Overclock Tuner [Manual]
Ratio CMOS Setting: [8.5]
FSB Frequency [475]
FSB Strap to North Bridge [333MHz]
PCIE Frequency [101]
DRAM Settings
DRAM Frequency [1141MHz]
DRAM Command Rate [2T]
DRAM Timing Control [Manual]
CAS# Latency [5]
RAS# to CAS Delay [5]
RAS# Precharge [5]
RAS# Active Time [18]
RAS# To Ras# Delay [auto]
Row Refresh Cycle Time [45]
Write Recovery Time [auto]
Read To Precharge Time [auto]
Read To Write Delay(S/D) [8]
Write To Read Delay(S) [auto]
Write To Read Delay(D) [auto]
Read To Read Delay(S) [auto]
Read To Read Delay(D) [auto]
Write To Write Delay(S) [auto]
Write To Write Delay(D) [auto]
DRAM Static Read Control [Enabled]
Ai Clock Twister [Moderate]
Transaction Booster [Disabled]
Relax Level [1]
Voltage Settings
CPU Voltage [1.34v real]
CPU PLL Voltage [1.5v bios]
North Bridge Voltage [1.36v real]
DRAM Voltage [2.16v real]
FSB Termination Voltage [1.2v real]
South Bridge Voltage [1.050v bios]
Loadline Calibration [Disabled]
CPU GTL Reference [0.61x]
North Bridge GTL Reference [0.67x]
DDR2 Channel A REF Voltage [Auto]
DDR2 Channel B REF Voltage [Auto]
DDR2 Controller REF Voltage [DDR2_REF]
SB 1.5V Voltage [1.50v]
Danke, Leute jetzt ist er stabil und läuft super 
Gut das ich euch gefragt habe, sonst wäre bestimmt bald meine Hardware hinüber gewesen
